CEN/TS 15881:2009

Advanced technical ceramics - Ceramic composites - Determination of the fibre/matrix interfacial frictional shear stress at room temperature by tensile tests on mini-composites

This CEN Technical Specification specifies a method to determine the fibre-matrix bonding characteristics of
ceramic matrix composite materials at room temperature, by the measurement of the interfacial frictional
shear stress obtained by cycled tension on mini-composites.
A mini-composite is a unidirectional composite reinforced with a single tow.

Hochleistungskeramik - Keramische Verbundwerkstoffe - Bestimmung der Faser/Matrix-Grenzflächenscherspannung bei Raumtemperatur durch Zugversuche an Kleinstproben

Diese Technische Spezifikation des CEN legt für Verbundwerkstoffe mit keramischer Matrix ein Verfahren zur
Ermittlung der Kennwerte für den Verbund zwischen Faser und Matrix fest, indem bei Raumtemperatur an
Mini-Verbundwerkstoffen die Reibschubspannung (reibungsbedingte Scherspannung) an der Grenzfläche
gemessen wird, die durch zyklische Zugbeanspruchung erzeugt wird.
Ein Mini-Verbundwerkstoff ist ein Verbundwerkstoff mit einer unidirektionalen Verstärkung durch ein einziges
Faserbündel.

Céramiques techniques avancées - Céramiques composites - Détermination de la contrainte de frottement en cisaillement à l'interface fibre/matrice à température ambiante - Essais de traction sur minicomposites

La présente Spécification technique du CEN spécifie une méthode de détermination des caractéristiques de cohésion fibre/matrice des matériaux composites à matrice céramique, à température ambiante, en mesurant la contrainte de cisaillement à l’interface fibre/matrice due à des cycles de traction sur mini-composites. Un mini-composite est un composite unidirectionnel renforcé d’un seul fil.

Sodobna tehnična keramika - Keramični kompoziti - Ugotavljanje strižne sile vlakna/matrice pri sobni temperaturi z nateznimi preskusi mini kompozitov

General Information

• Status: Published
• Publication Date: 26-May-2009
• ICS: 81.060.30 - Advanced ceramics
• Technical Committee: CEN/TC 184 - Advanced technical ceramics
• Drafting Committee: CEN/TC 184/SC 1 - Ceramic composites
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 10-Oct-2013
• Completion Date: 10-Oct-2013
• Ref Project: SIST-TS CEN/TS 15881:2009 - Advanced technical ceramics - Ceramic composites - Determination of the fibre/matrix interfacial frictional shear stress at room temperature by tensile tests on mini-composites

Standards Content (Sample)

SLOVENSKI STANDARD
kSIST-TS prCEN/TS 15881:2009
01-januar-2009
6RGREQDWHKQLþQDNHUDPLND.HUDPLþQLNRPSR]LWL8JRWDYOMDQMHVWULåQHVLOH
YODNQDPDWULFHSULVREQLWHPSHUDWXUL]QDWH]QLPLSUHVNXVLPLQLNRPSR]LWRY
Advanced technical ceramics - Ceramic composites - Determination of the fibre/matrix
interfacial frictional shear stress at room temperature by tensile tests on mini-composites
Céramiques techniques avancées - Céramiques composites - Détermination de la
contrainte de frottement en cisaillement à l'interface fibre/matrice à température
ambiante - Essais de traction sur minicomposites
Ta slovenski standard je istoveten z: prCEN/TS 15881
ICS:
81.060.30 Sodobna keramika Advanced ceramics
kSIST-TS prCEN/TS 15881:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

kSIST-TS prCEN/TS 15881:2009

---------------------- Page: 2 ----------------------

kSIST-TS prCEN/TS 15881:2009
TECHNICAL SPECIFICATION
FINAL DRAFT
prCEN/TS 15881
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
November 2008
ICS 81.060.30

English Version
Advanced technical ceramics - Ceramic composites -
Determination of the fibre/matrix interfacial frictional shear stress
at room temperature by tensile tests on mini-composites
Céramiques techniques avancées - Céramiques
composites - Détermination de la contrainte de frottement
en cisaillement à l'interface fibre/matrice à température
ambiante - Essais de traction sur minicomposites
This draft Technical Specification is submitted to CEN members for formal vote. It has been drawn up by the Technical Committee CEN/TC
184.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a Technical Specification. It is distributed for review and comments. It is subject to change without notice
and shall not be referred to as a Technical Specification.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. prCEN/TS 15881:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

kSIST-TS prCEN/TS 15881:2009
prCEN/TS 15881:2008 (E)
Contents Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms, definitions and symbols.4
4 Principle.6
4.1 Method A.6
4.2 Method B.7
5 Significance and use .8
6 Apparatus .9
6.1 Test machine.9
6.2 Load train.9
6.3 Data recording system .9
7 Test specimens.9
8 Test specimen preparation.9
8.1 General.
...

SLOVENSKI STANDARD
SIST-TS CEN/TS 15881:2009
01-september-2009
6RGREQDWHKQLþQDNHUDPLND.HUDPLþQLNRPSR]LWL8JRWDYOMDQMHVWULåQHVLOH
YODNQDPDWULFHSULVREQLWHPSHUDWXUL]QDWH]QLPLSUHVNXVLPLQLNRPSR]LWRY
Advanced technical ceramics - Ceramic composites - Determination of the fibre/matrix
interfacial frictional shear stress at room temperature by tensile tests on mini-composites
Hochleistungskeramik - Keramische Verbundwerkstoffe - Bestimmung der
Reibschubspannung an der Grenzfläche Faser/Matrix bei Raumtemperatur mit Hilfe von
Zugversuchen an Mini-Verbundwerkstoffen
Céramiques techniques avancées - Céramiques composites - Détermination de la
contrainte de frottement en cisaillement à l'interface fibre/matrice à température
ambiante - Essais de traction sur minicomposites
Ta slovenski standard je istoveten z: CEN/TS 15881:2009
ICS:
81.060.30 Sodobna keramika Advanced ceramics
SIST-TS CEN/TS 15881:2009 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN/TS 15881:2009

---------------------- Page: 2 ----------------------

SIST-TS CEN/TS 15881:2009
TECHNICAL SPECIFICATION
CEN/TS 15881
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
May 2009
ICS 81.060.30
English Version
Advanced technical ceramics - Ceramic composites -
Determination of the fibre/matrix interfacial frictional shear stress
at room temperature by tensile tests on mini-composites
Céramiques techniques avancées - Céramiques Hochleistungskeramik - Keramische Verbundwerkstoffe -
composites - Détermination de la contrainte de frottement Bestimmung der Reibschubspannung an der Grenzfläche
en cisaillement à l'interface fibre/matrice à température Faser/Matrix bei Raumtemperatur mit Hilfe von
ambiante - Essais de traction sur minicomposites Zugversuchen an Mini-Verbundwerkstoffen
This Technical Specification (CEN/TS) was approved by CEN on 28 March 2009 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 15881:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TS CEN/TS 15881:2009
CEN/TS 15881:2009 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms, definitions and symbols .4
4 Principle .6
4.1 Method A .6
4.2 Method B .7
5 Significance and use .7
6 Apparatus .8
6.1 Test machine .8
6.2 Load train .
...