EN ISO 11876:2010

Hardmetals - Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders - Flame atomic absorption spectrometric method (ISO 11876:2010)

ISO 11876:2010 specifies a flame atomic absorption spectrometric method to be used for the determination of the mass fractions of copper, potassium, magnesium, manganese, sodium and zinc in cobalt metal powders in the range of 0,001 % to 0,01 %, calcium in the range of 0,002 % to 0,01 %, and iron and nickel in the range of 0,002 % to 0,05 %.

Hartmetalle - Bestimmung des Calcium-, Kupfer-, Eisen-, Kalium-, Magnesium-, Mangan-, Natrium-, Nickel- und Zinkgehaltes in Kobalt-Metallpulvern - Verfahren mit Flammen-Atomabsorptionsspektrometrie (ISO 11876:2010)

Diese Internationale Norm legt ein Verfahren mit Flammen-Atomabsorbtionsspektrometrie zur Bestimmung
der Massenanteile von Kupfer-, Kalium-, Magnesium-, Mangan-, Natrium- und Zinkgehaltes in Kobalt-
Metallpulvern im Bereich von 0,001 % bis 0,01 %, des Calciumgehaltes im Bereich von 0,002 % bis 0,01 %
und des Eisen- und Nickelgehaltes im Bereich von 0,002 % bis 0,05 % fest.

Métaux-durs - Dosage du calcium, du cuivre, du fer, du potassium, du magnésium, du manganèse, du sodium, du nickel et du zinc dans les poudres métalliques de cobalt - Méthode par spectrométrie d'absorption atomique dans la flamme (ISO 11876:2010)

L'ISO 11876:2010 spécifie une méthode de dosage, dans les poudres métalliques de cobalt, des fractions massiques de cuivre, potassium, magnésium, manganèse, sodium et zinc dans une plage allant de 0,001 % à 0,01 %, de calcium dans une plage allant de 0,002 % à 0,01 %, et de fer et de nickel dans une plage allant de 0,002 % à 0,05 %.

Trdine - Določevanje kalcija, bakra, železa, kalija, magnezija, mangana, natrija, niklja in cinka v kobaltovih kovinskih praških - Plamenska atomska absorpcijska spektrometrična metoda (ISO 11876:2010)

Ta mednarodni standard določa plamensko atomsko absorpcijsko spektrometrično metodo, ki se uporablja za določevanje masnih deležev bakra, kalija, magnezija, mangana, natrija in cinka v kobaltovih kovinskih praških v razponu med 0,001 % in 0,01 %, kalcija v razponu med 0,002 % in 0,01 % ter železa in niklja v razponu med 0,002 % in 0,05 %.

General Information

• Status: Published
• Publication Date: 14-Aug-2010
• Withdrawal Date: 27-Feb-2011
• ICS: 77.160 - Powder metallurgy
• Technical Committee: CEN/SS M11 - Powder metallurgy
• Drafting Committee: CEN/SS M11 - Powder metallurgy
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 15-Aug-2010
• Completion Date: 15-Aug-2010
• Ref Project: SIST EN ISO 11876:2011 - Hardmetals - Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders - Flame atomic absorption spectrometric method (ISO 11876:2010)

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hartmetalle - Bestimmung des Calcium-, Kupfer-, Eisen-, Kalium-, Magnesium-, Mangan-, Natrium-, Nickel- und Zinkgehaltes in Kobalt-Metallpulvern - Verfahren mit Flammen-Atomabsorptionsspektrometrie (ISO 11876:2010)Métaux-durs - Dosage du calcium, du cuivre, du fer, du potassium, du magnésium, du manganèse, du sodium, du nickel et du zinc dans les poudres métalliques de cobalt - Méthode par spectrométrie d'absorption atomique dans la flamme (ISO 11876:2010)Hardmetals - Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders - Flame atomic absorption spectrometric method (ISO 11876:2010)77.160Metalurgija prahovPowder metallurgyICS:Ta slovenski standard je istoveten z:EN ISO 11876:2010SIST EN ISO 11876:2011en,fr,de01-maj-2011SIST EN ISO 11876:2011SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 11876
August 2010 ICS 77.160 English Version
Hardmetals - Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders - Flame atomic absorption spectrometric method (ISO 11876:2010)
Métaux-durs - Dosage du calcium, du cuivre, du fer, du potassium, du magnésium, du manganèse, du sodium, du nickel et du zinc dans les poudres métalliques de cobalt - Méthode par spectrométrie d'absorption atomique dans la flamme (ISO 11876:2010)
Hartmetalle - Bestimmung des Calcium-, Kupfer-, Eisen-, Kalium-, Magnesium-, Mangan-, Natrium-, Nickel- und Zinkgehaltes in Kobalt-Metallpulvern - Verfahren mit Flammen-Atomabsorptionsspektrometrie (ISO 11876:2010)This European Standard was approved by CEN on 14 August 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 11876:2010: ESIST EN ISO 11876:2011

Reference numberISO 11876:2010(E)© ISO 2010
INTERNATIONAL STANDARD ISO11876First edition2010-08-15Hardmetals — Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders — Flame atomic absorption spectrometric method Métaux-durs — Dosage du calcium, du cuivre, du fer, du potassium, du magnésium, du manganèse, du sodium, du nickel et du zinc dans les poudres métalliques de cobalt — Méthode par spectrométrie d'absorption atomique dans la flamme
ISO 11876:2010(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
©
ISO 2010 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
[e-mail] Web
www.iso.org Published in Switzerland
ii © ISO 2010 – All rights reserved
ISO 11876:2010(E) © ISO 2010 – All rights reserved iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by
...