EN ISO 5010:2019
(Main)Earth-moving machinery - Wheeled machines - Steering requirements (ISO 5010:2019)
Earth-moving machinery - Wheeled machines - Steering requirements (ISO 5010:2019)
This document specifies steering system tests and performance criteria for evaluating the steering capability of wheeled, ride-on earth-moving machinery as defined in ISO 6165:2012. Wheeled machines include machines equipped with wheels, one or more drums or crawler wheel assemblies.
This document deals with the following significant hazards, hazardous situations or hazardous events relevant to wheeled machines, when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer:
— mechanical hazards;
— ergonomic hazards;
— hazards due to maintenance;
— hazards due to the control system;
— hazards related to travelling function.
Functional safety of the steering system is not covered in this document.
This document is not applicable to wheeled machines manufactured before the date of its publication.
Erdbaumaschinen - Maschinen auf Rädern - Lenkanlagen (ISO 5010:2019)
Dieses Dokument legt die Lenkanlagenprüfungen und Leistungskriterien zur Bewertung der Lenkbarkeit von Erdbaumaschinen auf Rädern mit aufsitzender Bedienperson entsprechend der Definition in ISO 6165:2012 fest. Zu den Maschinen auf Rädern gehören Maschinen, die mit Rädern, einer oder mehr Trommeln oder Raupen-Rad-Baugruppen ausgestattet sind.
Dieses Dokument behandelt die folgenden signifikanten Gefährdungen, Gefährdungssituationen oder Gefährdungsereignisse, die auf Maschinen auf Rädern zutreffen, wenn sie bestimmungsgemäß und unter den vernünftigerweise vom Hersteller vorhersehbaren Bedingungen des Missbrauchs verwendet werden:
— mechanische Gefährdungen;
— ergonomische Gefährdungen;
— Gefährdung aufgrund der Wartung;
— Gefährdungen aufgrund des Steuerungssystems;
— Gefährdungen im Zusammenhang mit der Fahrfunktion.
Die funktionale Sicherheit der Lenkanlage ist nicht Gegenstand dieses Dokuments.
Dieses Dokument gilt nicht für Maschinen auf Rädern, die vor dem Veröffentlichungsdatum dieses Dokuments hergestellt wurden.
Engins de terrassement - Engins équipés de pneumatiques - Systèmes de direction (ISO 5010:2019)
Le présent document spécifie les essais et les critères de performance pour l'évaluation de la capacité de direction des engins de terrassement à conducteur porté et équipés de pneumatiques, tels que définis dans l'ISO 6165:2012. Les engins équipés de pneumatiques comprennent les machines équipées de roues, d'un ou de plusieurs tambours ou ensembles de chenillettes.
Le présent document traite des phénomènes dangereux, situations dangereuses ou événements dangereux significatifs suivants, relatifs aux engins équipés de pneumatiques lorsqu'ils sont utilisés comme prévu ou dans des conditions de mauvais usage raisonnablement prévisible par le fabricant:
— phénomènes dangereux mécaniques;
— phénomènes dangereux engendrés par le non-respect des principes ergonomiques;
— phénomènes dangereux dus à la maintenance;
— phénomènes dangereux dus au système de commande;
— phénomènes dangereux relatifs à la fonction de déplacement;
La sécurité fonctionnelle du système de direction n'est pas couverte dans le présent document.
Le présent document ne s'applique pas aux engins équipés de pneumatiques fabriqués avant la date de sa publication.
Stroji za zemeljska dela - Stroji s kolesi - Zahteve za krmiljenje (ISO 5010:2019)
General Information
Relations
Buy Standard
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 5010:2020
01-marec-2020
Nadomešča:
SIST EN 12643:2014
Stroji za zemeljska dela - Stroji s kolesi - Zahteve za krmiljenje (ISO 5010:2019)
Earth-moving machinery - Wheeled machines - Steering requirements (ISO 5010:2019)
Erdbaumaschinen - Bereifte Maschinen - Lenkanlagen (ISO 5010:2019)
Engins de terrassement - Engins équipés de pneumatiques - Systèmes de direction (ISO
5010:2019)
Ta slovenski standard je istoveten z: EN ISO 5010:2019
ICS:
53.100 Stroji za zemeljska dela Earth-moving machinery
SIST EN ISO 5010:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 5010:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 5010:2020
EN ISO 5010
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2019
EUROPÄISCHE NORM
ICS 53.100 Supersedes EN 12643:2014
English Version
Earth-moving machinery - Wheeled machines - Steering
requirements (ISO 5010:2019)
Engins de terrassement - Engins équipés de Erdbaumaschinen - Bereifte Maschinen - Lenkanlagen
pneumatiques - Systèmes de direction (ISO 5010:2019) (ISO 5010:2019)
This European Standard was approved by CEN on 17 November 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5010:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 5010:2020
EN ISO 5010:2019 (E)
Contents Page
European foreword . 3
Annex ZA (Informative) Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC machinery, and amending
Directive 95/16/EC (recast) [2006 L157] aimed to be covered. 4
2
---------------------- Page: 4 ----------------------
SIST EN ISO 5010:2020
EN ISO 5010:2019 (E)
European foreword
This document (EN ISO 5010:2019) has been prepared by Technical Committee ISO/TC 127 "Earth-
moving machinery" in collaboration with Technical Committee CEN/TC 151 “Construction equipment
and building material machines - Safety” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2020, and conflicting national standards shall be
withdrawn at the latest by June 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 12643:2014.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of
...
