iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 996:1995

(Main)

Piling equipment - Safety requirements

Piling equipment - Safety requirements

This standard specifies safety requirements for piling equipment suitable for the following purposes: a) construction of foundations, slurry walls or retaining walls, using piles or other longitudinal elements; b) removal of piles; c) installation of drain- or injection elements. The pile material can be timber, concrete (precast or cast in situ) or steel (tubes or rolled sections). Additionally piles may have an interlocking feature to enable adjacent piles to be joined together.

Rammausrüstung - Sicherheitsanforderungen

Diese Norm enthält Sicherheitsanforderungen an Rammausrüstungen für folgende Einsatzzwecke: a) Herstellung von Gründungen, Dichtwänden oder Stützmauern unter Verwendung von Pfählen oder anderen Rammelementen; b) Ziehen von Rammgut; c) Einbringen von Wasserhaltungs- oder Injektionselementen. Die Rammelemente können aus Holz, Beton (Fertigteil- oder Ortbeton) oder aus Stahl (Rohre oder Walzprofile) hergestellt sein. Darüber hinaus können sie ein Schloßsystem zur Verbindung nebeneinander liegender Rammelemente besitzen.

Matériel de battage - Prescriptions de sécurité

Cette norme précise les prescriptions de sécurité pour le matériel de battage adapté aux utilisations suivantes: a) construction de fondations, parois étanches ou parois moulées, utilisant des pieux ou des éléments longitudinaux; b) extraction des pieux; c) mise en place de drains ou éléments pour injection. Les pieux peuvent être en bois, en béton (préfabriqués ou coulés en place) ou en acier (tubes ou profilés laminés). De plus, ils peuvent être munis de dispositifs pour relier entre eux les pieux adjacents.

Oprema za vrtanje lukenj za zabijanje pilotov - Varnostne zahteve

General Information

Status
Withdrawn
Publication Date
12-Dec-1995
Withdrawal Date
10-Mar-2009
ICS
93.020 - Earthworks. Excavations. Foundation construction. Underground works
Technical Committee
CEN/TC 151 - Construction equipment and building material machines - Safety
Drafting Committee
CEN/TC 151/WG 2 - Piling equipment - Safety
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
11-Mar-2009
Completion Date
11-Mar-2009
Directive
89/392/EEC - Machinery - Safety of machinery: general essential health and safety requirements
98/37/EC - Machinery
Mandate
M/BC/CEN/88/13 - Standardization request to CEN/CENELEC relating to machinery
Ref Project
SIST EN 996:2000 - Piling equipment - Safety requirements

Relations

Amended By
EN 996:1995/A1:1999 - Piling equipment - Safety requirements
Effective Date
22-Dec-2008
Amended By
EN 996:1995/A2:2003 - Piling equipment - Safety requirements
Effective Date
22-Dec-2008
Merged Into
EN 996:1995+A3:2009 - Piling equipment - Safety requirements
Effective Date
21-Jan-2009

Buy Standard

EN 996:2000EN 996:2000
PreviousNext
Standard
EN 996:2000
English language
49 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 996:2000
01-april-2000
Oprema za vrtanje lukenj za zabijanje pilotov - Varnostne zahteve
Piling equipment - Safety requirements
Rammausrüstung - Sicherheitsanforderungen
Matériel de battage - Prescriptions de sécurité
Ta slovenski standard je istoveten z: EN 996:1995
ICS:
53.100 Stroji za zemeljska dela Earth-moving machinery
SIST EN 996:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 996:2000

