EN 4098:2007
(Main)Aerospace series - Steel FE-PL1507 (40CrMoV12) - Remelted, hardened and tempered, forgings De ≤ 50 mm, 1 250 MPa ≤ Rm ≤ 1 400 MPa
Aerospace series - Steel FE-PL1507 (40CrMoV12) - Remelted, hardened and tempered, forgings De ≤ 50 mm, 1 250 MPa ≤ Rm ≤ 1 400 MPa
This standard specifies the requirements relating to:
Steel FE-PL1507 (40CrMoV12) - Remelted, hardened and tempered, forgings De 50 mm, 1 250 MPa ≤ Rm ≤ 1 400 MPa
for aerospace applications.
Luft- und Raumfahrt - Stahl FE-PL1507 (CrMoV12) - Umgeschmolzen, gehärtet und angelassen, Gesenk- und Freiformschmiedestücke De ≤ 50 mm, 1 250 MPa ≤ Rm ≤ 1 400 MPa
Diese Norm legt die Anforderungen an
Stahl FE-PL1507 (40CrMoV12) Umgeschmolzen Gehärtet und angelassen Gesenk und Freiformschmiedestücke De 50 mm 1 250 MPa Rm 1 400 MPa
für die Luft und Raumfahrt fest.
Série aérospatiale - Acier FE-PL1507 (40CrMoV12) - Refondu, durci par trempe et revenu, pièces forgées et pièces matricées De ≤ 50 mm, 1 250 MPa ≤ Rm ≤ 1 400 MPa
Aeronavtika - Jeklo FE-PL1507 (40CrMoV12) - Pretaljeni, utrjeni in mehko žarjeni izkovki De <= 50 mm, 1 250 MPa <= Rm <= 1 400 MPa
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 4098:2007
01-november-2007
Aeronavtika - Jeklo FE-PL1507 (40CrMoV12) - Pretaljeni, utrjeni in mehko žarjeni
izkovki De <= 50 mm, 1 250 MPa <= Rm <= 1 400 MPa
Aerospace series - Steel FE-PL1507 (40CrMoV12) - Remelted, hardened and tempered,
forgings De <= 50 mm, 1 250 MPa <= Rm <= 1 400 MPa
Luft- und Raumfahrt - Stahl FE-PL1507 (40CrMoV12) - Umgeschmolzen, gehärtet und
angelassen, Gesenk- und Freiformschmiedestücke De <= 50 mm, 1 250 MPa <= Rm <=
1 400 MPa
Série aérospatiale - Acier FE-PL1507 (40CrMoV12) - Refondu, durci par trempe et
revenu, pieces forgées et pieces matricées De <= 50 mm, 1 250 MPa <= Rm <= 1 400
MPa
Ta slovenski standard je istoveten z: EN 4098:2007
ICS:
49.025.10 Jekla Steels
SIST EN 4098:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN 4098
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2007
ICS 49.025.10
English Version
Aerospace series - Steel FE-PL1507 (40CrMoV12) - Remelted,
hardened and tempered, forgings De ≤ 50 mm, 1 250 MPa ≤ Rm
≤ 1 400 MPa
Série aérospatiale - Acier FE-PL1507 (40CrMoV12) - Luft- und Raumfahrt - Stahl FE-PL1507 (40CrMoV12) -
Refondu, durci par trempe et revenu, pièces forgées et Umgeschmolzen, gehärtet und angelassen, Gesenk- und
pièces matricées De ≤ 50 mm, 1 250 MPa ≤ Rm ≤ 1 400 Freiformschmiedestücke De ≤ 50 mm, 1 250 MPa ≤ Rm ≤ 1
MPa 400 MPa
This European Standard was approved by CEN on 15 March 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4098:2007: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
EN 4098:2007 (E)
Contents Page
Foreword.3
Introduction .4
1 Scope.4
2 Normative references.4
2
---------------------- Page: 3 ----------------------
prEN 4098:2006 (E)
Foreword
This document (EN 4098:2007) has been prepared by the Aerospace and Defence Industries Association of
Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2008, and conflicting national standards shall be withdrawn
at the latest by February 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.