iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 7944:2024

(Main)

Optics and photonics - Reference wavelengths (ISO 7944:2024)

Optics and photonics - Reference wavelengths (ISO 7944:2024)

This document specifies reference wavelengths to be used for the characterization of optical materials, optical systems and instruments, and ophthalmic lenses. It defines the associated principal refractive indices and principal dispersions, as well as the Abbe numbers with regard to these reference wavelengths and principal dispersions.

Optik und Photonik - Bezugswellenlängen (ISO 7944:2024)

Dieses Dokument legt Bezugswellenlängen fest, die für die Charakterisierung von optischen Werkstoffen zu verwenden sind, optischen Systemen und Instrumenten sowie ophthalmischen Linsen. Es definiert die zugehörigen Hauptbrechzahlen und die Hauptdispersionen sowie die Abbe-Zahlen bezogen auf diese Bezugswellenlängen und die Hauptdispersionen.

Optique et photonique - Longueurs d'onde de référence (ISO 7944:2024)

Le présent document définit des longueurs d'onde de référence à utiliser pour la caractérisation des matériaux optiques, des systèmes et des instruments d'optique et des verres ophtalmiques. Il définit les indices de réfraction principaux et les dispersions principales associées, ainsi que les nombres d'Abbe par rapport à ces longueurs d'onde de référence et aux dispersions principales.

Optika in fotonska tehnologija - Referenčne valovne dolžine (ISO 7944:2024)

General Information

Status
Published
Publication Date
03-Dec-2024
ICS
11.040.70 - Ophthalmic equipment
17.180.01 - Optics and optical measurements in general
Technical Committee
CEN/TC 170 - Ophthalmic optics
Drafting Committee
CEN/TC 170 - Ophthalmic optics
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
04-Dec-2024
Completion Date
04-Dec-2024
Ref Project
SIST EN ISO 7944:2025 - Optics and photonics - Reference wavelengths (ISO 7944:2024)

Relations

Replaces
EN ISO 7944:1998 - Optics and optical instruments - Reference wavelengths (ISO 7944:1998)
Effective Date
19-Jan-2023
Replaces
EN ISO 7944:1998/AC:2009 - Optics and optical instruments - Reference wavelengths (ISO 7944:1998/Cor 1:2009)
Effective Date
18-Jan-2023

Buy Standard

EN ISO 7944:2025EN ISO 7944:2025
PreviousNext
Standard
EN ISO 7944:2025
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-februar-2025
Nadomešča:
SIST EN ISO 7944:2000
SIST EN ISO 7944:2000/AC:2010
Optika in fotonska tehnologija - Referenčne valovne dolžine (ISO 7944:2024)
Optics and photonics - Reference wavelengths (ISO 7944:2024)
Optik und optische Instrumente - Bezugswellenlängen (ISO 7944:2024)
Optique et instruments d'optique - Longueurs d'onde de référence (ISO 7944:2024)
Ta slovenski standard je istoveten z: EN ISO 7944:2024
ICS:
11.040.70 Oftalmološka oprema Ophthalmic equipment
17.180.01 Optika in optična merjenja na Optics and optical
splošno measurements in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 7944
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2024
EUROPÄISCHE NORM
ICS 11.040.70; 17.180.01 Supersedes EN ISO 7944:1998
English Version
Optics and photonics - Reference wavelengths (ISO
7944:2024)
Optique et photonique - Longueurs d'onde de Optik und Photonik - Bezugswellenlängen (ISO
référence (ISO 7944:2024) 7944:2024)
This European Standard was approved by CEN on 1 December 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7944:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 7944:2024) has been prepared by Technical Committee ISO/TC 172 "Optics and
photonics" in collaboration with Technical Committee CEN/TC 170 “Ophthalmic optics” the secretariat
of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2025, and conflicting national standards shall be
withdrawn at the latest by June 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 7944:1998.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 7944:2024 has been approved by CEN as EN ISO 7944:2024 without any modification.

