Small craft - Bilge-pumping systems (ISO 15083:2020)

This document specifies requirements for pumping or alternative means designed to remove normal accumulations of bilge water for small craft with a length of hull, LH, as defined in ISO 8666:2016, of up to 24 m.
This document does not set requirements for bilge pumps or bilge-pumping systems designed for damage control.

Kleine Wasserfahrzeuge - Lenzeinrichtungen (ISO 15083:2020)

Dieses Dokument legt Anforderungen für das Abpumpen oder alternative Möglichkeiten zum Entfernen von üblichen Mengen von Wasser fest, das sich in der Bilge ansammelt. Es gilt für kleine Wasserfahrzeuge mit einer Rumpflänge LH bis 24 m wie in ISO 8666:2016 festgelegt.
Dieses Dokument legt keine Anforderungen für Lenzpumpen oder Lenzeinrichtungen zum Zwecke der Leckbegrenzung fest.

Petit navires - Systèmes de pompes de cale (ISO 15083:2020)

Le présent document spécifie les exigences relatives au pompage ou moyens alternatifs conçus pour évacuer les accumulations normales d'eau de cale pour les petits navires d'une longueur de coque LH, comme définie dans l'ISO 8666:2016 est inférieure ou égale à 24 m.
Ce document ne définit pas les exigences applicables aux pompes de cale ou aux systèmes de pompage de cale conçus pour contrôler les avaries de coque.

Mala plovila - Kalužni sistemi (na čolnih) (ISO 15083:2020)

Standard EN ISO 15083 določa zahteve za črpanje ali alternativne načine odstranjevanja običajnih količin nakopičene kalužne vode za mala plovila z dolžino trupa (LH) do 24 m, kot je opredeljeno v standardu ISO 8666:2016. Ta dokument ne določa zahtev za kalužne črpalke ali kalužne sisteme, namenjene za obvladovanje poškodb.

General Information

Status
Published
Publication Date
21-Apr-2020
Withdrawal Date
30-Oct-2020
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
22-Apr-2020
Completion Date
22-Apr-2020

Relations

Buy Standard

Standard
EN ISO 15083:2020
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 15083:2019
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 15083:2020
01-julij-2020
Nadomešča:
SIST EN ISO 15083:2018
Mala plovila - Kalužni sistemi (na čolnih) (ISO 15083:2020)
Small craft - Bilge-pumping systems (ISO 15083:2020)
Kleine Wasserfahrzeuge - Lenzeinrichtungen (ISO 15083:2020)
Petit navires - Systèmes de pompes de cale (ISO 15083:2020)
Ta slovenski standard je istoveten z: EN ISO 15083:2020
ICS:
47.080 Čolni Small craft
SIST EN ISO 15083:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 15083:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 15083:2020


EN ISO 15083
EUROPEAN STANDARD

NORME EUROPÉENNE

April 2020
EUROPÄISCHE NORM
ICS 47.080 Supersedes EN ISO 15083:2018
English Version

Small craft - Bilge-pumping systems (ISO 15083:2020)
Petit navires - Systèmes de pompes de cale (ISO Kleine Wasserfahrzeuge - Lenzeinrichtungen (ISO
15083:2020) 15083:2020)
This European Standard was approved by CEN on 18 March 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15083:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 15083:2020
EN ISO 15083:2020 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2013/53/EU aimed to be covered . 4

2

---------------------- Page: 4 ----------------------
SIST EN ISO 15083:2020
EN ISO 15083:2020 (E)
European foreword
This document (EN ISO 15083:2020) has been prepared by Technical Committee ISO/TC 188 "Small
craft" in collaboration with CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2020, and conflicting national standards shall
be withdrawn at the latest by October 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 15083:2018.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 15083:2020 has been approved by CEN as EN ISO 15083:2020 without any modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 15083:2020
EN ISO 15083:2020 (E)
Annex ZA
(informative)

Relationship between this European Standard and the essential
requirements of Directive 2013/53/EU aimed to be covered
This European Standard has been prep
...

SLOVENSKI STANDARD
oSIST prEN ISO 15083:2019
01-april-2019
0DODSORYLOD.DOXåQLVLVWHPL QDþROQLK  ,62',6
Small craft - Bilge-pumping systems (ISO/DIS 15083:2019)
Kleine Wasserfahrzeuge - Lenzeinrichtungen (ISO/DIS 15083:2019)
Petit navires - Systèmes de pompes de cale (ISO/DIS 15083:2019)
Ta slovenski standard je istoveten z: prEN ISO 15083
ICS:
47.080 ýROQL Small craft
oSIST prEN ISO 15083:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 15083:2019

---------------------- Page: 2 ----------------------
oSIST prEN ISO 15083:2019
DRAFT INTERNATIONAL STANDARD
ISO/DIS 15083
ISO/TC 188/SC 2 Secretariat: SIS
Voting begins on: Voting terminates on:
2019-01-31 2019-04-25
Small craft — Bilge-pumping systems
Petits navires — Systèmes de pompes de cale
ICS: 47.080
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 15083:2019(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2019

---------------------- Page: 3 ----------------------
oSIST prEN ISO 15083:2019
ISO/DIS 15083:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 15083:2019
ISO/DIS 15083:2019(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols . 3
5 Requirements . 3
5.1 Type, number and location . 3
5.1.1 General. 3
5.1.2 Open and partially decked boats with bilge compartments . 3
5.1.3 Fully decked boats . 4
5.2 Summary of requirements .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.