EN 13445-3:2002/A8:2006

Unfired pressure vessels - Part 3: Design

Flat walls supported by stays, stay tubes and other reinforcing elements (only unstayed flat walls are now provided)

Unbefeuerte Druckbehälter - Teil 3: Konstruktion

Récipients sous pression non soumis à la flamme - Partie 3: Conception

Neogrevane tlačne posode – 3. del: Konstruiranje

General Information

• Status: Withdrawn
• Publication Date: 18-Apr-2006
• Withdrawal Date: 28-Jul-2009
• ICS: 23.020.30 - Pressure vessels, gas cylinders
• Technical Committee: CEN/TC 54 - Unfired pressure vessels
• Drafting Committee: CEN/TC 54/WG 53 - C - Design methods
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 29-Jul-2009
• Completion Date: 29-Jul-2009
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 13445-3:2002/A8:2006 - Unfired pressure vessels - Part 3: Design

Relations

• Replaced By: EN 13445-3:2009 - Unfired pressure vessels - Part 3: Design
• Effective Date: 08-Jun-2022
• Amends: EN 13445-3:2002 - Unfired pressure vessels - Part 3: Design
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13445-3:2002/A8:2006
01-oktober-2006
1HRJUHYDQHWODþQHSRVRGH±GHO.RQVWUXLUDQMH
Unfired pressure vessels - Part 3: Design
Unbefeuerte Druckbehälter - Teil 3: Konstruktion
Récipients sous pression non soumis a la flamme - Partie 3: Conception
Ta slovenski standard je istoveten z: EN 13445-3:2002/A8:2006
ICS:
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
SIST EN 13445-3:2002/A8:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 13445-3:2002/A8
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2006
ICS 23.020.30

English Version
Unfired pressure vessels - Part 3: Design
Récipients sous pression non soumis à la flamme - Partie Unbefeuerte Druckbehälter - Teil 3: Konstruktion
3: Conception
This amendment A8 modifies the European Standard EN 13445-3:2002; it was approved by CEN on 26 October 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13445-3:2002/A8:2006: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN 13445-3:2002/A8:2006 (E)
Contents Page
Foreword .3
21 Design Rules For Reinforced Flat Walls .4
21.1 General .4
21.2 Stayed Flat Walls .4
21.3 Specific Definitions for Stayed Flat Walls.4
21.4 Required Thickness of Stayed Flat Walls .4
21.5 Required Dimensions and Layout of Staybolts and Stays .4
21.6 Requirements For Threaded Staybolts .5
21.7 Requirements For Welded-in Staybolts And Welded Stays .5
21.8 Tables for Stayed Flat Walls .6
21.9 Figures for Stayed Flat Walls.7
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 97/23/EC .10

2

---------------------- Page: 3 ----------------------

EN 13445-3:2002/A8:2006 (E)
Foreword
This European Standard (EN 13445-3:2002/A8:2006) has been prepared by Technical Committee CEN/TC 54
“Unfired pressure vessels”, the secretariat of which is held by BSI.
This Amendment to the European Standard EN 13445-3:2002 shall be given the status of a national standard,
either by publication of an identical text or by endorsement, at the latest by October 2006, and conflicting
national standards shall be withdrawn at the latest by October 2006.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU D
...