International
Standard
ISO 7944
Third edition
Optics and photonics — Reference
2024-11
wavelengths
Optique et photonique — Longueurs d'onde de référence
Reference number
ISO 7944:2024(en) © ISO 2024
ISO 7944:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 7944:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Reference wavelengths, principal dispersions and Abbe numbers . 1
4.1 General .1
4.2 Mercury e-line 546,075 nm .1
4.3 Helium d-line 587,562 nm .2
4.4 Wavelength tables .2
Bibliography . 4

iii
SIST EN ISO 7944:2
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 21922:2021/A1:2024(Amendment)
Refrigerating systems and heat pumps - Valves - Requirements, testing and marking - Amendment 1 (ISO 21922:2021/Amd 1:2024)
SIST EN ISO 21922:2022/A1:2025

This document specifies safety requirements, certain functional requirements, and marking of valves and other components with similar bodies, hereinafter called valves, for use in refrigerating systems including heat pumps.
This document includes requirements for valves with extension pipes.
This document describes the procedure to be followed when designing valve parts subjected to pressure as well as the criteria to be used in the selection of materials.
This document describes methods by which reduced impact values at low temperatures may be taken into account in a safe manner.
This document applies to the design of bodies and bonnets for pressure relief devices, including bursting disc devices, with respect to pressure containment but it does not apply to any other aspects of the design or application of pressure relief devices.
In addition, this document is applicable to valves with a maximum operating temperature not exceeding 200 °C and a maximum allowable pressure not exceeding 160 bar[1].
[1] 1 bar = 0,1 MPa.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13165-3:2024(Main)
Water quality - Radium-226 - Part 3: Test method using coprecipitation and gamma-ray spectrometry (ISO 13165-3:2024)
kSIST FprEN ISO 13165-3:2024

This document specifies a method to determine radium-226 (226Ra) activity concentration in all types of water by coprecipitation followed by gamma-ray spectrometry (see ISO 20042[7]).
The method covers the measurement of soluble 226Ra activity concentrations greater than 0,002 Bq·l−1 using a sample volume of up to 100 l of any water type.
For water samples with a volume of less than a volume of 1 l, direct gamma-ray spectrometry can be performed following ISO 10703 but with a higher detection limit. The typical detection limit for samples of 1 l to 5 l is in the range of 0,002 to 0,000 40 Bq·l−1[8].
NOTE            This test method can be adapted to determine other naturally occurring isotopes of radium, such as 223Ra, 224Ra and 228Ra, if the respective ingrowth periods are taken into account.

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 30-2-2:2024(Main)
Domestic cooking appliances burning gas - Part 2-2: Rational use of energy - Appliances having forced-convection ovens and/or grills
kSIST FprEN 30-2-2:2022

This document specifies the requirements and test method for the rational use of energy of gas cooking appliances having forced-convection ovens and/or grills using combustible gases described in Clause 1 of EN 30 1 2:2012.
This document covers only type testing.

  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4908:2024(Main)
Aerospace series - Hexavalent chromium free chemical conversion process of magnesium and magnesium alloys
SIST EN 4908:2025

This document specifies the requirements for the hexavalent chromium free chemical conversion process of magnesium and magnesium alloys to ensure an adhesion base before bonding and painting.
The purpose of this document is to specify design, quality and manufacturing requirements. It does not specify complete in-house process instructions; these are specified in the processors detailed process instructions.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 20957-1:2024(Main)
Stationary training equipment - Part 1: General safety requirements and test methods (ISO 20957-1:2024)
kSIST FprEN ISO 20957-1:2024

This document specifies general safety requirements and test methods for indoor stationary training equipment. Other parts of the ISO 20957 series can modify the requirements contained in this document. This document also covers environmental aspects.
It also specifies a classification system (see Clause 4).
This document is applicable to all stationary training equipment. This includes equipment for use in training areas of organizations such as sport associations, educational establishments, hotels, sport halls, clubs, rehabilitation centres and studios (classes S and I) where access and control is specifically regulated by the owner (person who has the legal responsibility), equipment for domestic use (class H) and other types of equipment including motor driven equipment as defined in 3.1.
The requirements of other parts of the ISO 20957 series take priority over the corresponding requirements of this general standard.
This document does not apply to stationary training equipment intended for outdoor use. It also does not apply to stationary training equipment intended for use by children under the age of 14 years, unless such stationary training equipment is intended for educational purposes in schools and other pedagogical contexts for children under the supervision of a qualified adult instructor.

