EN 1300:2013
(Main)Secure storage units - Classification for high security locks according to their resistance to unauthorized opening
Secure storage units - Classification for high security locks according to their resistance to unauthorized opening
This European Standard specifies requirements for high security locks (HSL) for reliability, resistance to burglary and unauthorized opening with methods of testing. It also provides a scheme for classifying HSL in accordance with their assessed resistance to burglary and unauthorized opening.
It applies to mechanical and electronic HSL. The following features may be included as optional subjects but they are not mandatory:
a) recognized code for preventing code altering and/or enabling/disabling parallel codes;
b) recognized code for disabling time set up;
c) integration of alarm components or functions;
d) remote control duties;
e) resistance to attacks with acids;
f) resistance to X-rays;
g) resistance to explosives;
h) time functions.
Wertbehältnisse - Klassifizierung von Hochsicherheitsschlössern nach ihrem Widerstandswert gegen unbefugtes Öffnen
Diese Europäische Norm legt die Anforderungen an Hochsicherheitsschlösser (HSS) hinsichtlich ihrer Zuverlässigkeit, ihres Widerstandswertes gegen zerstörende Angriffe und gegen unbefugtes Öffnen sowie die Prüfverfahren fest. Sie bietet außerdem ein Schema zur Klassifizierung von Hochsicherheitsschlössern auf der Grundlage einer Bewertung ihres Widerstandswertes gegen zerstörende Angriffe und gegen unbefugtes Öffnen.
Sie gilt für mechanische und elektronische HSS. Die Schlösser dürfen die folgenden Merkmale als Option enthalten, diese sind aber nicht zwingend erforderlich:
a) Berechtigungscode zur Verhinderung einer Codeänderung und/oder der Freigabe/Sperrung eines Parallelcodes;
b) Berechtigungscode zur Freigabe einer Zeitschlossfunktion;
c) Einbau von Bauteilen oder Funktionen einer Alarmanlage;
d) Funktionen zur Fernsteuerung und -überwachung;
e) Widerstand gegen Angriffe mit Säuren;
f) Widerstand gegen Angriffe mit Röntgenstrahlung;
g) Widerstand gegen Angriffe mit Sprengstoffen;
h) Zeitfunktionen.
Unités de stockage en lieux sûrs - Classification des serrures haute sécurité en fonction de leur résistance à l'effraction
La présente Norme européenne spécifie des exigences relatives aux serrures haute sécurité (HSL) quant à leur fiabilité, leur résistance à l’effraction et leur ouverture non autorisée, ainsi que des méthodes d’essai. Elle fournit également un système de classification des HSL en fonction de leur résistance estimée à l’effraction et à l’ouverture non autorisée.
Elle s’applique aux HSL mécaniques et électroniques. Les caractéristiques suivantes peuvent être incluses en option, mais ne sont pas obligatoires :
a) un code reconnu empêchant le changement du code et/ou l’activation/désactivation de codes parallèles ;
b) un code reconnu pour l’annulation des paramètres temporels ;
c) l’intégration de composants ou de fonctions d’alarme ;
d) une fonction de contrôle à distance ;
e) la résistance à l’ouverture aux acides ;
f) la résistance aux rayons X ;
g) la résistance aux explosifs ;
h) des fonctions horaires.