---------------------- Page: 2 ----------------------

SIST EN 996:2000

---------------------- Page: 3 ----------------------

SIST EN 996:2000

---------------------- Page: 4 ----------------------

SIST EN 996:2000

---------------------- Page: 5 ----------------------

SIST EN 996:2000

---------------------- Page: 6 ----------------------

SIST EN 996:2000

---------------------- Page: 7 ----------------------

SIST EN 996:2000

---------------------- Page: 8 ----------------------

SIST EN 996:2000

---------------------- Page: 9 ----------------------

SIST EN 996:2000

---------------------- Page: 10 ----------------------

SIST EN 996:2000

---------------------- Page: 11 ----------------------

SIST EN 996:2000

---------------------- Page: 12 ----------------------

SIST EN 996:2000

---------------------- Page: 13 ----------------------

SIST EN 996:2000

---------------------- Page: 14 ----------------------

SIST EN 996:2000

---------------------- Page: 15 ----------------------

SIST EN 996:2000

---------------------- Page: 16 ----------------------

SIST EN 996:2000

---------------------- Page: 17 ----------------------

SIST EN 996:2000

---------------------- Page: 18 ----------------------

SIST EN 996:2000

---------------------- Page: 19 ----------------------

SIST EN 996:2000

---------------------- Page: 20 ----------------------

SIST EN 996:2000

---------------------- Page: 21 ----------------------

SIST EN 996:2000

---------------------- Page: 22 ----------------------

SIST EN 996:2000

----------------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 16228-3:2014+A1:2021(Main + Amendment)
Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD)
SIST EN 16228-3:2014+A1:2022

This European Standard, together with part 1, deals with all significant hazards for horizontal directional drilling equipment (HDD) when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in EN 16228-1:2014+A1:2021.
This document does not repeat the requirements from EN 16228-1:2014+A1:2021, but adds or replaces the requirements for application for horizontal directional drills.
A machine is considered a horizontal directional drill if it is designed to drill in a shallow arc for the installation of pipes, conduits, and cables and typically has a drill string entry angle of less than 45° relative to the operating surface of the earth.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16228-6:2014+A1:2021(Main + Amendment)
Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment
SIST EN 16228-6:2014+A1:2022

This European Standard, together with part 1, deals with all significant hazards for jetting, grouting and injection equipment when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in
EN 16228-1:2014+A1:2021.
This document does not repeat the requirements from EN 16228-1:2014+A1:2021, but adds or replaces the requirements for application for jetting, grouting and injection equipment.
Rigs for drilling, vibrating, pile driving, to be used for preparing holes for these applications are covered by EN 16228-2:2014+A1:2021 and/or EN 16228-4:2014+A1:2021.
Jetting, grouting and injection equipment is used in the preparation, transfer and application of grouting materials used for either:
-   the improvement of ground condition; or
-   the filling of voids e.g. around piles or ground anchors.
Jetting, grouting and injection equipment are constituted by all equipment and installations, operated by hand or electrically, pneumatically, mechanically or hydraulically powered, necessary for the following:
-   mixing, storing, measuring and pumping of substances (cement suspension, mortar or chemical liquids/mixtures);
-   jetting, grouting and injection processes (of/into subsoil) with low, medium or high pressure or vacuum systems;
-   deleted text
-   all control systems, electrical or mechanical pressure and flow recorders, for monitoring the grouting;
-   all jetting, grouting and injection accessories, such as: special tools, lances, rods, sockets, packers, retention clamps and swivel hooks.
This document does not apply to machines and equipment for conveying, spraying and placing concrete and mortar (covered by EN 12001).
This document does not deal with jetting, grouting or injection units intended to use products that generate toxic gases.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16228-2:2014+A1:2021(Main + Amendment)
Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining
SIST EN 16228-2:2014+A1:2022

This European Standard, together with part 1, deals with all significant hazards for mobile drill rigs for in soil or soil and rock mixture in civil and geotechnical engineering, "deleted text" when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in EN 16228 1:2014+A1:2021.
This document does not repeat the requirements from EN 16228 1:2014+A1:2021, but adds or replaces the requirements for application for mobile drill rigs.
In this document the general term "mobile drill rig" covers several different types of machines for use in:
-   civil engineering;
-   geotechnical engineering (including ground investigation, anchoring, soil nailing, mini-piling, ground stabilization, grouting);
-   water well drilling;
-   geothermal installations;
-   landfill drilling;
-   underpinning and tunnelling;
-   for use above ground as well as underground.
Typically, the process of drilling involves the addition of drill rods, tubes, casings or augers etc., normally threaded, as the borehole extends to depth.
NOTE 1   EN 16228-4:2014+A1:2021 covers machines with a rotary torque greater than 35 kNm.
NOTE 2   The term "drill rigs" includes rigs with a separate power pack supplied by the rig manufacturer.
The following machines are excluded from the scope of this document:
-   tunnelling machines, unshielded tunnel boring machines and rodless shaft boring machines for rock according to prEN 16191;
-   raise boring machines;
-   drill rigs used in oil and gas industry;
-   specialized mining machinery and equipment for opencast mining (e.g. rock drill rigs, blast hole drills) (under the scope of CEN/TC 196);
-   all underground mining machinery and equipment for the extraction of solid mineral substances (e. g. rock drill rigs, raise boring machines, shaft boring machines, mining auger boring machines, jumbos) as well as machinery and equipment for underground mine development (under the scope of CEN/TC 196);
-   core drilling machines on stand covered by EN 12348;
-   hand-held machines (in particular machines covered by ISO 11148-5).
This document is not applicable to mobile drill rigs for in soil or soil and rock mixture in civil and geotechnical engineering manufactured before the date of its publication.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16228-7:2014+A1:2021(Main + Amendment)
Drilling and foundation equipment - Safety - Part 7: Interchangeable auxiliary equipment
SIST EN 16228-7:2014+A1:2022

