EN 2591-509:2023

Aerospace series - Elements of electrical and optical connection - Test methods - Part 509: Adhesion of coating on contacts

This document specifies methods of verifying adhesion of electrodeposited gold and gold alloy coatings on contacts.

Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 509: Haften des Kontaktschutzes

Dieses Dokument legt Verfahren zum Nachweis der Haftfestigkeit von elektrolytisch abgeschiedenen Schutzschichten aus Gold und Goldlegierungen auf Kontakten fest.

Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 509 : Adhérence du revêtement des contacts

Le présent document spécifie les méthodes de vérification de l'adhérence des dépôts électrolytiques d'or et d'alliages d'or sur les contacts des organes de connexion.

Aeronavtika - Elementi električnih in optičnih povezav - Preskusne metode - 509. del: Oprijemljivost premazov na kontaktih

Ta dokument določa metode preverjanja oprijemljivosti premazov iz elektrolitsko nanesenega zlata ali njegovih zlitin na kontaktih.

General Information

• Status: Published
• Publication Date: 12-Sep-2023
• ICS: 49.060 - Aerospace electric equipment and systems
• ICS: 49.090 - On-board equipment and instruments
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2/S 3 - Elements of Connection (Connectors, Contacts, rear accessories, crimping tools
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 13-Sep-2023
• Completion Date: 13-Sep-2023
• Ref Project: SIST EN 2591-509:2023 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 509: Adhesion of coating on contacts

Relations

• Replaces: EN 2591-509:2001 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 509: Adhesion of coating on contacts
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2023
Aeronavtika - Elementi električnih in optičnih povezav - Preskusne metode - 509.
del: Oprijemljivost premazov na kontaktih
Aerospace series - Elements of electrical and optical connection - Test methods - Part
509: Adhesion of coating on contacts
Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren -
Teil 509: Haften des Kontaktschutzes
Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais -
Partie 509 : Adhérence du revêtement des contacts
Ta slovenski standard je istoveten z: EN 2591-509:2023
ICS:
49.040 Prevleke in z njimi povezani Coatings and related
postopki, ki se uporabljajo v processes used in aerospace
letalski in vesoljski industriji industry
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 2591-509
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2023
EUROPÄISCHE NORM
ICS 49.060; 49.090 Supersedes EN 2591-509:2001
English Version
Aerospace series - Elements of electrical and optical
connection - Test methods - Part 509: Adhesion of coating
on contacts
Série aérospatiale - Organes de connexion électrique et Luft- und Raumfahrt - Elektrische und optische
optique - Méthodes d'essais - Partie 509 : Adhérence Verbindungselemente - Prüfverfahren - Teil 509:
du revêtement des contacts Haften des Kontaktschutzes
This European Standard was approved by CEN on 16 July 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2591-509:2023 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Details to be specified . 4
5 Methods .
...