EN ISO 11979-8:2015

Ophthalmic implants - Intraocular lenses - Part 8: Fundamental requirements (ISO 11979-8:2006 + Amd 1:2011)

11979-8:2006 specifies fundamental requirements for all types of intraocular lenses intended for surgical implantation into the anterior segment of the human eye, excluding corneal implants and transplants.

Ophthalmische Implantate - Intraokularlinsen - Teil 8: Grundlegende Anforderungen (ISO 11979-8:2006 + Amd 1:2011)

Dieser Teil von ISO 11979 legt grundlegende Anforderungen an Intraokularlinsen fest, die für die Implantation
in den vorderen Abschnitt des menschlichen Auges vorgesehen sind, mit Ausnahme von Implantaten und
Transplantaten für die Hornhaut.

Implants ophtalmiques - Lentilles intraoculaires - Partie 8: Exigences fondamentales (ISO 11979-8:2006 + Amd 1:2011)

L'ISO 11979-8:2006 spécifie les exigences fondamentales applicables à tous les types de lentilles intraoculaires destinées à l'implantation chirurgicale dans le segment antérieur de l'oeil humain, à l'exception des implants et transplants cornéens.

Očesni vsadki (implantati) - Intraokularne leče - 8. del: Temeljne zahteve (ISO 11979-8:2006 + Amd 1:2011)

Določa temeljne zahteve za vse vrste intraokularnih leč, namenjenih za kirurško vsaditev v sprednji segment človeškega očesa, razen roženičnih vsadkov in presadkov.

General Information

• Status: Withdrawn
• Publication Date: 27-Jan-2015
• Withdrawal Date: 09-May-2017
• ICS: 11.040.70 - Ophthalmic equipment
• Technical Committee: CEN/TC 170 - Ophthalmic optics
• Drafting Committee: CEN/TC 170 - Ophthalmic optics
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 10-May-2017
• Directive: 2007/47/EC - Directive 2007/47/EC of the European Parliament and of the council of 5 September 2007 amending Council Directive 90/385/EEC on the approximation of the laws of the Member States relating to active implantable medical devices, Council Directive 93/42/EEC concerning medical devices and Directive 98/8/EC concerning the placing of biocidal products on the market
• Directive: 93/42/EEC - Council Directive 93/42/EEC of 14 June 1993 concerning medical devices
• Mandate: M/023 - Standardization mandate to CEN/CENELEC concerning the development of European standards relating to medical devices
• Ref Project: SIST EN ISO 11979-8:2015 - Ophthalmic implants - Intraocular lenses - Part 8: Fundamental requirements (ISO 11979-8:2006 + Amd 1:2011)

Relations

• Replaces: EN ISO 11979-8:2009/A1:2011 - Ophthalmic implants - Intraocular lenses - Part 8: Fundamental requirements - Amendment 1 (ISO 11979-8:2006/Amd 1:2011)
• Effective Date: 04-Feb-2015
• Replaces: EN ISO 11979-8:2009 - Ophthalmic implants - Intraocular lenses - Part 8: Fundamental requirements (ISO 11979-8:2006)
• Effective Date: 04-Feb-2015
• Replaced By: EN ISO 11979-8:2017 - Ophthalmic implants - Intraocular lenses - Part 8: Fundamental requirements (ISO 11979-8:2017)
• Effective Date: 08-Jun-2015

