EN ISO 8230-1:2008
(Main)Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008)
Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008)
ISO 8230-1:2008 specifies common safety requirements for dry-cleaning machines. It is applicable to dry-cleaning machines of all sizes intended for industrial and commercial use for the cleaning of articles made of textile, leather, furs and skins, using exclusively either perchloroethylene or combustible solvent as the cleaning medium.
It is not applicable to: machines placed at the disposal of the general public (self-service); barrier machines; transfer machines; ironing presses (see ISO 10472-1 and ISO 10472-6); ancillary equipment, e.g. room ventilation equipment, waste recuperation systems of the still, external water cooling systems or external systems for solvent recovery from the still sludge.
ISO 8230-1:2008 deals with all significant hazards arising from the use of the dry‑cleaning machine, where “use of the dry‑cleaning machine” comprises both intended use and foreseeable abnormal situations and includes commissioning, use and maintenance. It defines the common safety requirements for dry‑cleaning machines and is intended to be used in conjunction with ISO 8230‑2 and ISO 8230‑3, as relevant. Specific requirements in ISO 8230‑2 and ISO 8230‑3 take precedence over the respective requirements of ISO 8230-1.
ISO 8230-1:2008 does not deal with hazards caused by processing items that can create an explosive atmosphere (e.g. printers' wipers containing a low-flash solvent), nor with machines processing loads that can contain “foreign solvents”, which could lead to a change in a property (characteristic) of the cleaning solvent, e.g. cause foaming or make it carcinogenic.
Sicherheitsanforderungen für Textilreinigungsanlagen - Teil 1: Allgemeine Sicherheitsanforderungen (ISO 8230-1:2008)
Dieser Teil der ISO 8230 legt gemeinsame Sicherheitsanforderungen für Textilreinigungsmaschinen fest.
Er gilt für Textilreinigungsmaschinen jeder Größe, die für industrielle und gewerbliche Nutzung zur Reinigung von Ware aus Textilien, Leder, Pelzen oder Häuten bestimmt sind und in denen ausschließlich Perchlorethylen oder entzündbare Lösungsmittel als Reinigungsmittel verwendet werden.
Dieser Teil der Internationalen Norm gilt nicht für:
Maschinen, die allgemein zugänglich sind (Selbstbedienung);
Maschinen für Trennwandeinbau wie in 3.1.5 definiert;
Umlademaschinen wie in 3.1.4 definiert;
Bügelpressen (siehe ISO 10472 1 und ISO 10472 6);
Zusatzeinrichtungen, z. B. raumlufttechnische Anlagen, Aufbereitungssysteme für Abfall aus dem Destillierbehälter, externe Wasserkühlsysteme oder externe Rückgewinnungssysteme für Lösungsmittel aus den Destillierrückständen.
Dieser Teil der ISO 8230 befasst sich mit allen wesentlichen Gefährdungen, die bei der Nutzung der Textilreinigungsmaschine entstehen, wobei „Nutzung der Textilreinigungsmaschine“ sowohl den bestimmungsgemäßen Gebrauch als auch vorhersehbare ungewöhnliche Betriebszustände umfasst und Inbetriebnahme, Nutzung und Wartung einschließt. Er definiert die gemeinsamen Sicherheitsanforderungen für Textilreinigungsmaschinen und ist, soweit zutreffend, für die Nutzung in Verbindung mit ISO 8230-2 und ISO 8230-3 vorgesehen. Spezielle Anforderungen in den anderen Teilen der ISO 8230 haben Vorrang vor den entsprechenden Anforderungen dieses Teils der ISO 8230.
Er befasst sich weder mit Gefährdungen, die von Ware verursacht werden, die eine explosionsfähige Atmosphäre verursachen kann (z. B. Putztücher aus Druckereien, die leicht entzündbare Lösungsmittel enthalten) noch mit Maschinen, die Ware bearbeiten, die „fremde Lösungsmittel“ enthalten kann, die zur Veränderung der Eigenschaften (Merkmale) des Lösungsmittels zur Reinigung führen könnten, z. B.
Exigences de sécurité pour les machines de nettoyage à sec - Partie 1: Exigences générales de sécurité (ISO 8230-1:2008)
L'ISO 8230-1:2008 spécifie les exigences générales de sécurité pour les machines de nettoyage à sec.
Elle est applicable aux machines de nettoyage à sec de toutes tailles, à usage industriel et commercial, prévues pour le nettoyage des articles faits en textile, cuir, peaux ou fourrures, utilisant exclusivement le perchloroéthylène ou un solvant inflammable comme produit de nettoyage.
L'ISO 8230-1:2008 n'est pas applicable aux machines de nettoyage à sec mises à la disposition du public (libres-services); aux machines de nettoyage à sec barrière; aux machines de nettoyage à sec à transfert; aux presses à repasser (voir l'ISO 10472‑1 et l'ISO 10472‑6); aux équipements auxiliaires, par exemple les systèmes de renouvellement d'air du local ou de récupération des déchets provenant du distillateur, l'unité extérieure de refroidissement d'eau ou les systèmes de récupération complémentaires de solvant provenant des boues de distillation.