This European Standard, together with part 1, deals with all significant hazards for interchangeable auxiliary equipment when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in EN 16228-1:2014+A1:2021.
This document does not repeat the requirements from EN 16228-1:2014+A1:2021, but adds or replaces the requirements for application for interchangeable auxiliary equipment.
This document specifies the specific safety requirements for interchangeable auxiliary equipment to be used in drilling and foundation operations, connected with drilling and foundation equipment, agricultural equipment and/or earth moving machinery when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer.
Interchangeable auxiliary equipment includes pile installation and extraction equipment, impact hammers, extractors, vibrators, deep vibrators, static pile pushing/pulling devices, rotary percussion hammers, rotary drilling drives, drill mast equipment such as leaders equipped with a drill stem and gears attached to the boom of an excavator and casing oscillators/rotators.
Diaphragm wall cutting tools are dealt with in EN 16228-5:2014+A1:2021.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16228-1:2014+A1:2021(Main + Amendment)
Drilling and foundation equipment - Safety - Part 1: Common requirements
SIST EN 16228-1:2014+A1:2022

This European Standard specifies the common safety requirements for drilling and foundation equipment.
Part 1 of this European Standard deals with the significant hazards common to drilling and foundation equipment (see Annex A), when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (transport, assembly, dismantling, equipment in service and out of service, maintenance, moving on site, storage, disabling and scrapping).
NOTE 1   The requirements specified in this part of the standard are common to two or more families of drilling and foundation equipment.
This document gives safety requirements for all types of drilling and foundation equipment and is intended to be used in conjunction with one of parts 2 to 7. These machine specific parts do not repeat the requirements from part 1 but supplement or modify the requirements for the type of drilling and foundation equipment in question.
For multipurpose machinery, the parts of the standard that cover the specific functions and applications are used, e.g. a drilling machine also used as a piling machine will use the relevant requirements of EN 16228-1, EN 16228-2, and EN 16228-4.
The following machines are excluded from the scope of this standard:
-   tunnelling machines, unshielded tunnel boring machines and rodless shaft boring machines for rock according to EN 16191;
-   raise boring machines;
-   drill rigs used in oil and gas industry;
-   specialized mining machinery and equipment for opencast mining (e.g. rock drill rigs, blast hole drills) (under the scope of CEN/TC 196);
-   all underground mining machinery and equipment for the extraction of solid mineral substances (e.g. rock drill rigs, raise boring machines, shaft boring machines, mining auger boring machines, jumbos) as well as machinery and equipment for underground mine development (under the scope of CEN/TC 196);
-   core drilling machines on stand (covered by EN 12348);
-   hand-held machines (in particular machines covered by ISO 11148-5).
NOTE 2   Specific requirements for offshore applications are not covered by this European Standard.
Where a drilling or foundation equipment of fixed configuration that is not intended to be separated is assembled using a carrier based on earth-moving equipment, agricultural equipment, or a crane, then the completed assembly is !covered by this" standard.
Drilling and foundation equipment within the scope of EN 16228 parts 1 to 6 may include interchangeable auxiliary equipment within the scope of EN 16228-7, either as an integral part of its construction or as interchangeably fitted equipment.
!If drilling and foundation equipment is intended to be used in a potentially explosive atmosphere, or in case of lightning risk, additional requirements will need to be met which are not covered by this document.
This document is not applicable to drilling and foundation equipment manufactured before the date of its publication."

