EN 13892-5:2003

Methods of test for screed materials - Part 5: Determination of wear resistance to rolling wheel of screed material for wearing layer

This European Standard specifies a method for determining the wear resistance to a heavily loaded rolling wheel on moulded mortar specimens made from cementitious screed- and synthetic resin screed material or optionally for other screed materials for wearing surface.

Prüfverfahren für Estrichmörtel und Estrichmassen - Teil 5: Bestimmung des Widerstandes gegen Rollbeanspruchung von Estrichen für Nutzschichten

Méthodes d'essais des matériaux de chape - Partie 5: Détermination de la résistance à l'usure par roulette pivotante des matériaux de chape avec couche d'usure

La présente Norme européenne spécifie une méthode permettant de déterminer la résistance à l'usure due au roulement d'une roue lourdement chargée, sur des éprouvettes de mortier moulées, confectionnées avec des matériaux pour chapes à base ciment ou de résine synthétique utilisés en couche d'usure. Cette méthode peut s'appliquer, le cas échéant, à d'autres matériaux de chape utilisés en couche d'usure.

Metode preskušanja za mešanice za estrih – 5. del: Določevanje odpornosti mešanice za estrih za obrabno plast proti obrabi zaradi koles

General Information

• Status: Published
• Publication Date: 03-Jun-2003
• Withdrawal Date: 30-Dec-2003
• ICS: 91.100.10 - Cement. Gypsum. Lime. Mortar
• Technical Committee: CEN/TC 303 - Floor screeds and in-situ floorings in buildings
• Drafting Committee: CEN/TC 303/WG 2 - Test methods
• Current Stage: 9020 - Submission to 2 Year Review Enquiry - Review Enquiry
• Start Date: 15-Jan-2024
• Completion Date: 15-Jan-2024
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN 13892-5:2003 - Methods of test for screed materials - Part 5: Determination of wear resistance to rolling wheel of screed material for wearing layer

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SRUQRVWLPrüfverfahren für Estrichmörtel und Estrichmassen - Teil 5: Bestimmung des Widerstandes gegen Rollbeanspruchung von Estrichen für NutzschichtenMéthodes d'essais des matériaux de chape - Partie 5: Détermination de la résistance a l'usure par roulette pivotante des matériaux de chape avec couche d'usureMethods of test for screed materials - Part 5: Determination of wear resistance to rolling wheel of screed material for wearing layer91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. MortarICS:Ta slovenski standard je istoveten z:EN 13892-5:2003SIST EN 13892-5:2003en01-september-2003SIST EN 13892-5:2003SLOVENSKI
STANDARD



SIST EN 13892-5:2003



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13892-5June 2003ICS 91.100.10English versionMethods of test for screed materials - Part 5: Determination ofwear resistance to rolling wheel of screed material for wearinglayerMéthodes d'essais des matériaux de chape - Partie 5:Détermination de la résistance à l'usure par roulettepivotante - Méthodes pour matériaux de chape aveccouche d'usurePrüfverfahren für Estrichmörtel und Estrichmassen - Teil 5:Bestimmung des Widerstandes gegen Rollbeanspruchungvon Estrichen für NutzschichtenThis European Standard was approved by CEN on 3 April 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13892-5:2003 ESIST EN 13892-5:2003



EN 13892-5:2003 (E)2ContentspageForeword.3Introduction.41Scope.42Normative references.43Symbols and abbreviations.44Principle.45Apparatus.55.1Test rig.55.1.1General.55.1.2Supporting table.55.1.3Swivel castor.55.2Suction device for removing abraded material.55.3Measuring bridge.55.4Depth gauge.56Preparation of test specimens.
...