SLOVENSKI STANDARD
SIST EN ISO 5010:2020
01-marec-2020
Nadomešča:
SIST EN 12643:2014
Stroji za zemeljska dela - Stroji s kolesi - Zahteve za krmiljenje (ISO 5010:2019)
Earth-moving machinery - Wheeled machines - Steering requirements (ISO 5010:2019)
Erdbaumaschinen - Bereifte Maschinen - Lenkanlagen (ISO 5010:2019)
Engins de terrassement - Engins équipés de pneumatiques - Systèmes de direction (ISO
5010:2019)
Ta slovenski standard je istoveten z: EN ISO 5010:2019
ICS:
53.100 Stroji za zemeljska dela Earth-moving machinery
SIST EN ISO 5010:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 5010:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 5010:2020
EN ISO 5010
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2019
EUROPÄISCHE NORM
ICS 53.100 Supersedes EN 12643:2014
English Version
Earth-moving machinery - Wheeled machines - Steering
requirements (ISO 5010:2019)
Engins de terrassement - Engins équipés de Erdbaumaschinen - Bereifte Maschinen - Lenkanlagen
pneumatiques - Systèmes de direction (ISO 5010:2019) (ISO 5010:2019)
This European Standard was approved by CEN on 17 November 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5010:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 5010:2020
EN ISO 5010:2019 (E)
Contents Page
European foreword . 3
Annex ZA (Informative) Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC machinery, and amending
Directive 95/16/EC (recast) [2006 L157] aimed to be covered. 4
2
---------------------- Page: 4 ----------------------
SIST EN ISO 5010:2020
EN ISO 5010:2019 (E)
European foreword
This document (EN ISO 5010:2019) has been prepared by Technical Committee ISO/TC 127 "Earth-
moving machinery" in collaboration with Technical Committee CEN/TC 151 “Construction equipment
and building material machines - Safety” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2020, and conflicting national standards shall be
withdrawn at the latest by June 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 12643:2014.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of
...
SLOVENSKI STANDARD
SIST EN ISO 5010:2020
01-marec-2019
Nadomešča:
SIST EN 12643:2014
Stroji za zemeljska dela - Stroji s kolesi - Zahteve za krmiljenje (ISO 5010:2019)
Earth-moving machinery - Wheeled machines - Steering requirements (ISO 5010:2019)
Erdbaumaschinen - Bereifte Maschinen - Lenkanlagen (ISO 5010:2019)
Engins de terrassement - Engins équipés de pneumatiques - Systèmes de direction (ISO
5010:2019)
Ta slovenski standard je istoveten z: EN ISO 5010:2019
ICS:
53.100 Stroji za zemeljska dela Earth-moving machinery
SIST EN ISO 5010:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 5010:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 5010:2020
EN ISO 5010
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2019
EUROPÄISCHE NORM
ICS 53.100 Supersedes EN 12643:2014
English Version
Earth-moving machinery - Wheeled machines - Steering
requirements (ISO 5010:2019)
Engins de terrassement - Engins équipés de Erdbaumaschinen - Bereifte Maschinen - Lenkanlagen
pneumatiques - Systèmes de direction (ISO 5010:2019) (ISO 5010:2019)
This European Standard was approved by CEN on 17 November 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5010:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 5010:2020
EN ISO 5010:2019 (E)
Contents Page
European foreword . 3
Annex ZA (Informative) Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC machinery, and amending
Directive 95/16/EC (recast) [2006 L157] aimed to be covered. 4
2
---------------------- Page: 4 ----------------------
SIST EN ISO 5010:2020
EN ISO 5010:2019 (E)
European foreword
This document (EN ISO 5010:2019) has been prepared by Technical Committee ISO/TC 127 "Earth-
moving machinery" in collaboration with Technical Committee CEN/TC 151 “Construction equipment
and building material machines - Safety” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2020, and conflicting national standards shall be
withdrawn at the latest by June 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 12643:2014.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.