EN ISO 8351-2:1996
(Main)Packaging - Method of specification for sacks - Part 2: Sacks made from thermoplastic flexible film (ISO 8351-2:1994)
Packaging - Method of specification for sacks - Part 2: Sacks made from thermoplastic flexible film (ISO 8351-2:1994)
Provides a checklist for the characteristics to be specified when ordering sacks made from thermoplastic flexible films. These ordering specifications cover the decription of the sack and do not deal with quantitative performance requirements. Is primarily intended for application to the types of sacks made from thermoplastic flexible films as specified in ISO 6590-2.
Verpackung - Spezifikationsverfahren für Säcke - Teil 2: Säcke aus thermoplastischen Kunststoff-Folien (ISO 8351-2:1994)
Dieser Teil der ISO 8351 enthält eine Kontroll-Liste für die bei der Bestellung anzugebenden Kenndaten von Säcken aus Kunststoff-Folie. Diese Bestellanforderungen beschreiben den Sack, legen ihn jedoch nicht quantitativ fest. Der vorliegende Teil der ISO 8351 wird vorzugsweise auf die in ISO 6590-2 beschriebenen Formen von Säcken aus Kunststoff-Folie angewendet.
Emballages - Méthode de spécification des sacs - Partie 2: Sacs faits d'un film thermoplastique flexible (ISO 8351-2:1994)
La présente partie de l'ISO 8351 prescrit une liste de vérification des caractéristiques à spécifier lors de la commande de sacs faits d'un film thermoplastique flexible. Ces spécifications de commande couvrent la description du sac mais ne concernent pas les exigences quantitatives de performance. La présente partie de l'ISO 8351 est principalement applicable aux types de sacs faits d'un film thermoplastique flexible prescrits dans l'ISO 6590-2.
Embalaža - Metoda podrobnega opisovanja vreč - 2. del: Vreče iz termoplastične folije (ISO 8351-2:1994)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-1998
(PEDODåD0HWRGDSRGUREQHJDRSLVRYDQMDYUHþGHO 9UHþHL]WHUPRSODVWLþQH
IROLMH ,62
Packaging - Method of specification for sacks - Part 2: Sacks made from thermoplastic
flexible film (ISO 8351-2:1994)
Verpackung - Spezifikationsverfahren für Säcke - Teil 2: Säcke aus thermoplastischen
Kunststoff-Folien (ISO 8351-2:1994)
Emballages - Méthode de spécification des sacs - Partie 2: Sacs faits d'un film
thermoplastique flexible (ISO 8351-2:1994)
Ta slovenski standard je istoveten z: EN ISO 8351-2:1996
ICS:
55.080 9UHþH9UHþNH Sacks. Bags
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
INTERNATIONAL
Is0
STANDARD
8351-2
First edition
1994-07-l 5
Packaging - Method of specification for
sacks -
Part 2:
Sacks made from thermoplastic flexible film
Emballages - M&hode de sp&ification des sacs -
Partie 2: Sacs faits d ’un film thermoplastique flexible
Reference number
IS0 83512:1994(E)
IS0 8351=2:1994(E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work
of preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. IS0
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard IS0 8351-2 was prepared by Technical Committee
ISO/TC 122, Packaging, Subcommittee SC 2, Sacks.
IS0 8351 consists of the fo Ilowing pa rts, under the general title Packaging
- Method of specification for sacks:
- Part 1: Paper sacks
- Part 2: Sacks made from thermoplastic flexible film
0 IS0 1994
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
lnternational Organization for Standardization
Case Postale 56 l CH-1211 Geneve 20 l Switzerland
Printed in Switzerland
ii
IS0 8351=2:1994(E)
INTERNATIONAL STANDARD 0 IS0
Packaging - Method of specification for sacks -
Part 2:
Sacks made from thermoplastic flexible film
1 Scope 3 Method of specification
This part of IS0 8351 provides a checklist for the
3.1 General
characteristics to be specified when ordering sacks
made from thermoplastic flexible film. These ordering
When drawing up the specification of a sack made
specifications cover the description of the sack and
from thermoplastic flexible film for ordering purposes,
do not deal with quantitative performance require-
customer and manufacturer shall consider each item
ments. This part of IS0 8351 is primarily intended for
in the following lists and, where relevant, mutually
application to the types of sacks made from thermo-
agree to include them in the ordering specifications
plastic flexible film as specified in IS0 6590-2.
at an appropriate level.
The format of the ordering specification shall be
agreed upon between the customer and the manu-
facturer.
3.2 Description
3.2.1 Sack type
2 Normative references
3.2.1.1 Open-mouth
The following standards contain provisions which,
through reference in this text, constitute provisions
- heat-sealed flat;
of this part of IS0 8351. At the time of publication, the
editions indicated were valid. All standards are subject
- heat-sealed gusseted;
to revision, and parties to agreements based on this
part of IS0 8351 are encouraged to investigate the
- paste
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.