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2015
1DGRPHãþD
SIST EN ISO 11979-8:2009
SIST EN ISO 11979-8:2009/A1:2011
2þHVQLYVDGNLLPSODQWDWL,QWUDRNXODUQHOHþHGHO7HPHOMQH]DKWHYH,62
$PG
Ophthalmic implants - Intraocular lenses - Part 8: Fundamental requirements (ISO 11979
-8:2006 + Amd 1:2011)
Ophthalmische Implantate - Intraokularlinsen - Teil 8: Grundlegende Anforderungen (ISO
11979-8:2006 + Amd 1:2011)
Implants ophtalmiques - Lentilles intraoculaires - Partie 8: Exigences fondamentales
(ISO 11979-8:2006 + Amd 1:2011)
Ta slovenski standard je istoveten z: EN ISO 11979-8:2015
ICS:
11.040.70 Oftalmološka oprema Ophthalmic equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 11979-8
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2015
ICS 11.040.70 Supersedes EN ISO 11979-8:2009
English Version
Ophthalmic implants - Intraocular lenses - Part 8: Fundamental
requirements (ISO 11979-8:2006 + Amd 1:2011)
Implants ophtalmiques - Lentilles intraoculaires - Partie 8: Ophthalmische Implantate - Intraokularlinsen - Teil 8:
Exigences fondamentales (ISO 11979-8:2006 + Amd Grundlegende Anforderungen (ISO 11979-8:2006 + Amd
1:2011) 1:2011)
This European Standard was approved by CEN on 7 January 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11979-8:2015 E
worldwide for CEN national Members.

Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 93/42/EEC on Medical Devices .5

