EN 3841-307:2004
(Main)Aerospace series - Circuit breakers - Test methods - Part 307: Performance with a locked tripping system
Aerospace series - Circuit breakers - Test methods - Part 307: Performance with a locked tripping system
This standard specifies a method of verifying the performance of circuit breakers with a locked tripping system.
It shall be used together with EN 3841-100.
The test is intended to estimate the consequences of a trip failure in the case of a short-circuit.
Luft- und Raumfahrt - Schutzschalter - Prüfverfahren - Teil 307: Verhalten mit blockiertem Auslösesystem
Série aérospatiale - Disjoncteurs - Méthodes d'essais - Partie 307 : Comportement avec mécanisme bloqué
Aeronavtika - Odklopniki - 307. del: Lastnosti pri blokiranem prožilnem sistemu
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2005
Aeronavtika - Odklopniki - 307. del: Lastnosti pri blokiranem prožilnem sistemu
Aerospace series - Circuit breakers - Test methods - Part 307: Performance with a
locked tripping system
Luft- und Raumfahrt - Schutzschalter - Prüfverfahren - Teil 307: Verhalten mit
blockiertem Auslösesystem
Série aérospatiale - Disjoncteurs - Méthodes d'essais - Partie 307 : Comportement avec
mécanisme bloqué
Ta slovenski standard je istoveten z: EN 3841-307:2004
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 3841-307
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2004
ICS 49.060
English version
Aerospace series - Circuit breakers - Test methods - Part 307:
Performance with a locked tripping system
Série aérospatiale - Disjoncteurs - Méthodes d'essais - Luft- und Raumfahrt - Schutzschalter - Prüfverfahren - Teil
Partie 307 : Comportement avec mécanisme bloqué 307: Verhalten mit blockiertem Auslösesystem
This European Standard was approved by CEN on 10 September 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3841-307:2004: E
worldwide for CEN national Members.
Contents Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Method .4
3.1 General conditions .4
3.2 Test mounting .4
3.3 Test circuit.4
3.4 Procedure
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.