EN ISO 20848-3:2018

Packaging - Plastics drums - Part 3: Plug bung closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l (ISO 20848-3:2018)

This document specifies the characteristics and dimensions of plug/bung closure systems for internally threaded openings in plastics drums of nominal capacity 113,6 l to 220 l.

Verpackung - Kunststofffässer - Teil 3: Verschlusssysteme für Kunststoff-Spundfässer mit einem Nennvolumen von 113,6 l bis 220 l (ISO 20848-3:2018)

Dieses Dokument legt die Eigenschaften und Maße von Verschlusssystemen für Öffnungen mit Innen-gewinde in Kunststoff-Spundfässern mit einem Nennvolumen von 113,6 l bis 220 l fest.

Emballages - Fûts en matière plastique - Partie 3: Systèmes de fermeture à bondes pour fûts en matière plastique d'une capacité nominale de 113,6 l à 220 l (ISO 20848-3:2018)

Le présent document spécifie les caractéristiques et les dimensions des systèmes de fermeture à bondes des ouvertures à filetage interne des fûts en matière plastique d'une capacité nominale de 113,6 l à 220 l.

Embalaža - Plastični sodi - 3. del: Sistemi zapiranja s čepom za plastične sode z nazivno prostornino od 113,6 l do 220 l (ISO 20848-3:2018)

Ta dokument določa značilnosti in dimenzije sistemov zapiranja s čepom za odprtine
z notranjim navojem pri plastičnih sodih z nazivno prostornino od 113,6 l do 220 l.

General Information

• Status: Published
• Publication Date: 18-Dec-2018
• Withdrawal Date: 29-Jun-2019
• ICS: 55.140 - Barrels. Drums. Canisters
• Technical Committee: CEN/TC 261 - Packaging
• Drafting Committee: CEN/TC 261/SC 5 - Primary packaging and transport packaging
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 19-Dec-2018
• Completion Date: 19-Dec-2018
• Ref Project: SIST EN ISO 20848-3:2019 - Packaging - Plastics drums - Part 3: Plug bung closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l (ISO 20848-3:2018)

Relations

• Replaces: EN ISO 20848-3:2008 - Packaging - Plastics drums - Part 3: Plug/bung closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l (ISO 20848-3:2006)
• Effective Date: 02-Dec-2015

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 20848-3:2019
01-marec-2019
1DGRPHãþD
SIST EN ISO 20848-3:2008
(PEDODåD3ODVWLþQLVRGLGHO6LVWHPL]DSLUDQMDVþHSRP]DSODVWLþQHVRGH]
QD]LYQRSURVWRUQLQRRGOGRO,62
Packaging - Plastics drums - Part 3: Plug bung closure systems for plastics drums with a
nominal capacity of 113,6 l to 220 l (ISO 20848-3:2018)
Verpackung - Kunststofffässer - Teil 3: Verschlusssysteme für Kunststoff-Spundfässer
mit einem Nennvolumen von 113,6 l bis 220 l (ISO 20848-3:2018)
Emballages - Fûts en matière plastique - Partie 3: Systèmes de fermeture à bondes pour
fûts en matière plastique d'une capacité nominale de 113,6 l à 220 l (ISO 20848-3:2018)
Ta slovenski standard je istoveten z: EN ISO 20848-3:2018
ICS:
55.140 6RGL.RYLQVNLVRGL5RþNH Barrels. Drums. Canisters
SIST EN ISO 20848-3:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 20848-3:2019

---------------------- Page: 2 ----------------------

SIST EN ISO 20848-3:2019


EN ISO 20848-3
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2018
EUROPÄISCHE NORM
ICS 55.140 Supersedes EN ISO 20848-3:2008
English Version

Packaging - Plastics drums - Part 3: Plug bung closure
systems for plastics drums with a nominal capacity of
113,6 l to 220 l (ISO 20848-3:2018)
Emballages - Fûts en matière plastique - Partie 3: Verpackung - Kunststofffässer - Teil 3:
Systèmes de fermeture à bondes pour fûts en matière Verschlusssysteme für Kunststoff-Spundfässer mit
plastique d'une capacité nominale de 113,6 l à 220 l einem Nennvolumen von 113,6 l bis 220 l (ISO 20848-
(ISO 20848-3:2018) 3:2018)
This European Standard was approved by CEN on 2 December 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20848-3:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 20848-3:2019
EN ISO 20848-3:2018 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 20848-3:2019
EN ISO 20848-3:2018 (E)
European foreword
This document (EN ISO 20848-3:2018) has been prepared by Technical Committee ISO/TC 122
"Packaging" in collaboration with Technical Committee CEN/TC 261 “Packaging” the secretariat of
which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2019, and conflicting national standards shall be
withdrawn at the latest by June 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 20848-3:2008.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 20848-3:2018 has been approved by
...