Foreword
The text of ISO 11979-8:2006 + Amd 1:2011 has been prepared by Technical Committee ISO/TC 172 “Optics
and photonics” of the International Organization for Standardization (ISO) and has been taken over as EN
ISO 11979-8:2015 by Technical Committee CEN/TC 170 “Ophthalmic optics” the secretariat of which is held
by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by July 2015, and conflicting national standards shall be withdrawn at the
latest by July 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11979-8:2009.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Table – Correlations between undated normative references and dated EN and ISO standards
Normative references Equivalent dated standard
as listed in Clause 2 EN ISO
ISO 9000 EN ISO 9000:2005 ISO 9000:2005
1)
)
ISO 10993-7:1995 ISO 10993-7:1995
EN ISO 10993-7:1995
ISO 11979-1 EN ISO 11979-1:2012 ISO 11979-1:2012
ISO 11979-2 EN ISO 11979-2:2014 ISO 11979-2:2014
ISO 11979-3 EN ISO 11979-3:2012 ISO 11979-3:2012
ISO 11979-4 EN ISO 11979-4:2008 + A1:2012 ISO 11979-4:2008 + Amd.1:2012
ISO 11979-5 EN ISO 11979-5:2006 ISO 11979-5:2006
ISO 11979-6 EN ISO 11979-6:2014 ISO 11979-6:2014
ISO 11979-7 EN ISO 11979-7:2014 ISO 11979-7:2014
ISO 11979-9 EN ISO 11979-9:2006 + A1:2014 ISO 11979-9:2006 + Amd.1:2014
ISO 11979-10 EN ISO 11979-10:2006 + A1:2014 ISO 11979-10:2006 + Amd.1:2014
2)
)
ISO 14155-1:2003 ISO 14155-1:2003
EN ISO 14155-1:2009
2) 2)
ISO 14155-2 EN ISO 14155-2:2009 ISO 14155-2:2003
ISO 14630 EN ISO 14630:2012 ISO 14630:2012
ISO 14971 EN ISO 14971:2007 ISO 14971:2007
Endorsement notice
The text of ISO 11979-8:2006 + Amd 1:2011 has been approved by CEN as EN ISO 11979-8:2015 without
any modification.
1)
Withdrawn. The version available at the time of publication of the present document is EN ISO 10993-7:2008
+ AC:2009 (ISO 10993-7:2008 + Cor.1:2009).
2)
Withdrawn. The version available at the time of publication of the present document is EN ISO 14155:2011 + AC:2011
(ISO 14155:2011 + Cor.1:2011).
Annex ZA
(informative)
Relationship between this European Standard and the
Essential Requirements of EU Directive 93/42/EEC on Medical Devices
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of the
New Approach Directive 93/42/EEC on Medical Devices.
Once this standard is cited in the Official Journal of the European Union under that Directive and has been
implemented as a national standard in at least one Member State, compliance with the clauses of this
standard given in Table ZA.1 confers, within the limits of the scope of this standard, a presumption of
conformity with the corresponding Essential Requirements of that Directive and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard
and Directive 93/42/EEC on Medical Devices
Clause(s)/sub-clause(s) Essential Requirements (ERs) Qualifying remarks/Notes
of this European Standard of Directive 93/42/EEC
9 7.2 Sterility requirement.
Protection against ethylene oxide
and derivatives thereof in case the
device is sterilized by ethylene
oxide.
Protection against endotoxins.
6 7.3 For biocompatibility and interaction
with YAG-laser reference to
EN ISO 11979-5.
6, 9 7.5 Sterility requirement.
Protection against ethylene oxide
and derivatives thereof in case the
device is sterilized by ethylene
oxide.
Protection against endotoxins.
For biocompatibility and interaction
with YAG-laser reference to
EN ISO 11979-5.
6, 7 7.6 For biocompatibility and interaction
with YAG-laser reference to
EN ISO 11979-5.
For clinical investigation reference
to EN ISO 11979-7, 9 and -10, as
applicable.
Clause(s)/sub-clause(s) Essential Requirements (ERs) Qualifying remarks/Notes
of this European Standard of Directive 93/42/EEC
9 8.1 Sterility requirement.
Protection against ethylene oxide
and derivatives thereof in case the
device is sterilized by ethylene
oxide.
Protection against endotoxins.
10 8.3 For shelf-life and transport
reference to EN ISO 11979-6.
9 8.4 Sterility requirement.
Protection against ethylene oxide
and derivatives thereof in case the
device is sterilized by ethylene
oxide.
Protection against endotoxins.
10 8.6 For shelf-life and transport
reference to EN ISO 11979-6.
4, 5 9.1 For optical properties reference to
EN ISO 11979-2,
for mechanical properties
reference to EN ISO 11979-3,
for multifocal IOLs reference to
EN ISO 11979-9 and
for phakic IOLs reference to
EN ISO 11979-10.
4, 5, 6, 7, 10 9.2 For optical properties reference to
EN ISO 11979-2,
for mechanical properties
reference to EN ISO 11979-3,
for multifocal IOLs reference to
EN ISO 11979-9 and
for phakic IOLs reference to
EN ISO 11979-10.
For biocompatibility and interaction
with YAG-laser reference to
EN ISO 11979-5.
For clinical investigation reference
to EN ISO 11979-7, 9 and -10, as
applicable.
For shelf-life and transport
reference to EN ISO 11979-6.
4, 5 12.7.1 For optical properties reference to
EN ISO 11979-2,
for mechanical properties
reference to EN ISO 11979-3,
for multifocal IOLs reference to
EN ISO 11979-9 and
for phakic IOLs reference to
EN ISO 11979-10.
11, 12 13.1 For labelling and information
reference to EN ISO 11979-4.
Clause(s)/sub-clause(s) Essential Requirements (ERs) Qualifying remarks/Notes
of this European Standard of Directive 93/42/EEC
11, 12 13.2 For labelling and information
reference to EN ISO 11979-4.
11, 12 13.3 For labelling and information
reference to EN ISO 11979-4.
11, 12 13.5 For labelling and information
reference to EN ISO 11979-4.
11, 12 13.6 For labelling and information
reference to EN ISO 11979-4.
WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling within
the scope of this standard.
INTERNATIONAL ISO
STANDARD 11979-8
Second edition
2006-07-01
Ophthalmic implants — Intraocular
lenses —
Part 8:
Fundamental requirements
Implants ophtalmiques — Lentilles intraoculaires —
Partie 8: Exigences fondamentales

Reference number
ISO 11979-8:2006(E)
©
ISO 2006
ISO 11979-8:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved

ISO 11979-8:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 11979-8 was prepared by Technical Committee ISO/TC 172, Optics and photonics, Subcommittee SC 7,
Ophthalmic optics and instruments.
This second edition cancels and replaces the first edition (ISO 11979-8:1999) which has been technically
revised.
ISO 11979 consists of the following parts, under the general title Ophthalmic implants — Intraocular lenses:
⎯ Part 1: Vocabulary
⎯ Part 2: Optical properties and test methods
⎯ Part 3: Mechanical propert
...