EN 17116-4:2019

Specifications for industrial laundry machines - Definitions and testing of capacity and consumption characteristics - Part 4: Washer-extractors

This document defines the characteristics of washer-extractors and gives the usual test methods for these characteristics with regard to machine capacity, power consumption and productivity. It is applicable for use as a reference in the drafting of purchasing orders for washer-extractors whose net usable cage volume is 400 dm3 (litres) respectively 40 kg and above. In addition, it is recommended for determination of energy consumption and productivity according to Directive 2009/125 EC. Furthermore, the document describes standard methods for measuring principal performance characteristics of washer-extractors. It does not cover safety requirements (see EN ISO 10472-2).

Anforderungen an industrielle Wäschereimaschinen - Definition und Prüfung von Kapazitäts- und Verbrauchsmerkmalen - Teil 4: Waschschleudermaschinen

Dieses Dokument definiert die Gebrauchseigenschaften von Waschschleudermaschinen und gibt die üblichen Verfahren zur Prüfung dieser Eigenschaften mit Bezug auf die Maschinenbeladung, den Energie-verbrauch und die Produktionsmenge an. Es dient zur Orientierung bei der Erstellung von Kaufaufträgen für Waschschleudermaschinen, deren nutzbares Nettovolumen der Trommel 400 dm3 (Liter) bzw. 40 kg und mehr beträgt. Außerdem wird es zur Bestimmung des Energieverbrauchs und der Produktionsmenge entsprechend der Richtlinie 2009/125/EG empfohlen. Darüber hinaus beschreibt das Dokument Standard¬verfahren für die Messung grundlegender Gebrauchseigenschaften von Waschschleudermaschinen. Es behandelt keine Sicherheitsanforderungen (siehe EN ISO 10472 2).

Spécifications pour les machines de blanchisserie industrielles - Définitions et contrôle des caractéristiques de capacité et de consommation - Partie 4 : Laveuses-essoreuses

Le présent document définit les caractéristiques des laveuses-essoreuses et spécifie les méthodes d'essai usuelles pour la détermination de ces caractéristiques, relatives à la capacité, à la consommation d'énergie et à la production horaire de ces machines. Elle sert de référence pour la rédaction des offres d'achat et des commandes pour les laveuses-essoreuses dont le volume utile de tambour est supérieur ou égale à 400 dm3 (litres) ou 40 kg. De plus, elle est recommandée pour la détermination de la consommation d'énergie et de la production horaire conformément à la Directive 2009/125 EC. Par ailleurs, le document décrit des méthodes normalisées pour mesurer les principales caractéristiques de performance des laveuses-essoreuses. Elle ne traite pas des exigences de sécurité (voir l'EN ISO 10472 2).

Specifikacije za industrijske pralnice strojev - Definicije in preskušanje zmogljivosti ter značilnosti porabe - 4. del: Ožemalniki

Ta osnutek evropskega standarda določa značilnosti ožemalnikov in podaja običajne preskusne metode za te značilnosti v zvezi z zmogljivostjo strojev, porabo energije in produktivnostjo. Uporablja se kot referenca pri pripravi naročilnic za ožemalnike, katerih neto uporabna prostornina kletke je 400 dm3 (litrov) oziroma 40 kg ali več. Poleg tega se priporoča za določanje porabe energije in produktivnosti v skladu z Direktivo 2009/125/ES. Standard opisuje standardne metode za merjenje glavnih značilnosti delovanja ožemalnikov. Ne vključuje varnostnih zahtev (glej EN ISO 10472-2).

General Information

• Status: Published
• Publication Date: 02-Jul-2019
• Withdrawal Date: 30-Jan-2020
• ICS: 97.060 - Laundry appliances
• Technical Committee: CEN/TC 214 - Textile machinery and allied machinery
• Drafting Committee: CEN/TC 214/WG 5 - Eco Design ENER Lot 24 Performance Measurement of Washing Machines and Dryer for industrial use
• Current Stage: 9020 - Submission to 2 Year Review Enquiry - Review Enquiry
• Start Date: 15-Oct-2024
• Completion Date: 15-Oct-2024
• Directive: 2009/125/EC - Directive 2005/32/EC of the European Parliament and of the Council of 6 July 2005 establishing a framework for the setting of ecodesign requirements for energy-using products and amending Council Directive 92/42/EEC and Directives 96/57/EC and 2000/55/EC of the European Parliament and of the Council
• Directive: 2010/30/EU - DIRECTIVE 2010/30/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 19 May 2010 on the indication by labelling and standard product information of the consumption of energy and other resources by energy-related products (recast)
• Mandate: M/539 - [C(2015)8756] Standardization request on Ecodesign and energy labelling of non-household washing machines, dryers and dishwashers
• Ref Project: SIST EN 17116-4:2020 - Specifications for industrial laundry machines - Definitions and testing of capacity and consumption characteristics - Part 4: Washer-extractors

