EN 2591-227:2015

Aerospace series - Elements of electrical and optical connection - Test methods - Part 227: Partial discharges test

This test European Standard defines methods to measure the partial discharge inception/extinction voltages (PDIV, PDEV) and partial discharge levels under specific temperatures and pressures on an electrical connector for aircraft use.
It shall be used together with EN 2591-100.

Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 227: Teilentladungsprüfung

Diese Europäische Prüfnorm legt Verfahren zur Messung der bei bestimmten Temperaturen und Drücken bei elektrischen Steckverbindern für die Verwendung in Luftfahrzeugen auftretenden Teilentladungseinsetz /Teil-entladungs¬aussetzspannung (PDIV, PDEV) und von Teilentladungsebenen fest.
Sie muss in Verbindung mit EN 2591 100 angewendet werden.

Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 227 : Essai de décharges partielles

La présente Norme Européenne d’essai définit les méthodes de mesure des tensions d’apparition/d’extinction des décharges partielles (PDIV, PDEV) et des niveaux de décharges partielles en températures et pressions spécifiques sur un connecteur électrique pour application aéronautique.
Elle doit être utilisée conjointement avec l’EN 2591-100.

Aeronavtika - Elementi električnih in optičnih povezav - Preskusne metode - 227. del: Preskus delne razelektritve

Ta preskusni evropski standard določa metode za merjenje preskusa napetosti pridobitve/izgube delne razelektritve (PDIV, PDEV) pri določenih temperaturah in tlakih na električnih priključkih za uporabo na letalih. Uporabljati ga je treba s standardom EN 2591-100.

General Information

• Status: Published
• Publication Date: 04-Aug-2015
• Withdrawal Date: 28-Feb-2016
• ICS: 49.060 - Aerospace electric equipment and systems
• ICS: 49.090 - On-board equipment and instruments
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 05-Aug-2015
• Completion Date: 05-Aug-2015
• Ref Project: SIST EN 2591-227:2015 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 227: Partial discharges test

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 227: TeilentladungsprüfungSérie aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 227: Essai de décharges partiellesAerospace series - Elements of electrical and optical connection - Test methods - Part 227: Partial discharges test49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 2591-227:2015SIST EN 2591-227:2015en,fr,de01-oktober-2015SIST EN 2591-227:2015SLOVENSKI
STANDARD



SIST EN 2591-227:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2591-227
August 2015 ICS 49.060; 49.090 English Version
Aerospace series - Elements of electrical and optical connection - Test methods - Part 227: Partial discharges test
Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 227 : Essai de décharges partielles
Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 227: Teilentladungsprüfung This European Standard was approved by CEN on 5 March 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2591-227:2015 ESIST EN 2591-227:2015



EN 2591-227:2015 (E) 2 Contents Page European foreword .3 Introduction .4 1 Scope .5 2 Normative references .5 3 Abbreviations and definitions .6 4 Applicability .6 5 Apparatus .6 6 Test methods .7 7 Procedure . 11 8 Pass fail criteria . 11 9 Test report . 12
SIST EN 2591-227:2015



EN 2591-227:2015 (E) 3 European foreword This document (EN 2591-227:2015) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this European Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2016, a
...