EN ISO 20848-2:2008
(Main)Packaging - Plastics drums - Part 2: Non-removable head (tight head) drums with a nominal capacity of 208,2 l and 220 l (ISO 20848-2:2006)
Packaging - Plastics drums - Part 2: Non-removable head (tight head) drums with a nominal capacity of 208,2 l and 220 l (ISO 20848-2:2006)
ISO 20848-2:2006 specifies the characteristics and dimensions of non-removable head (tight head) plastics drums with a nominal capacity of 208,2 l and 220 l.
Verpackung - Kunststofffässer - Teil 2: Spundfässer mit einem Nennvolumen von 208,2 l und 220 l (ISO 20848-2:2006)
Dieser Teil von ISO 20848 legt die Eigenschaften und Maße von Spundfässern aus Kunststoff mit einem
Nennvolumen von 208,2 l und 220 l fest.
Emballages - Fûts en matière plastique - Partie 2: Fûts à ouverture non amovible (ouverture partielle) d'une capacité nominale de 208,2 l et 220 l (ISO 20848-2:2006)
L'ISO 20848-2:2006 spécifie les caractéristiques et dimensions des fûts à ouverture non amovible (ouverture partielle) d'une capacité nominale de 208,2 l et 220 l.
Embalaža - Plastični sodi - 2. del: Sodi z nesnemljivim pokrovom (ozka odprtina) z nazivno prostornino 208,2 l in 220 l (ISO 20848-2:2006)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 20848-2:2008
01-oktober-2008
(PEDODåD3ODVWLþQLVRGLGHO 6RGL]QHVQHPOMLYLPSRNURYRP R]NDRGSUWLQD ]
QD]LYQRSURVWRUQLQROLQO ,62
Packaging - Plastics drums - Part 2: Non-removable head (tight head) drums with a
nominal capacity of 208,2 l and 220 l (ISO 20848-2:2006)
Verpackung - Kunststofffässer - Teil 2: Spundfässer mit einem Nennvolumen von 208,2 l
und 220 l (ISO 20848-2:2006)
Emballages - Futs en matiere plastique - Partie 2: Futs a ouverture non amovible
(ouverture partielle) d'une capacité nominale de 208,2 l et 220 l (ISO 20848-2:2006)
Ta slovenski standard je istoveten z: EN ISO 20848-2:2008
ICS:
55.140 6RGL.RYLQVNLVRGL5RþNH Barrels. Drums. Canisters
SIST EN ISO 20848-2:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 20848-2:2008
---------------------- Page: 2 ----------------------
SIST EN ISO 20848-2:2008
EUROPEAN STANDARD
EN ISO 20848-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2008
ICS 55.140
English Version
Packaging - Plastics drums - Part 2: Non-removable head (tight
head) drums with a nominal capacity of 208,2 l and 220 l (ISO
20848-2:2006)
Emballages - Fûts en matière plastique - Partie 2: Fûts à Verpackung - Kunststofffässer - Teil 2: Spundfässer mit
ouverture non amovible (ouverture partielle) d'une capacité einem Nennvolumen von 208,2 l und 220 l (ISO 20848-
nominale de 208,2 l et 220 l (ISO 20848-2:2006) 2:2006)
This European Standard was approved by CEN on 16 May 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20848-2:2008: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 20848-2:2008
EN ISO 20848-2:2008 (E)
Contents Page
Foreword.3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 20848-2:2008
EN ISO 20848-2:2008 (E)
Foreword
The text of ISO 20848-2:2006 has been prepared by Technical Committee ISO/TC 122 “Packaging” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 20848-2:2008 by
Technical Committee CEN/TC 261 “Packaging” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by December 2008, and conflicting national standards shall be withdrawn
at the latest by December 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 20848-2:2006 has been approved by CEN as a EN ISO 20848-2:2008 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 20848-2:2008
---------------------- Page: 6 ----------------------
SIST EN ISO 20848-2:2008
INTERNATIONAL ISO
STANDARD 20848-2
First edition
2006-09-15
Packaging — Plastics drums —
Part 2:
Non-remo
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.