CEN/TS 15480-1:2007
(Main)Identification card systems - European Citizen Card - Part 1: Physical, electrical and transport protocol characteristics
Identification card systems - European Citizen Card - Part 1: Physical, electrical and transport protocol characteristics
This Technical Specification specifies Electronic Citizen Card (ECC) requirements. The ECC, is a smart card issued under the authority of a government institution, either national or local and carries credentials in order to provide all or part of the following services:
1) verify the identity;
2) act as an Inter-European Union travel document;
3) facilitate logical access to e-government or local administration services.
A public administration authority may entitle a private organisation to provide all or part of the ECC services.
This Technical Specification is intended to offer the card issuer with a great deal of flexibility for the ECC specification, in connection with the services that the ECC provides, the authentication mechanisms supported and the national specific public policy with an special concern to protect the citizen privacy according to the applicable European legislation.
The requirements described in this Technical Specification are used to:
a) define a plastic body card with associated physical and logical securities;
b) specify the electrical interface and data transport protocols for the ECC;
c) support the basic set of Identification and, authentication elements visible at the card surface.
This Technical Specification also contains a possible methodology for ECC durability testing in informative Annex B.
This Technical Specification refers to the European legislation and regulations in effect.
Identifikationskartensysteme - Europäische Bürgerkarte - Teil 1: Physikalische, elektrische und transportprotokollbezogene Merkmale
Diese Technische Spezifikation legt die Anforderungen an die Electronic Citizen Card (elektronische Bürgerkarte, ECC) fest. Die ECC ist eine Chipkarte, die von einer nationalen oder lokalen Behörde ausgegeben wird und Berechtigungsnachweise enthält, um eine oder alle der folgenden Leistungen zu ermöglichen:
Identitätsüberprüfung;
Einsatz als Reisedokument innerhalb der Europäischen Union;
Erleichterung des logischen Zugangs zu E Government Diensten oder Diensten lokaler Verwaltungseinrichtungen.
Eine private Organisation kann von einer öffentlichen Verwaltungsbehörde die Genehmigung erhalten, die ECC bezogenen Dienstleistungen ganz oder teilweise zu erbringen.
Diese Technische Spezifikation soll dem Ausgeber der Karte hinsichtlich der durch die ECC ermöglichten Dienstleistungen, der unterstützten Authentifizierungsmechanismen und der nationalen Regelungen, die den Schutz der Privatsphäre der Bürger entsprechend den geltenden europäischen Gesetzen betreffen, ein hohes Maß an Flexibilität in Bezug auf die ECC Spezifikation bieten.
Die in diesem Teil dieser Technischen Spezifikation beschriebenen Anforderungen dienen zur:
Definition einer aus Kunststoff gefertigten Karte mit entsprechenden physikalischen und logischen Sicherheitsmerkmalen;
Festlegung der elektrischen Schnittstelle und der Datentransportprotokolle für die ECC;
Unterstützung des auf der Kartenoberfläche sichtbaren Basissatzes von Identifizierungs und Authentifizierungselementen.
Darüber hinaus legt dieser Teil der Technischen Spezifikation in Anhang B eine Methodik für die Dauerhaftigkeitsprüfungen von ECC fest.
Systèmes des cartes d'identification - Carte Européenne du Citoyen - Partie 1: Caractéristiques physiques, électriques et protocoles de transmission
Sistemi z identifikacijskimi karticami - Kartica evropskih državljanov - 1. del: Fizične, električne in transportne značilnosti protokola
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2009
6LVWHPL]LGHQWLILNDFLMVNLPLNDUWLFDPL.DUWLFDHYURSVNLKGUåDYOMDQRYGHO
)L]LþQHHOHNWULþQHLQWUDQVSRUWQH]QDþLOQRVWLSURWRNROD
Identification card systems - European Citizen Card - Part 1: Physical, electrical and
transport protocol characteristics
Identifikationskartensysteme - Europäische Bürgerkarte - Teil 1: Physikalische,
elektrische und transportprotokollbezogene Merkmale
Systèmes des cartes d'identification - Carte Européenne du Citoyen - Partie 1:
Caractéristiques physiques, électriques et protocoles de transmission
Ta slovenski standard je istoveten z: CEN/TS 15480-1:2007
ICS:
35.240.15 Identifikacijske kartice in Identification cards and
sorodne naprave related devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
TECHNICAL SPECIFICATION
CEN/TS 15480-1
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
April 2007
ICS 35.240.15
English Version
Identification card systems - European Citizen Card - Part 1:
Physical, electrical and transport protocol characteristics
Systèmes des cartes d'identification - Carte Européenne du Identifikationskartensysteme - Europäische Bürgerkarte -
Citoyen - Partie 1: Caractéristiques physiques, électriques Teil 1: Physikalische, elektrische und
et protocoles de transmission transportprotokollbezogene Merkmale
This Technical Specification (CEN/TS) was approved by CEN on 17 July 2006 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 15480-1:2007: E
worldwide for CEN national Members.
