EN 3080:2006

Aerospace series - Pipe coupling 8°30' in titanium alloy - Tees, reduced, branch with thrust wire nut

This standard specifies the characteristics of tees, reduced, branch with thrust wire nut, for pipe couplings 8°30', in titanium alloy, for aerospace applications.
Nominal pressure: up to 28 000 kPa.
Temperature range: - 55 °C to 135 °C.

Luft- und Raumfahrt - Rohrverschraubung 8°30' aus Titanlegierung - T-Verschraubungen, reduziert, seitlicher Auslass mit Mutter mit Schubdraht

Diese Norm legt die Eigenschaften von T Verschraubungen, reduziert, mit seitlichem Auslass mit Mutter mit Schubdraht, für Rohrverschraubungen 8°30', aus Titanlegierung, für Anwendungen in der Luft- und Raumfahrt fest.
Nenndruck: bis zu 28 000 kPa.
Temperaturbereich: -55 °C bis 135 °C.

Série aérospatiale - Système de raccordement 8°30' en alliage de titane - Raccords en té, de réduction branche avec écrou à jonc

Aeronavtika - Cevni priključek 8°30' iz titanove zlitine - T-priključki, reducirani, izpust z matico s potisno žico

General Information

• Status: Published
• Publication Date: 18-Jul-2006
• Withdrawal Date: 30-Jan-2007
• ICS: 49.080 - Aerospace fluid systems and components
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3 - Mechanical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 31-May-2017
• Ref Project: SIST EN 3080:2009 - Aerospace series - Pipe coupling 8°30' in titanium alloy - Tees, reduced, branch with thrust wire nut

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Rohrverschraubung 8°30' aus Titanlegierung - T-Verschraubungen, reduziert, seitlicher Auslass mit Mutter mit SchubdrahtSérie aérospatiale - Système de raccordement 8°30' en alliage de titane - Raccords en té, de réduction branche avec écrou à joncAerospace series - Pipe coupling 8°30' in titanium alloy - Tees, reduced, branch with thrust wire nut49.080Aerospace fluid systems and components49.025.30TitanTitaniumICS:Ta slovenski standard je istoveten z:EN 3080:2006SIST EN 3080:2009en,de01-julij-2009SIST EN 3080:2009SLOVENSKI
STANDARD



SIST EN 3080:2009



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3080
July 2006 ICS 49.080 English Version
Aerospace series - Pipe coupling 8°30' in titanium alloy - Tees, reduced, branch with thrust wire nut
Série aérospatiale - Système de raccordement 8°30' en alliage de titane - Raccords en té, de réduction branche avec écrou à jonc
Luft- und Raumfahrt - Rohrverschraubung 8°30' aus Titanlegierung - T-Verschraubungen, reduziert, seitlicher Auslass mit Mutter mit Schubdraht This European Standard was approved by CEN on 13 January 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3080:2006: ESIST EN 3080:2009



EN 3080:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Required characteristics.5 4 Designation.10 5 Marking.10 6 Technical specification.10
SIST EN 3080:2009



EN 3080:2006 (E)
3 Foreword This European Standard (EN 3080:2006) has been prepared by the AeroSpace
and Defense Industries As-sociation of Europe — Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has re-ceived the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2007, and conflicting national standards shall be withdrawn at the latest by January 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Den-mark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxem-bourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzer-land and the United Kingdom.
SIST EN 3
...