EN ISO 3164:2013/A1:2024
(Amendment)Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume - Amendment 1 (ISO 3164:2013/Amd 1:2024)
Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume - Amendment 1 (ISO 3164:2013/Amd 1:2024)
2021-01-12 TC provided the Annex ZA. CCMC requested the Enquriy assessment.
2021-01-11 JF: CCMC requested the CEN/TC to provide the Annex ZA which is needed in order to request an Enquiry assessment.
Erdbaumaschinen - Prüfung von Schutzaufbauten - Verformungsgrenzbereich - Änderung 1 (ISO 3164:2013/Amd 1:2024)
No scope available
Engins de terrassement - Étude en laboratoire des structures de protection - Spécifications pour le volume limite de déformation - Amendement 1 (ISO 3164:2013/Amd 1:2024)
Stroji za zemeljska dela - Laboratorijsko ovrednotenje zaščite - Mejno področje deformacije - Dopolnilo A1 (ISO 3164:2013/Amd 1:2024)
General Information
- Status
- Published
- Publication Date
- 16-Apr-2024
- Withdrawal Date
- 15-Aug-2022
- Technical Committee
- CEN/TC 151 - Construction equipment and building material machines - Safety
- Drafting Committee
- CEN/TC 151/WG 1 - Earth-moving machinery - Safety
- Current Stage
- 6060 - Definitive text made available (DAV) - Publishing
- Start Date
- 17-Apr-2024
- Completion Date
- 17-Apr-2024
Relations
- Effective Date
- 22-Jul-2020
Overview
EN ISO 3164:2013/A1:2024 (CEN endorsement of ISO 3164:2013/Amd 1:2024) is an amendment to the international standard for earth-moving machinery that defines laboratory evaluation methods for protective structures using the concept of the deflection-limiting volume (DLV). Published April/July 2024 and adopted by CEN members, this amendment clarifies DLV construction and testing allowances and provides an informative Annex ZA linking the standard to the EU Machinery Directive (2006/42/EC).
Key topics and technical requirements
- Deflection-limiting volume (DLV): specifies the space envelope used in laboratory tests to evaluate deformation of protective structures under load.
- DLV rotation allowance: the amendment permits the upper portion of the DLV to be rotated laterally, longitudinally, or both about the SIP (safety impact point) up to 16°; the portion below the SIP remains fixed.
- Integration with ROPS/TOPS testing: DLV rotation during ROPS (roll-over protective structure) and TOPS (tip-over protection structure) testing is allowed provided it complies with the applicable ROPS/TOPS test standards (e.g., ISO 3471, ISO 12117, ISO 12117-2, ISO 13459).
- Document updates: Table 1 from the earlier edition is deleted in this amendment; a new bibliography lists related ISO standards relevant to protective-structure testing.
- Regulatory relationship: Annex ZA explains how compliance with normative clauses of this standard confers a presumption of conformity with essential requirements of Directive 2006/42/EC where cited in the Official Journal of the EU.
Practical applications and users
Who benefits:
- Manufacturers and OEMs of excavators, loaders and other earth-moving machinery designing ROPS/TOPS and operator protection systems.
- Test laboratories and certification bodies performing laboratory evaluations and conformity assessments against DLV criteria.
- Design and safety engineers responsible for verification of protective-structure deformation limits and crashworthiness.
- Regulatory authorities and compliance teams assessing machinery conformity with the Machinery Directive.
Typical uses:
- Defining test fixtures and DLV geometry for laboratory simulation of protective-structure deformation.
- Ensuring ROPS/TOPS test set-ups account for allowed DLV rotation during impact and static tests.
- Demonstrating conformity to EU machinery safety requirements when the standard is cited.
Related standards
- ISO 3164:2013 (base standard)
- ISO 3471 - ROPS laboratory tests and performance requirements
- ISO 12117 / ISO 12117-2 - TOPS and ROPS for excavators
- ISO 13459 - Trainer seat and DLV requirements
- Directive 2006/42/EC (Machinery Directive)
Keywords: EN ISO 3164:2013/A1:2024, deflection-limiting volume, earth-moving machinery, protective structures, ROPS, TOPS, laboratory evaluations, machinery safety, EU Machinery Directive.
Frequently Asked Questions
EN ISO 3164:2013/A1:2024 is a amendment published by the European Committee for Standardization (CEN). Its full title is "Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume - Amendment 1 (ISO 3164:2013/Amd 1:2024)". This standard covers: 2021-01-12 TC provided the Annex ZA. CCMC requested the Enquriy assessment. 2021-01-11 JF: CCMC requested the CEN/TC to provide the Annex ZA which is needed in order to request an Enquiry assessment.
2021-01-12 TC provided the Annex ZA. CCMC requested the Enquriy assessment. 2021-01-11 JF: CCMC requested the CEN/TC to provide the Annex ZA which is needed in order to request an Enquiry assessment.
