EN ISO 15548-3:2008

Non-destructive testing - Equipment for eddy current examination - Part 3: System characteristics and verification (ISO 15548-3:2008)

ISO 15548-3:2008 identifies the functional characteristics of a general-purpose eddy current system and provides methods for their measurement and verification.
The evaluation of these characteristics permits a well-defined description and comparability of an eddy current equipment.
By careful choice of the characteristics, a consistent and effective eddy current examination system can be designed for a specific application.
Where accessories are used, these are characterised using the principles of ISO 15548-3:2008.
ISO 15548-3:2008 does not give the extent of verification nor acceptance criteria for the characteristics. These are given in the application documents.

Zerstörungsfreie Prüfung - Technische Ausrüstung für die Wirbelstromprüfung - Teil 3: Kenngrößen des Systems und deren Verifizierung (ISO 15548-3:2008)

Dieser Teil von ISO 15548 legt die Funktionskennwerte von Wirbelstromprüfsystemen für die allgemeine Anwendung fest und enthält Verfahren für ihre Messung und Verifizierung.
Die Bewertung dieser Kennwerte erlaubt eine verständliche Beschreibung und Vergleichbarkeit von Wirbelstromprüfeinrichtungen.
Mit einer sorgfältigen Auswahl der Kennwerte ist es möglich, ein angemessenes und effizientes Wirbelstromprüfsystem für einen besonderen Anwendungsfall aufzubauen.
Zusatzeinrichtungen sollten, sofern sie eingesetzt werden, nach den Grundlagen dieses Teils von ISO 15548 charakterisiert werden.
Dieser Teil von ISO 15548 enthält weder Vorschriften für den Umfang der Verifizierung noch für die Annahmekriterien der Kennwerte. Diese werden in den Anwendungsdokumenten angegeben.

Essais non destructifs - Appareillage pour examen par courants de Foucault - Partie 3: Caractéristiques du système et vérifications (ISO 15548-3:2008)

L'ISO 15548-3:2008 identifie les caractéristiques fonctionnelles d'un système à courants de Foucault à usage général et fournit des méthodes pour les mesurer et les vérifier.
L'évaluation de ces caractéristiques permet de donner une description bien définie de l'appareillage à courants de Foucault et d'assurer la comparabilité entre appareillages.
Un système d'examen par courants de Foucault, cohérent et efficace, peut être conçu par un choix judicieux des caractéristiques pour une application spécifique.
Il convient que les accessoires, lorsqu'ils sont mis en œuvre, soient caractérisés en utilisant les principes de l'ISO 15548-3:2008.
L'ISO 15548-3:2008 ne fournit pas l'étendue des vérifications ni des critères d'acceptation pour les caractéristiques. Ceux-ci sont définis dans les documents d'application.

Neporušitveno preskušanje - Oprema za preskušanje z vrtinčnimi tokovi - 3. del: Značilnosti sistemov in preverjanje (ISO 15548-3:2008)

General Information

• Status: Published
• Publication Date: 14-Sep-2008
• Withdrawal Date: 30-Mar-2009
• ICS: 19.100 - Non-destructive testing
• Technical Committee: CEN/TC 138 - Non-destructive testing
• Drafting Committee: CEN/TC 138/WG 3 - Eddy current testing
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 15-Sep-2008
• Due Date: 15-Dec-2008
• Completion Date: 15-Sep-2008
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN ISO 15548-3:2009 - Non-destructive testing - Equipment for eddy current examination - Part 3: System characteristics and verification (ISO 15548-3:2008)

Relations

• Replaces: EN 13860-3:2003 - Non-destructive testing - Eddy current examination - Equipment characteristics and verification - Part 3: System characteristics and verification
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
01-april-2009
1DGRPHãþD
SIST EN 13860-3:2004
1HSRUXãLWYHQRSUHVNXãDQMH2SUHPD]DSUHVNXãDQMH]YUWLQþQLPLWRNRYLGHO
=QDþLOQRVWLVLVWHPRYLQSUHYHUMDQMH,62
Non-destructive testing - Equipment for eddy current examination - Part 3: System
characteristics and verification (ISO 15548-3:2008)
Zerstörungsfreie Prüfung - Wirbelstromprüfung - Kenngrößen von Prüfeinrichtungen und
deren Verifizierung - Teil 3: Kenngrößen des Systems und deren Verifizierung (ISO
15548-3:2008)
Essais non destructifs - Équipement pour examens par courants de Foucault - Partie 3:
Caractéristiques et vérification des systemes (ISO 15548-3:2008)
Ta slovenski standard je istoveten z: EN ISO 15548-3:2008
ICS:
19.100 Neporušitveno preskušanje Non-destructive testing
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 15548-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2008
ICS 19.100 Supersedes EN 13860-3:2003
English Version
Non-destructive testing - Equipment for eddy current
examination - Part 3: System characteristics and verification
(ISO 15548-3:2008)
Essais non destructifs - Appareillage pour examen par Zerstörungsfreie Prüfung - Prüfeinrichtung für
courants de Foucault - Partie 3: Caractéristiques du Wirbelstromprüfung - Teil 3: Kenngrößen des Systems und
système et vérifications (ISO 15548-3:2008) Verifizierung (ISO 15548-3:2008)
This European Standard was approved by CEN on 18 July 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15548-3:2008: E
worldwide for CEN national Members.

Contents Page
Foreword.3

Foreword
This document (EN ISO 15548-3:2008) has been prepared by Technical Committee CEN/TC 138 “Non-
destructive testing”, the secretariat of which is held by AFNOR, in collaboration with Technical Committee
ISO/TC 135 "Non-destructive testing".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2009, and conflicting national standards shall be withdrawn at
the latest by March 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 13860-3:2003.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directive(s).
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

INTERNATIONAL ISO
STANDARD 15548-3
First edition
2008-09-15
Non-destructive testing — Equipment for
eddy current examination —
Part 3:
System characteristics and verification
Essais non destructifs — Appareillage pour examen par courants de
Foucault —
Partie 3: Caractéristiques du système et vérifications

Reference number
ISO 15548-3:2008(E)
©
ISO 2008
ISO 15548-3:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
©
ii ISO 2008 – All rights reserved

ISO 15548-3:2008(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO15548-3 was prepared by European Committee for Standardization (CEN) Technical Committee
CEN/TC 138, Non-destructive testing, in collaboration with ISO Technical Committee TC 135, Non-destructive
testing, Subcommittee SC4, Eddy current methods, in accordance with the Agreement on technical
cooperation between ISO and CEN (Vienna Agreement).
ISO 15548 consists of the following parts, under the general title Non-destructive testing — Equipment for eddy
current examination:
— Part 1: Instrument characteristics and verification
— Part 2: Probe characteristics and verification
— Part 3: System characteristics and verification
©
ISO 2008 – All rights reserved ii
...