  • Standard
    176 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16228-5:2014+A1:2021(Main + Amendment)
Drilling and foundation equipment - Safety - Part 5: Diaphragm walling equipment
SIST EN 16228-5:2014+A1:2022

This European Standard, together with part 1, deals with all significant hazards for diaphragm walling equipment when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in EN 16228-1:2014+A1:2021.
This document does not repeat the requirements from EN 16228-1:2014+A1:2021, but adds or replaces the requirements for application for diaphragm walling equipment.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16228-4:2014+A1:2021(Main + Amendment)
Drilling and foundation equipment - Safety - Part 4: Foundation equipment
SIST EN 16228-4:2014+A1:2022

This European Standard, together with part 1, deals with all significant hazards for foundation equipment when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in EN 16228-1:2014+A1:2021.
This document does not repeat the requirements from EN 16228-1:2014+A1:2021 but adds or replaces the requirements for application for foundation equipment.
In this document the general term "foundation equipment" covers several different types of machines used for installation and/or extracting by drilling (machines with a rotary torque greater than 35 kNm), driving, vibrating, pushing, pulling or a combination of techniques, or any other way, of:
-   longitudinal foundation elements;
-   soil improvement by vibrating and soil mixing techniques;
-   vertical drainage.
NOTE   Some foundation equipment may have an additional rotary head with a torque less than 35 kNm for pre-drilling applications; this equipment is covered by this standard.
Machines with one or more of the following characteristics are not covered by this standard, but are covered by EN 16228-2:
-   machines that have a main rotary head torque of less than 35 kNm;
-   machines that have multi-directional drilling capability;
-   machines for which adding and removing rods or digging and drilling tools etc. is usually required during the installation/extraction process.
Typically the process of foundation techniques involves the installation of longitudinal elements such as concrete piles, steel beams, tubes and sheet piles, injection elements as tubes and hoses and casings for cast in situ.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16228-2:2014/FprA1(Amendment)
Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering in soil or soil and rock mixture
SIST EN 16228-2:2014/oprA1:2019

This European Standard, together with part 1, deals with all significant hazards for mobile drill rigs for civil and geotechnical engineering, quarrying and mining when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in EN 16228 1:2014.
This document does not repeat the requirements from EN 16228 1, but adds or replaces the requirements for application for mobile drill rigs.
In this document the general term "mobile drill rig" covers several different types of machines for use in:
-   civil engineering;
-   geotechnical engineering (including ground investigation, anchoring, soil nailing, mini-piling, ground stabilization, grouting);
-   water well drilling;
-   geothermal installations;
-   landfill drilling;
-   underpinning, tunnelling, mining and quarrying;
-   for use above ground as well as underground.
Typically, the process of drilling involves the addition of drill rods, tubes, casings or augers etc., normally threaded, as the borehole extends to depth.
NOTE 1   For machines with torque greater than 35 kNm see EN 16228-4 initially.
NOTE 2   The term "drill rigs" includes rigs with a separate power pack supplied by the rig manufacturer.
Modification to the Scope:
First paragraph, delete ", quarrying and mining" and add "in soil or soil and rock mixture in" to read as follows:
"This European Standard, together with part 1, deals with all significant hazards for mobile drill rigs for in soil or soil and rock mixture in civil and geotechnical engineering when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).".

  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16228-3:2014/FprA1(Amendment)
Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD)
SIST EN 16228-3:2014/oprA1:2019

This European Standard, together with part 1, deals with all significant hazards for horizontal directional drilling equipment (HDD) when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in EN 16228 1:2014.
This document does not repeat the requirements from EN 16228 1, but adds or replaces the requirements for application for horizontal directional drills.
A machine is considered a horizontal directional drill if it is designed to drill in a shallow arc for the installation of pipes, conduits, and cables and typically has a drill string entry angle of less than 45° relative to the operating surface of the earth.

  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16228-7:2014/FprA1(Amendment)
Drilling and foundation equipment - Safety - Part 7: Interchangeable auxiliary equipment
SIST EN 16228-7:2014/kprA1:2021

This European Standard, together with part 1, deals with all significant hazards for interchangeable auxiliary equipment when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in EN 16228 1:2014.
This document does not repeat the requirements from EN 16228 1, but adds or replaces the requirements for application for interchangeable auxiliary equipment.
This document specifies the specific safety requirements for interchangeable auxiliary equipment to be used in drilling and foundation operations, connected with drilling and foundation equipment, agricultural equipment and/or earth moving machinery when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer.
Interchangeable auxiliary equipment includes pile installation and extraction equipment, impact hammers, extractors, vibrators, deep vibrators, static pile pushing/pulling devices, rotary percussion hammers, rotary drilling drives, drill mast equipment such as leaders equipped with a drill stem and gears attached to the boom of an excavator and casing oscillators/rotators.
Diaphragm wall cutting tools are dealt with in EN 16228 5.

  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day