Varnostne shranjevalne enote - Klasifikacija visoko varnostnih ključavnic po odpornosti proti nepooblaščenemu odpiranju
Ta evropski standard določa zahteve visoko varnostnih ključavnic po zanesljivosti, protivlomni odpornosti in odpornosti proti nepooblaščenemu odpiranju s preskusnimi metodami. Prav tako zagotavlja shemo za klasifikacijo visoko varnostnih ključavnic v skladu z njihovo ocenjeno protivlomno odpornostjo in odpornostjo proti nepooblaščenemu odpiranju. Velja za mehanske in elektronske visoko varnostne ključavnice. Vključijo se lahko naslednje neobvezne značilnosti: a) priznana koda, ki onemogoča spreminjanje kode in/ali omogočanje/onemogočanje paralelnih kod; b) priznana koda za onemogočanje nastavitve časa; c) integracija komponent in funkcij alarmnega sistema; d) daljinsko upravljanje; e) odpornost na napade s kislinami; f) odpornost na rentgenske žarke; g) odpornost na eksplozive; h) funkcije časa.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Wertbehältnisse - Klassifizierung von Hochsicherheitsschlössern nach ihrem Widerstandswert gegen unbefugtes ÖffnenUnités de stockage en lieux sûrs - Classification des serrures haute sécurité en fonction de leur résistance à l'éffractionSecure storage units - Classification for high security locks according to their resistance to unauthorized opening35.220.99Druge naprave za shranjevanje podatkovOther data storage devices13.310Varstvo pred kriminalomProtection against crimeICS:Ta slovenski standard je istoveten z:EN 1300:2013SIST EN 1300:2014en,fr,de01-julij-2014SIST EN 1300:2014SLOVENSKI
STANDARDSIST EN 1300:2004+A1:20111DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1300
November 2013 ICS 13.310 Supersedes EN 1300:2004+A1:2011English Version
Secure storage units - Classification for high security locks according to their resistance to unauthorized opening
Unités de stockage en lieux sûrs - Classification des serrures haute sécurité en fonction de leur résistance à l'effraction
Wertbehältnisse - Klassifizierung von Hochsicherheitsschlössern nach ihrem Widerstandswert gegen unbefugtes Öffnen This European Standard was approved by CEN on 14 May 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1300:2013 ESIST EN 1300:2014
Parameters for installation and operating instructions . 33 Annex B (normative)
Determination of manipulation resistance due to the design requirement . 35 Annex C (normative)
Manufacturer’s Declaration (applies only to key operated locks) . 42 Annex D (informative)
Lock dimensions . 43 Annex E (informative)
A-deviations . 44 Bibliography . 46 SIST EN 1300:2014
addition of definitions (Clause 3) and requirements (subclause 5.1.7) for cryptography in distributed security systems;
updating references to newer versions; changing of the requirements for the input unit (subclause 5.1.5.4); updating the test specimen of keys to a middle key cut design (subclause 7.3); clarification and optimization of the immersion test (subclause 8.2.6.3); correction of the heat resistance test (subclause 8.2.7.2); editorial clarifications among others in subclauses 5.1.5.1, 5.2.7, 5.3.3, 7.1, 8.2.2.1, 8.2.4.3.2, 8.2.6.2 and 8.3.3.3.2;
addition of parameters for operating instructions in Annex A. This document reflects the market demand to include requirements for distributed systems and electronic tokens and responds to the state of the art requirements when it was written down.
This European Standard has been prepared by Working Group 3 of CEN/TC 263 as one of a series of standards for secure storage of cash valuables and data media. Other standards in the series are, among others: EN 1047-1, Secure storage units — Classification and methods of test for resistance to fire — Part 1: Data cabinets and diskette inserts EN 1047-2, Secure storage units — Classification and methods of test for resistance to fire — Part 2: Data rooms and data container EN 1143-1, Secure storage units — Requirements, classification and methods of test for resistance to burglary — Part 1: Safes, ATM safes, strongroom doors and strongrooms SIST EN 1300:2014
Codes can be entered into an HSL for comparison with memorized codes (processing unit). A correct match of an opening code allows movement of a blocking feature. 3.2 code identification information required which can be entered into a HSL and which, if correct, enables the security status of the HSL to be changed 3.2.1 opening code identification information which allows the HSL to be opened 3.2.2 recognized code identification information which allows access to the processing unit and which may also be an opening code 3.2.3 duress code parallel code which initiates some additional function 3.2.4 parallel code opening code which has identical function to that of an existing opening code but constructed of different figures 3.3 coding means method by which the code is held 3.3.1 material code code defined by the physical features or other properties of a token SIST EN 1300:2014
An electronic token incorporates an integrated circuit containing volatile and non-volatile memory, associated software and in many cases a microcontroller which communicates with an input unit by contact or contactless means. 3.8 mechanical HSL HSL which is secured by means of mechanical elements only 3.9 electronic HSL HSL which is secured partly or fully by electrical or electronic elements 3.10 blocking feature part of a HSL which, after inputting the correct opening code moves, or can be moved Note 1 to entry:
A blocking feature either secures a door or prevents movement of a boltwork. The bolt of a mechanical lock is an example of a blocking feature. 3.11 destructive burglary attack which damages the HSL in such a manner that it is irreversible and cannot be hidden from the authorized user 3.12 reliability ability to function and achieve the security requirements of this standard after a large number of duty cycles SIST EN 1300:2014
A HSL may function after manipulation although its securit
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.