EN 6059-402:2019

Aerospace Series - Electrical cables, installation - Protection sleeves - Test methods - Part 402: Bending properties

This European Standard specifies a method to determine the bending properties of protection sleeve for
electrical cable and cable bundles. It shall be used together with EN 6059-100.

Luft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschläuche - Prüfverfahren - Teil 402: Biegeeigenschaften

Diese Europäische Norm legt ein Verfahren zur Bestimmung der Biegeeigenschaften von Schutzschläuchen für elektrische Leitungen und Leitungsbündel fest. Sie ist zusammen mit EN 6059-100 anzuwenden.

Série aérospatiale - Câbles électriques, installation - Gaines de protection - Méthodes d'essais - Partie 402 : Aptitude à la flexion

Aeronavtika - Električni kabli, namestitev - Zaščitne obojke - Preskusne metode - 402. del: Upogibne lastnosti

Ta evropski standard določa metodo za določanje upogibnih lastnosti zaščitne obojke za
električni kabel in snope kablov. Uporabljati ga je treba skupaj s standardom EN 6059-100.

General Information

• Status: Published
• Publication Date: 26-Mar-2019
• Withdrawal Date: 29-Sep-2019
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2/S 8 - Installation Technologies
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 27-Mar-2019
• Completion Date: 27-Mar-2019
• Ref Project: SIST EN 6059-402:2019 - Aerospace Series - Electrical cables, installation - Protection sleeves - Test methods - Part 402: Bending properties

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 6059-402:2019
01-junij-2019
$HURQDYWLND(OHNWULþQLNDEOLQDPHVWLWHY=DãþLWQHRERMNH3UHVNXVQHPHWRGH
GHO8SRJLEQHODVWQRVWL
Aerospace Series - Electrical cables, installation - Protection sleeves - Test methods -
Part 402: Bending properties
Luft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschläuche -
Prüfverfahren - Teil 402: Biegeeigenschaften
Série aérospatiale - Câbles électriques, installation - Gaines de protection - Méthodes
d'essais - Partie 402 : Aptitude à la flexion
Ta slovenski standard je istoveten z: EN 6059-402:2019
ICS:
29.060.20 Kabli Cables
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
SIST EN 6059-402:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 6059-402:2019

---------------------- Page: 2 ----------------------

SIST EN 6059-402:2019


EN 6059-402
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2019
EUROPÄISCHE NORM
ICS 49.060
English Version

Aerospace Series - Electrical cables, installation -
Protection sleeves - Test methods - Part 402: Bending
properties
Série aérospatiale - Câbles électriques, installation - Luft- und Raumfahrt - Elektrische Leitungen,
Gaines de protection - Méthodes d'essais - Partie 402 : Installation - Schutzschläuche - Prüfverfahren - Teil
Aptitude à la flexion 402: Biegeeigenschaften
This European Standard was approved by CEN on 14 October 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 6059-402:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 6059-402:2019
EN 6059-402:2019 (E)
Contents
Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Preparation of specimens . 4
5 Apparatus. 5
6 Method . 6
7 Requirements . 6

2

---------------------- Page: 4 ----------------------

SIST EN 6059-402:2019
EN 6059-402:2019 (E)
European foreword
This document (EN 6059-402:2019) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
Thi
...