Contents Page
Foreword.3
Introduction .4
1 Scope.5
2 Normative references.5
3 Terms and definitions .6
4 Symbols and abbreviations .12
5 Definition, use and functions of the European Citizen Card (ECC) .13
5.1 General .13
5.2 Compliance with public administration requirements and citizen expectations.14
5.3 Citizen privacy protection.14
5.4 Identifying a ECC holder.14
5.5 European Citizen Cards functions .15
6 ECC physical characteristics.15
6.1 General .15
6.2 Materials .16
6.3 ECC physical security elements.16
6.4 ECC security evaluation .18
7 Electrical characteristics .18
7.1 Dimensions and location of the contacts or coupling area .18
7.2 The contact interface .18
7.3 Contactless interface .18
8 Transport protocols .18
9 Terminal characteristics .19
Annex A (informative) General card design (with reference to Directive 96/47/EC relating to
European driving licences).20
Annex B (informative) Methodology for the design of ECC durability testing.23
B.1 General .23
B.2 Introduction .23
B.3 Vocabulary.24
B.4 Methodology for ECC durability .24
B.5 Core test sequence requirements .29
B.6 Individual tests relevant for the ECC.30
B.7 Examples of mission profile calculations for the ECC.35
Annex C (informative) Security requirements for the ECC as a travel document (Council Regulation
on e-passports and travel documents) .39
C.1 Material .39
C.2 Biographical data page .39
C.3 Printing techniques.40
C.4 Protection against copying.40
C.5 Issuing technique.41
Bibliography.42
Foreword
This document (CEN/TS 15480-1:2007) has been prepared by Technical Committee CEN/TC 224 “Personal
identification, electronic signature and cards and their related systems and operations”, the secretariat of which is
held by AFNOR.
CEN/TS 15480, Identification card systems — European Citizen Card consists of the following parts:
Part 1: Physical, electrical and transport protocol characteristics
Part 2: Logical data structures and card services
Part 3: ECC interoperability using an application interface
Part 4: Recommendations for ECC issuance, operation and use
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this CEN Technical Specification: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.
Introduction
This Technical Specification describes the specifications for the European Citizen Card (ECC) including electronic
identity cards, with smart card format, defining identity justification with emphasis on remote civil service
procedures.
This proposal is intended to comply with the scope of the NWI ECC as defined by the terms of reference
document approved by the CEN/TC 224 Resolution 667/2004.
This Technical Specification is one of a set of documents describing card specifications. It defines identity
justification functions, with emphasis on remote public service procedures requiring the generation and/or
verification by the ECC card of electronic signatures and electronic certificates.
1 Scope
This Technical Specification specifies Electronic Citizen Card (ECC) requirements .The ECC, is a smart card
issued under the authority of a government institution, either national or local and carries credentials in order to
provide all or part of the following services:
1) verify the identity;
2) act as an Inter-European Union travel document;
3) facilitate logical access to e-government or local administration services.
A public administration authority may entitle a private organisation to provide all or part of the ECC services.
This Technical Specification is intended to offer the card issuer with a great deal of flexibility for the ECC
specification, in connection with the services that the ECC provides, the authentication mechanisms supported
and the national specific public policy with an special concern to protect the citizen privacy according to the
applicable European legislation.
The requirements described in this Technical Specification are used to:
a) define a plastic body card with associated physical and logical securities;
b) specify the electrical interface and data transport protocols for the ECC;
c) support the basic set of Identification and, authentication elements visible at the card surface.
This Technical Specification also contains a possible methodology for ECC durability testing in informative Annex
B.
This Technical Specification refers to the European legislation and regulations in effect.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references,
only the edition cited applies. For undated references, the latest edition of the referenced document (including any
amendments) applies.
ISO/IEC 7810, Identification cards — Physical characteristics
ISO/IEC 7816-1, Identification cards — Integrated circuit(s) card(s) with contacts — Part 1: Physical
characteristics
ISO/IEC 7816-2, Identification cards — Integrated circuit cards — Part 2: Cards with contacts — Dimensions and
location of the contacts
ISO/IEC 7816-3, Identification cards -- Integrated circuit cards -- Part 3: Cards with contacts -- Electrical interface
and transmission protocols
ISO/IEC 7816-4, Identification cards — Integrated circuit(s) cards — Part 4: Organization, security and commands
for interchange
ISO/IEC 7816-5, Identification cards — Integrated circuit cards — Part 5: Registration of application identifiers
ISO/IEC 7816-6, Identification cards — Integrated circuit cards — Part 6: Interindustry data elements for
interchange
ISO/IEC 7816-7, Identification cards — Integrated circuit(s) cards with contacts — Part 7: Interindustry commands
for Structured Card Query Language (SCQL)
ISO/IEC 7816-8, Identification cards — Integrated circuit cards — Part 8: Commands for security operations
ISO/IEC 7816-9, Identification cards — Integrated circuit cards — Part 9: Commands for card management
ISO/IEC 7816-10, Identification cards — Integrated circuit(s) cards with contacts — Part 10: Electronic signals
and answer to reset for synchronous cards
ISO/IEC 7816-11, Identification cards — Integrated circuit cards — Part 11: Personal verification through
biometric methods
ISO/IEC 7816-12, Identification cards — Integrated circuit cards — Part 12: Cards with contact — USB electrical
interface and operating procedures
ISO/IEC 7816-15, Identification cards — Integrated circuit cards — Part 15: Cryptographic information application
ISO/IEC 10373-3, Identification cards — Test methods — Part 3: Integrated circuit(s) cards with contacts and
related interface devices
ISO/IEC 10373-6, Identification cards — Test methods — Part 6: Proximity cards
ISO/IEC 14443-1, Identification cards — Contactless integrated circuit(s) cards — Proximity cards — Part 1:
Physical characteristics
ISO/IEC 14443-2, Identification cards — Con
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.