L'ISO 8230-1:2008 identifie tous les phénomènes dangereux significatifs résultant de l'utilisation de la machine de nettoyage à sec, ce qui comprend à la fois l'utilisation normale et les mauvais usages prévisibles, et inclut la fourniture, l'utilisation et la maintenance. Elle spécifie les exigences de sécurité communes pour les machines de nettoyage à sec et est destinée à être utilisée conjointement avec l'ISO 8230‑2 et l'ISO 8230‑3, selon le cas. Les exigences spécifiques de l'ISO 8230‑2 et de l'ISO 8230‑3 prévalent sur les exigences correspondantes de l'ISO 8230-1:2008.
Elle ne couvre pas les phénomènes dangereux engendrés par des articles traités pouvant créer des vapeurs explosives (comme les chiffons d'imprimerie contenant des solvants à point d'éclair bas), ni les machines de nettoyage à sec traitant du linge pouvant contenir des solvants étrangers capables de modifier les propriétés caractéristiques du solvant de nettoyage (le transformant en produit moussant ou produit cancérigène, par exemple).
Varnostne zahteve za stroje za kemično čiščenje - 1. del: Skupne varnostne zahteve (ISO 8230-1:2008)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.YDUQRVWQHSicherheitsanforderungen an Textilreinigungsanlagen - Teil 1: Allgemeine Sicherheitsanforderungen (ISO 8230-1:2008)Exigences de sécurité pour les machines de nettoyage a sec - Partie 1: Exigences générales de sécurité (ISO 8230-1:2008)Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008)97.060Aparati za nego perilaLaundry appliancesICS:Ta slovenski standard je istoveten z:EN ISO 8230-1:2008SIST EN ISO 8230-1:2009en,fr01-april-2009SIST EN ISO 8230-1:2009SLOVENSKI
STANDARDSIST EN ISO 8230:20001DGRPHãþD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 8230-1October 2008ICS 97.060Supersedes EN ISO 8230:1997
English VersionSafety requirements for dry-cleaning machines - Part 1:Common safety requirements (ISO 8230-1:2008)Exigences de sécurité pour les machines de nettoyage àsec - Partie 1: Exigences générales de sécurité (ISO 8230-1:2008)Sicherheitsanforderungen an Textilreinigungsanlagen - Teil1: Allgemeine Sicherheitsanforderungen (ISO 8230-1:2008)This European Standard was approved by CEN on 13 September 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 8230-1:2008: ESIST EN ISO 8230-1:2009
Relationship between this International Standard and the Essential Requirements of EU Directive 98/37/EC.4 Annex ZB (informative)
Relationship between this International Standard and the Essential Requirements of EU Directive 2006/42/EC.5
Relationship between this International Standard and the Essential Requirements of EU Directive 98/37/EC This International Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide one means of conforming to Essential Requirements of the New Approach Directive 98/37/EC, Machinery, amended by 98/79/EC.
Once this standard is cited in the Official Journal of the European Communities under that Directive and has been implemented as a national standard in at least one Member State, compliance with the normative clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements of that Directive and associated EFTA regulations.
WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard.
Relationship between this International Standard and the Essential Requirements of EU Directive 2006/42/EC This International Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide one means of conforming to Essential Requirements of the New Approach Directive 2006/42/EC, Machinery.
Once this standard is cited in the Official Journal of the European Communities under that Directive and has been implemented as a national standard in at least one Member State, compliance with the normative clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements of that Directive and associated EFTA regulations.
WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard.
Reference numberISO 8230-1:2008(E)© ISO 2008
INTERNATIONAL STANDARD ISO8230-1First edition2008-10-01Safety requirements for dry-cleaning machines — Part 1: Common safety requirements Exigences de sécurité pour les machines de nettoyage à sec — Partie 1: Exigences générales de sécurité
ISO 8230-1:2008(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
©
ISO 2008 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
copyright@iso.org Web
www.iso.org Published in Switzerland
ii © ISO 2008 – All rights reserved
ISO 8230-1:2008(E) © ISO 2008 – All rights reserved iiiContents Page Foreword.iv Introduction.v 1 Scope.1 2 Normative references.1 3 Terms and definitions.3 3.1 Machine configuration.3 3.2 Machine components.4 3.3 Operating phases.5 3.4 Miscellaneous.5 4 Safety requirements and/or protective measures.7 4.1 Mechanical hazards.7 4.2 Thermal hazards.8 4.3 Noise hazards.9 4.4 Vibration hazards.10 4.5 Hazards due to neglect of ergonomic principles in machine design.10 4.6 Hazards related to emergency stop and lack of cooling.10 4.7 Hazards related to energy supply disconnection.10 4.8 Hazards related to failure of the power supply, other supplies, control system.11 4.9 Electrical hazards.11 4.10 Hazards generated by solvents.12 4.11 Hazards related to loss of stability.15 4.12 Hazards related to falling from a higher level.15 4.13 Hazards related to the refrigeration system.15 5 Verification of the safety requirements and/or protective measures.16 6 Information for use.17 6.1 General.17 6.2 Signals and warning devices.17 6.3 Instruction handbook.17 6.4 Marking.21 Annex A (normative)
Noise measurement.22 Annex B (informative)
List of significant hazards.27 Bibliography.29
ISO 8230-1:2008(E) iv © ISO 2008 – All rights reserved Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 8230-1 was prepared by Technical Committee ISO/TC 72, Textile machinery and accessories, Subcommittee SC 5, Industrial laundry and dry-cleaning machinery and accessories. This first edition of ISO 8230-1,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.