prEN ISO 29481-2
(Main)Building information models - Information delivery manual - Part 2: Interaction framework (ISO/DIS 29481-2:2024)
Building information models - Information delivery manual - Part 2: Interaction framework (ISO/DIS 29481-2:2024)
ISO 29481-2:2012 specifies a methodology and format for describing ?coordination acts' between actors in a building construction project during all life cycle stages.
It therefore specifies
a methodology that describes an interaction framework,
an appropriate way to map responsibilities and interactions that provides a process context for information flow,
a format in which the interaction framework should be specified.
ISO 29481-2:2012 is intended to facilitate interoperability between software applications used in the construction process, to promote digital collaboration between actors in the building construction process, and to provide a basis for accurate, reliable, repeatable, and high-quality information exchange.
Bauwerksinformationsmodelle - Handbuch der Informationslieferungen - Teil 2: Interaktionsframework (ISO/DIS 29481-2:2024)
Modèles des informations de la construction - Protocole d’échange d’informations - Partie 2: Cadre d'interaction (ISO/DIS 29481-2:2024)
L'ISO 29481-2:2012 spécifie une méthodologie et un format de description des «actions de coordination» entre les acteurs d'un projet de construction à toutes les étapes du cycle de vie.
Par conséquent, elle spécifie:
- une méthodologie qui décrit un cadre d'interaction;
- une manière adaptée d'identifier les responsabilités et les interactions, qui donne un contexte aux flux d'informations du processus;
- un format dans lequel il est recommandé de spécifier le cadre d'interaction.
L'ISO 29481-2:2012 est destinée à faciliter l'interopérabilité entre les logiciels utilisés dans le processus de construction, afin de promouvoir la collaboration numérique entre les acteurs du processus de construction et de fournir une base pour un échange d'informations précis, fiable, répétable et de haute qualité.
Informacijski modeli stavb - Priročnik z informacijami - 2. del: Okvirni podatki o medsebojnem vplivanju (ISO/DIS 29481-2:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2025
Informacijski modeli stavb - Priročnik z informacijami - 2. del: Okvirni podatki o
medsebojnem vplivanju (ISO/DIS 29481-2:2024)
Building information models - Information delivery manual - Part 2: Interaction framework
(ISO/DIS 29481-2:2024)
Bauwerksinformationsmodelle - Handbuch der Informationslieferungen - Teil 2:
Interaktionsframework (ISO/DIS 29481-2:2024)
Modèles des informations de la construction - Protocole d’échange d’informations -
Partie 2: Cadre d'interaction (ISO/DIS 29481-2:2024)
Ta slovenski standard je istoveten z: prEN ISO 29481-2
ICS:
35.240.67 Uporabniške rešitve IT v IT applications in building
gradbeništvu and construction industry
91.010.01 Gradbeništvo na splošno Construction industry in
general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
International
Standard
ISO/DIS 29481-2
ISO/TC 59/SC 13
Building information models —
Secretariat: SN
Information delivery manual —
Voting begins on:
Part 2: 2024-12-16
Interaction framework
Voting terminates on:
2025-03-10
Modèles des informations de la construction — Protocole
d’échange d’informations —
Partie 2: Cadre d'interaction
ICS: 35.240.67
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 29481-2:2024(en)
DRAFT
ISO/DIS 29481-2:2024(en)
International
Standard
ISO/DIS 29481-2
ISO/TC 59/SC 13
Building information models —
Secretariat: SN
Information delivery manual —
Voting begins on:
Part 2:
Interaction framework
Voting terminates on:
Modèles des informations de la construction — Protocole
d’échange d’informations —
Partie 2: Cadre d'interaction
ICS: 35.240.67
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 29481-2:2024(en)
ii
ISO/DIS 29481-2:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
3.1 Terms defined in ISO 29481-1 .1
3.2 Other terms and definitions .3
4 Interaction Framework. 3
4.1 General .3
4.2 Information Management and the interaction framework .4
4.3 Purpose of an Interaction Framework .5
4.4 Hierarchical structure of an interaction framework .6
4.4.1 Roles .6
4.4.2 Transactions .7
4.4.3 Messages .8
4.4.4 Complex and Simple Elements.9
4.5 Establishing a Digital IDM communication Project .10
4.5.1 Modelling the interaction framework .10
4.5.2 Creating and using the interaction framework schema .11
4.5.3 Using a project specific message to link people to roles .11
4.5.4 Executing digital IDM communication . 12
4.5.5 Validating digital IDM communication . 13
4.5.6 Signing messages with advanced electronic signatures . 13
4.5.7 Changing the project during execution .14
4.5.8 Archiving digital IDM communication.14
5 Schemas for validating interaction frameworks and messages .15
5.1 Introduction . 15
5.1.1 Basic principles .16
5.1.2 Element types in the interaction framework schema and _2 EXPRESS source file .16
5.1.3 Introduction .16
5.1.4 Primary element types .18
5.1.5 Secondary element types .27
5.1.6 References . 30
5.2 Element types in the interaction message schema and the _5 EXPRESS source file .37
5.2.1 Introduction .37
5.2.2 Primary element types . 38
5.2.3 Secondary element types .43
5.2.4 References .45
Annex A (normative) Interaction framework schema definition .52
Annex B (normative) Templates definition .53
Annex C (informative) Promotor algorithm .54
Annex D (informative) Example interaction framework XML of a simplified design office use
case .55
Annex E (informative) Example project specific message XML of a simplified design office use
case .72
Annex F (informative) Example message XML of a simplified design office use case .79
Bibliography .90
iii
ISO/DIS 29481-2:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an exp
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.