Shutters and external venetian blinds - Performance requirements including safety

This European Standard specifies the performance requirements for shutters and external venetian blinds intended to be fitted externally to buildings and other construction works. It deals also with the significant hazards for assembly, transport, installation, operation and maintenance (see list of significant machine hazards in Annex C).
It applies to all shutters and external venetian blinds whatever their use and nature of the materials used, as follows and defined in EN 12216:
-   external venetian blind, roller shutter, wing shutter, Venetian shutter, flat-closing concertina shutter, concertina shutter or sliding panel shutter, with or without a system of projection.
These products can be operated manually with or without compensating spring, or by means of electric motors (power operated products). However, the durability and endurance of the autonomous supply for power operated shutters and external venetian blinds not connected to the mains supply are not covered.
This European Standard deals also with all significant hazards, hazardous situations and events when shutters and external venetian blinds are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex D).
This European Standard covers shutters and external venetian blinds mounted externally. In case such products are installed internally, they should fulfil all relevant safety requirements defined in EN 13120.
The noise emission of power operated shutters and external venetian blinds is not considered to be a relevant hazard health and safety requirements. Therefore this European Standard does not contain any specific requirements on noise health and safety objective.

Abschlüsse außen und Außenjalousien - Leistungs- und Sicherheitsanforderungen

Diese Europäische Norm legt die Leistungsanforderungen für Abschlüsse außen und Außenjalousienfest, die zur äußeren Befestigung an Gebäude und anderen baulichen Anlagen vorgesehen sind. Sie behandelt auch wesentliche Gefährdungen für Zusammenbau, Transport, Einbau, Bedienung und Instandhaltung (siehe Liste der signifikanten Gefährdungen in Anhang C).
Die Norm gilt für alle Abschlüsse außen und Außenjalousien, unabhängig von ihrem Gebrauch und der Art der verwendeten Werkstoffe wie folgt und wie in EN 12216 festgelegt:
-   Außenjalousie, Rollladen, Drehladen, Faltladen ungeführt, Faltladen geführt (flach geschlossen), Falt¬laden geführt (Akkordeon) oder Schiebeladen, mit oder ohne eine Ausstellvorrichtung.
Diese Produkte können manuell bedient werden, mit oder ohne Ausgleichsfedern, oder mithilfe von Elektromotoren (kraftbetätigte Produkte). Dennoch werden Haltbarkeit und Lebensdauer der eigenständigen Stromversorgung kraftbetätigter Abschlüsse außen und Außenjalousien, die nicht mit der Hauptstrom¬versorgung verbunden sind, nicht behandelt.
Diese Europäische Norm behandelt zugleich wesentliche Gefährdungen, Gefährdungssituationen und Gefährdungsereignisse, wenn die äußeren Abschlüsse und Markisen wie vorgesehen verwendet werden und unter den Bedingungen eines unsachgemäßen Gebrauchs, die durch den Hersteller vernünftigerweise vorhersehbar sind (siehe Anhang B).
Diese Europäische Norm behandelt Abschlüsse und Jalousien, die an der Außenseite montiert sind. In Fällen, in denen diese Produkte an der Innenseite montiert sind, sollten sie sämtliche in EN 13120 festgelegten Sicherheits¬anforderungen erfüllen.
Die Geräuschemission von kraftbetätigten Abschlüssen und Außenjalousien wird nach den Sicherheits- und Gesundheitsanforderungen für Maschinen nicht als maßgebliche Gefährdung angesehen. Aus diesem Grund enthält diese Europäische Norm keine spezifischen Anforderungen bezüglich sicherheits- und gesundheits-bezogener Geräuschvorgaben.

Fermetures et stores vénitiens extérieurs - Exigences de performance y compris la sécurité

La présente Norme européenne spécifie les exigences de performance applicables aux fermetures et stores vénitiens extérieurs destinés à être installés en extérieur sur des bâtiments et autres ouvrages de construction. Elle traite également des phénomènes dangereux significatifs relatifs aux opérations d’assemblage, de transport, d’installation, d’utilisation et de maintenance (voir liste des phénomènes dangereux significatifs liés aux machines à l’Annexe C).
Elle s'applique à toutes les fermetures et à tous les stores vénitiens extérieurs, dont la liste est donnée ci-après, quelles que soient leur conception et la nature des matériaux utilisés, et qui sont définis dans l’EN 12216 :
-   store vénitien extérieur, volet roulant, volet battant, persienne, persienne coulissante, jalousie accordéon ou volet coulissant, projetables ou non projetables.
Ces produits peuvent être manœuvrés manuellement avec ou sans ressort de compensation ou au moyen de moteurs électriques (produits motorisés). Néanmoins, la durabilité et l’endurance de l’alimentation autonome des fermetures et stores vénitiens extérieurs non reliée à l’alimentation secteur ne sont pas couvertes.
La présente Norme européenne couvre également tous les phénomènes, situations et événements dangereux rencontrés lorsque les fermetures et stores vénitiens extérieurs sont utilisés selon leur usage prévu mais aussi ceux rencontrés lors de fausses manœuvres que le fabricant peut raisonnablement anticiper (voir Annexe D).
La présente Norme européenne couvre les fermetures et stores vénitiens extérieurs installés en extérieur. Si ces produits sont installés en intérieur, il convient qu’ils satisfassent à toutes les exigences de sécurité pertinentes définies dans l’EN 13120.
Le bruit émis par les fermetures et stores vénitiens extérieurs motorisés n’est pas considéré comme un phénomène dangereux devant satisfaire aux exigences en matière de santé et de sécurité. Par conséquent, la présente Norme européenne ne contient aucune exigence particulière applicable au bruit établissant des objectifs en matière de santé et de sécurité.

Polkna in zunanje žaluzije - Zahtevane lastnosti, vključno z varnostjo

General Information

Status
Published
Publication Date
19-May-2015
Withdrawal Date
27-Feb-2017
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
07-Dec-2020

Relations

Buy Standard

Standard
EN 13659:2015
English language
69 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.RVWMRAbschlüsse außen und Außenjalousien - Leistungs- und SicherheitsanforderungenFermetures et stores vénitiens extérieurs - Exigences de performance y compris la sécuritéShutters and external venetian blinds - Performance requirements including safety91.060.50Vrata in oknaDoors and windowsICS:Ta slovenski standard je istoveten z:EN 13659:2015SIST EN 13659:2015en,fr,de01-julij-2015SIST EN 13659:2015SLOVENSKI
STANDARDSIST EN 13659:2004+A1:20091DGRPHãþD



SIST EN 13659:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13659
May 2015 ICS 91.060.50 Supersedes EN 13659:2004+A1:2008English Version
Shutters and external venetian blinds - Performance requirements including safety
Fermetures et stores vénitiens extérieurs - Exigences de performance y compris la sécurité
Abschlüsse außen und Außenjalousien - Leistungs- und Sicherheitsanforderungen This European Standard was approved by CEN on 16 February 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13659:2015 ESIST EN 13659:2015



EN 13659:2015 (E) Contents Page Foreword .5 Introduction .7 1 Scope .8 2 Normative references .8 3 Terms and definitions . 10 4 Product characteristics . 11 4.1 Resistance to wind loads . 11 4.2 Resistance of non retractable elements to pressure loads . 12 4.3 Resistance to snow load (roller shutters only) . 12 4.3.1 General . 12 4.3.2 Determination of performance . 13 4.3.3 Performance requirement . 13 4.3.4 Expression of the results . 13 4.3.5 Classes of snow resistance . 13 4.4 Operating effort . 13 4.4.1 General . 13 4.4.2 Determination of performance .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.