EN ISO 3164:2013/A1:2024 is classified under the following ICS (International Classification for Standards) categories: 53.100 - Earth-moving machinery. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 3164:2013/A1:2024 has the following relationships with other standards: It is inter standard links to EN ISO 3164:2013. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 3164:2013/A1:2024 is associated with the following European legislation: EU Directives/Regulations: 2006/42/EC; Standardization Mandates: M/396. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN ISO 3164:2013/A1:2024 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2024
Stroji za zemeljska dela - Laboratorijsko ovrednotenje zaščite - Mejno področje
deformacije - Dopolnilo A1 (ISO 3164:2013/Amd 1:2024)
Earth-moving machinery - Laboratory evaluations of protective structures - Specifications
for deflection-limiting volume - Amendment 1 (ISO 3164:2013/Amd 1:2024)
Erdbaumaschinen - Prüfung von Schutzaufbauten - Verformungsgrenzbereich -
Änderung 1 (ISO 3164:2013/Amd 1:2024)
Engins de terrassement - Étude en laboratoire des structures de protection -
Spécifications pour le volume limite de déformation - Amendement 1 (ISO
3164:2013/Amd 1:2024)
Ta slovenski standard je istoveten z: EN ISO 3164:2013/A1:2024
ICS:
53.100 Stroji za zemeljska dela Earth-moving machinery
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 3164:2013/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2024
EUROPÄISCHE NORM
ICS 53.100
English Version
Earth-moving machinery - Laboratory evaluations of
protective structures - Specifications for deflection-
limiting volume - Amendment 1 (ISO 3164:2013/Amd
1:2024)
Engins de terrassement - Étude en laboratoire des Erdbaumaschinen - Prüfung von Schutzaufbauten -
structures de protection - Spécifications pour le Verformungsgrenzbereich - Änderung 1 (ISO
volume limite de déformation - Amendement 1 (ISO 3164:2013/Amd 1:2024)
3164:2013/Amd 1:2024)
This amendment A1 modifies the European Standard EN ISO 3164:2013; it was approved by CEN on 8 December 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3164:2013/A1:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive2006/42/EC aimed to be covered . 4
European foreword
This document (EN ISO 3164:2013/A1:2024) has been prepared by Technical Committee ISO/TC 127
"Earth-moving machinery" in collaboration with Technical Committee CEN/TC 151 “Construction
equipment and building material machines - Safety” the secretariat of which is held by DIN.
This Amendment to the European Standard EN ISO 3164:2013 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by October 2024,
and conflicting national standards shall be withdrawn at the latest by October 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
For the relationship with EU Legislation, see informative Annex ZA, which is an integral part of this
document.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 3164:2013/Amd 1:2024 has been approved by CEN as EN ISO 3164:2013/A1:2024
without any modification.
Annex ZA
(informative)
Relationship between this European Standard and the essential
requirements of Directive2006/42/EC aimed to be covered
This European Standard has been prepared under a Commission’s standardization request “M/396
Mandate to CEN and CENELEC for Standardisation in the field of machinery" to provide one voluntary
means of conforming to essential requirements of Directive 2006/42/EC of the European Parliament
and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast).
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of
the scope of this standard, a presumption of conformity with the corresponding essential requirem
...
SLOVENSKI STANDARD
SIST EN ISO 3164:2013/A1:2024
01-julij-2024
Stroji za zemeljska dela - Laboratorijsko ovrednotenje zaščite - Mejno področje
deformacije - Dopolnilo A1 (ISO 3164:2013/Amd 1:2024)
Earth-moving machinery - Laboratory evaluations of protective structures - Specifications
for deflection-limiting volume - Amendment 1 (ISO 3164:2013/Amd 1:2024)
Erdbaumaschinen - Prüfung von Schutzaufbauten - Verformungsgrenzbereich -
Änderung 1 (ISO 3164:2013/Amd 1:2024)
Engins de terrassement - Étude en laboratoire des structures de protection -
Spécifications pour le volume limite de déformation - Amendement 1 (ISO
3164:2013/Amd 1:2024)
Ta slovenski standard je istoveten z: EN ISO 3164:2013/A1:2024
ICS:
53.100 Stroji za zemeljska dela Earth-moving machinery
SIST EN ISO 3164:2013/A1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
SIST EN ISO 3164:2013/A1:2024
SIST EN ISO 3164:2013/A1:2024
EN ISO 3164:2013/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2024
EUROPÄISCHE NORM
ICS 53.100
English Version
Earth-moving machinery - Laboratory evaluations of
protective structures - Specifications for deflection-
limiting volume - Amendment 1 (ISO 3164:2013/Amd
1:2024)
Engins de terrassement - Étude en laboratoire des Erdbaumaschinen - Prüfung von Schutzaufbauten -
structures de protection - Spécifications pour le Verformungsgrenzbereich - Änderung 1 (ISO
volume limite de déformation - Amendement 1 (ISO 3164:2013/Amd 1:2024)
3164:2013/Amd 1:2024)
This amendment A1 modifies the European Standard EN ISO 3164:2013; it was approved by CEN on 8 December 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3164:2013/A1:2024 E
worldwide for CEN national Members.
SIST EN ISO 3164:2013/A1:2024
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive2006/42/EC aimed to be covered . 4
SIST EN ISO 3164:2013/A1:2024
European foreword
This document (EN ISO 3164:2013/A1:2024) has been prepared by Technical Committee ISO/TC 127
"Earth-moving machinery" in collaboration with Technical Committee CEN/TC 151 “Construction
equipment and building material machines - Safety” the secretariat of which is held by DIN.
This Amendment to the European Standard EN ISO 3164:2013 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by October 2024,
and conflicting national standards shall be withdrawn at the latest by October 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
For the relationship with EU Legislation, see informative Annex ZA, which is an integral part of this
document.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 3164:2013/Amd 1:2024 has been approved by CEN as EN ISO 3164:2013/A1:2024
without any modification.
SIST EN ISO 3164:2013/A1:2024
Annex ZA
(informative)
Relationship between this European Standard and the essential
requirements of Directive2006/42/EC aimed to be covered
This European Standard has been prepared under a Commission’s standardization request “M/396
Mandate to CEN and CENELEC for Standardisation in the field of machinery" to provide one voluntary
means of conforming to essential requirements of Directive 2006/42/EC of the European Parliament
and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast).
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of
the scope of this standard, a presumption of conformity with the corresponding essential requirem
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...