EN 14420-4:2004

Hose fittings with clamp units - Part 4: Flange connections

This document specifies requirements for hose tails with flanges of mating dimensions PN 10 according to EN 1092 1, on hose fittings with clamp units according to EN 14420 3.
Maximum working pressure 25 bar, maximum working temperature 65 °C.

Schlaucharmaturen mit Klemmfassungen - Teil 4: Flanschanschlüsse

Raccords pour flexibles avec demi-coquille - Partie 4: Raccordements à bride

Cevni fitingi z objemkami - 4. del: Prirobnični priključki

General Information

• Status: Withdrawn
• Publication Date: 16-Nov-2004
• Withdrawal Date: 23-Jan-2007
• ICS: 23.040.70 - Hoses and hose assemblies
• Technical Committee: CEN/TC 218 - Rubber and plastics hoses and hose assemblies
• Drafting Committee: CEN/TC 218/WG 1 - Rubber and plastics hoses and hose assemblies for industrial, chemical and petrochemical applications
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 24-Jan-2007
• Completion Date: 24-Jan-2007
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN 14420-4:2005 - Hose fittings with clamp units - Part 4: Flange connections

Relations

• Merged Into: EN 14420-4:2004+A1:2007 - Hose fittings with clamp units - Part 4: Flange connections
• Effective Date: 18-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Schlaucharmaturen mit Klemmfassungen - Teil 4: FlanschanschlüsseRaccords pour flexibles avec demi-coquille - Partie 4: Raccordements a brideHose fittings with clamp units - Part 4: Flange connections23.040.60Prirobnice, oglavki in spojni elementiFlanges, couplings and jointsICS:Ta slovenski standard je istoveten z:EN 14420-4:2004SIST EN 14420-4:2005en01-marec-2005SIST EN 14420-4:2005SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14420-4November 2004ICS 23.040.70English versionHose fittings with clamp units - Part 4: Flange connectionsRaccords pour flexibles avec demi-cognille - Partie 4:Raccordements à brideSchlaucharmaturen mit Klemmfassungen - Teil 4:FlanschanschlüsseThis European Standard was approved by CEN on 30 September 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14420-4:2004: ESIST EN 14420-4:2005

EN 14420 consists at the time of publication of the following parts: EN 14420-1, Hose fittings with clamp units — Part 1: Requirements, survey, designation and testing EN 14420-2, Hose fittings with clamp units — Part 2: Hose side parts of hose tail EN 14420-3, Hose fittings with clamp units — Part 3: Clamp units, bolted or pinned EN 14420-4, Hose fittings with clamp units — Part 4: Flange connections EN 14420-5, Hose fittings with clamp units — Part 5: Threaded connections EN 14420-6, Hose fittings with clamp units — Part 6: TW tank truck couplings EN 14420-7, Hose fittings with clamp units — Part 7: Cam locking couplings EN 14420-8, Hose fittings with clamp units — Part 8: Symmetrical half coupling (Guillemin system) According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Den-mark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxem-bourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom SIST EN 14420-4:2005

EN 288-4, Specification and approval of welding procedures for metallic materials — Part 4: Welding proce-dure tests for the arc welding of aluminium and its alloys EN 1092-1, Flanges and their joints — Circular flanges for pipes, valves, fittings and accessories, PN desig-nated — Part 1: Steel flanges EN 1289, Non-destructive examination of welds — Penetrant testing of welds — Acceptance levels EN 1290, Non-destructive examination of welds — Magnetic particle examination of welds EN 1291, Non-destructive examination of welds — Magnetic particle testing of welds — Acceptance levels EN 1435, Non-destructive examination of welds — Radiographic examination of welded joints EN 1712, Non-destructive examination of welds — Ultrasonic examination of welded joints — Acceptance levels EN 1713, Non-destructive examination of welds — Ultrasonic examination — Characterization of indications in welds EN 1714, Non-destructive examination of welds — Ultrasonic examination of welded joints EN 10025, Hot rolled products of non-alloy structural steels — Technical delivery conditions EN 10087, Free-cutting steels — Technical delivery conditions for semi-finished products, hot-rolled bars and rods EN 10088-1, Stainless steels — Part 1: List of stainless steels EN 10216-1, Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 1: Non-alloy steel tubes with specified room temperature properties EN 10217-1, Welded steel tubes for pressure purposes — Technical delivery conditions — Part 1: Non-alloy steel tubes with specified room temperature properties EN 10283, Corrosion resistant steel castings EN 14420-1, Hose fittings with clamp units — Part 1: Requirements, survey, designation and testing EN 14420-2, Hose fittings with clamp units — Part 2: Hose side parts of hose tail EN 14420-3, Hose fittings with clamp units — Part 3: Clamp units, bolted or pinned EN 22768-1, General tolerances — Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989) EN 22768-2, General tolerances — Part 2: Geometrical tolerances for features without individual tolerance indications (ISO 2768-2:1989) EN ISO 4042, Fasteners — Electroplated coatings (
...