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2020
Specifikacije za industrijske pralnice strojev - Definicije in preskušanje
zmogljivosti ter značilnosti porabe - 4. del: Ožemalniki
Specifications for industrial laundry machines - Definitions and testing of capacity and
consumption characteristics - Part 4: Washer-extractors
Anforderungen an industrielle Wäschereimaschinen - Definition und Prüfung von
Kapazitäts- und Verbrauchsmerkmalen - Teil 4: Waschschleudermaschinen
Spécifications pour les machines de blanchisserie industrielles - Définitions et contrôle
des caractéristiques de capacité et de consommation - Partie 4 : Laveuses-essoreuses
Ta slovenski standard je istoveten z: EN 17116-4:2019
ICS:
97.060 Aparati za nego perila Laundry appliances
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 17116-4
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2019
EUROPÄISCHE NORM
ICS 97.060
English Version
Specifications for industrial laundry machines - Definitions
and testing of capacity and consumption characteristics -
Part 4: Washer-extractors
Spécifications pour les machines de blanchisserie Festlegungen für Wäschereimaschinen - Definition und
industrielles - Définitions et contrôle des Prüfung der Beladung und Verbrauchsmerkmale - Teil
caractéristiques de capacité et de consommation - 4: Waschschleudermaschinen
Partie 4 : Laveuses-essoreuses
This European Standard was approved by CEN on 17 September 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17116-4:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 6
1 Scope . 7
2 Normative references . 7
3 Terms, definitions and symbols . 8
3.1 Terms and definitions . 8
3.2 Symbols and abbreviations . 11
4 Requirements . 15
4.1 General . 15
4.2 Nominal load . 16
5 General test conditions . 16
5.1 General . 16
5.2 Reference machine . 16
5.3 Ambient conditions . 16
5.3.1 Ambient temperature and humidity . 16
5.3.2 Water supply . 16
5.3.3 Energy supply . 17
5.3.4 Electricity supply . 17
5.3.5 Compressed air supply . 17
5.3.6 Steam supply . 17
5.3.7 Condition of the machine . 18
5.4 Machine/test load . 18
5.4.1 General . 18
5.4.2 Weight of load . 18
5.4.3 Number of test runs . 18
5.4.4 Nature of nominal load. 19
5.4.5 Stain and soil monitors . 19
5.4.6 Wash process control sheets . 20
5.4.7 Rinse performance fabrics . 21
5.4.8 Addition of the test fabrics. 21
5.5 Detergent . 22
5.5.1 General . 22
5.5.2 Specification of detergent system . 22
5.6 Washing programme . 23
5.6.1 Washing programme in test machine . 23
5.6.2 Washing programme for barrier washers . 23
5.7 Washing conditions in reference machine. 23
6 Preparation for testing . 24
6.1 General . 24
6.2 Preparation for the washer-extractor to be tested . 24
6.2.1 Installation of the washer-extractor . 24
6.2.2 Preparation of the washer-extractor for a test series . 24
6.2.3 Preparation of the washer-extractor for a test run . 24
6.3 Preparation of the reference machine . 24
6.4 Preparation of the nominal load . 25
6.4.1 General . 25
6.4.2 Bone dry-conditioning . 25
7 Determination of wash performance . 25
7.1 General . 25
7.2 Determination of moisture content mcsl of the soiled load . 26
7.3 Determination of the corrected weight of the nominal load W . 26
c
7.4 Test procedure . 27
7.5 Primary wash performance . 28
7.5.1 General . 28
7.5.2 Expression of results . 28
7.6 Secondary wash performance . 30
7.6.1 General . 30
7.6.2 Expression of results . 31
7.7 Rinse performance . 31
7.7.1 General . 31
7.7.2 Expression of results . 32
8 Determination of energy consumption. 32
8.1 General . 32
8.2 Test procedure . 33
8.3 Determination of electrical energy . 33
8.4 Determination of steam and gas consumption . 33
8.5 Expression of results . 34
9 Determination of water consumption . 36
9.1 General . 36
9.2 Test procedure . 36
9.3 Expression of results . 36
10 Determination of detergent consumption . 37
10.1 General . 37
10.2 Test procedure . 37
10.3 Expression of results .
...