  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11127-8:2024(Main)
Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 8: Field determination of water-soluble chlorides (ISO 11127-8:2020)
oSIST prEN ISO 11127-8:2024

This document specifies a field method for the determination of water-soluble chlorides in non-metallic blast-cleaning abrasives. This field method is provided as a kit with all components and premeasured extraction solution.
This document differs from ISO 11127-7 in that equal volumes of the sample of abrasive and extraction solution are used for the determination of chloride level in the abrasive. In comparison, ISO 11127-7 uses a weight to volume ratio of abrasive to solvent (deionized water) to extract soluble salts from the abrasive. It is intended for use in the field as compared to ISO 11127-7, which is well suited for use in the laboratory.

  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17487:2024(Main)
Protective clothing - Garments with permethrin as-treated articles supporting the protection against tick bites
kSIST FprEN 17487:2022

This document specifies requirements for garments that support the protection against tick bites. The document applies to body covering garments (at least covering the torso, arms and legs) where protection against tick bites, which is provided by garments as physical barriers, is reinforced by industrial treatment with the biocide permethrin of the fabrics, fibres or yarns prior to confection. The specified requirements focus on prevention of bites by the nymph stage of the tick Ixodes ricinus, which is the most relevant stage and species for public and occupational health in Europe.
This document specifies requirements and the tests for garments containing permethrin to provide sufficient assistance in protection against tick bites, and to be durable and safe for the user.
NOTE 1    Non-permethrin containing garments covering the torso, arms and legs and feet offer some protection against tick bites, but are insufficient under high exposure to ticks, which can crawl over the fabric to reach bare skin and bite. Garments that comply with this document and cover at least torso, arms and legs to counter ticks from crawling over the fabric to reach bare skin and bite thereby provide substantial protection.
NOTE 2    The importance of following manufacturers laundering instructions to prevent early deterioration of the effect of permethrin treatment is stressed throughout the document.

  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8502-15:2024(Main)
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 15: Extraction of soluble contaminants for analysis by acid extraction (ISO 8502-15:2020)
oSIST prEN ISO 8502-15:2024

This document specifies a method of extracting, for analysis, acid soluble contaminants from a surface by use of flexible cells in the form of adhesive patches or sleeves which can be attached to any surface, regardless of its shape (flat or curved) and its orientation (facing in any direction, including downwards).
The described method is suitable for use in the field to determine the presence of acid soluble contaminants before painting or a similar treatment.
This document does not cover the subsequent analysis of the contaminants that have been dissolved off. Methods of analysis suitable for field use are described in other parts of ISO 8502 such as ISO 8502-5.
This document is similar in procedure to, but not equal to, ISO 8502-6. The main difference is the solvent used and the subsequent analysis that can be performed on the extraction solution.

  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12209:2024(Main)
Building hardware - Mechanically operated locks and locking plates - Characteristics and test methods
SIST EN 12209:2025

This document specifies product characteristics and test methods of mechanically operated locks and their locking plates.
This document covers mechanically operated locks and their locking plates which are either manufactured and placed on the market in their entirety by one producer or assembled from sub-assemblies produced by more than one producer and designed to be used in combination.
This document does not cover assessment of the contribution of the product to the fire resistance of specific fire resistance and/or smoke control door set assemblies.
This document is not applicable to mechanically/electromechanically cylinders, handles, locks for windows, padlocks, locks for safes, furniture locks or prison locks.
This document does not specify mechanically operated multipoint locks and their locking plates which are specified by EN 15685.

  • Draft
    77 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1058:2024(Main)
Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values
SIST EN 1058:2025

On the basis of test results from wood-based panel products for structural purposes, this document specifies a method for the determination of:
-   characteristic 5-percentile values of mechanical properties under the assumption of a log-normal distribution of the test data according to EN 14358; and
-   characteristic mean values (50-percentile values) of physical properties under the assumption of a normal distribution of the test data according to EN 14358.
Test data can be determined from tests using the test methods outlined in the test standard EN 789 or other relevant test standard, performance standard or product standard normatively referring to EN 1058.
NOTE   See e.g. EN 1195 and EN 12871.
The statistical evaluation follows the principles of EN 1990:2023 , Annex D of EN 1995-1-1:2004  and of EN 14358:2016.

  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day