EN 14678-2:2007

LPG equipment and accessories - Equipment for Liquefied Petroleum Gas automotive filling stations - Part 2: Components other than dispensers, and installation requirements

This European Standard covers the installation requirements, on fixed LPG filling stations and on multi-fuel filling stations, for the automotive LPG equipment and components, which are required to safely dispense automotive LPG.
This European Standard does not cover on-site and off-site safety distances.
NOTE   Users of this European Standard should be aware that National regulations may be in place covering all or some of the requirements of this European Standard. National regulations over-ride any requirement in this European Standard in the states where they apply.

Flüssiggas-Geräte und Ausrüstungsteile - Flüssiggas-Geräte für Autogas-Tankstellen - Teil 2: Bauteile, außer Zapfsäulen, und Anforderungen an die Aufstellung

Diese Europäische Norm enthält Anforderungen an die Aufstellung von Flüssiggas- und Mehrstoff-Tankstellen für die Fahrzeugausrüstung für Flüssiggas (LPG), die zum sicheren Abgeben von Autogas erforderlich sind.
Diese Europäische Norm enthält keine Sicherheitsabstände für den eingebauten Zustand und außerhalb des Einbauortes.
ANMERKUNG   Anwender dieser Europäischen Norm sollten beachten, dass Nationale Vorschriften für alle oder einige Anforderungen in dieser Norm gelten können. Nationale Vorschriften haben in den jeweiligen Staaten Vorrang vor sämtlichen Anforderungen in dieser Europäischen Norm.

Equipements pour GPL et leurs accessoires - Equipements devant être utilisés dans les stations-service GPL - Partie 2: Composants autres que les distributeurs, et exigences d'installation

La présente Norme européenne couvre les exigences d’installation dans les stations-service GPL et multi carburants d’équipements GPL et de leurs composants nécessaires pour distribuer du GPL carburant en toute sécurité.
La présente Norme européenne ne couvre pas les distances de sécurité sur site et hors site.
NOTE   Il convient que les utilisateurs de la présente Norme européenne soient conscients du fait qu’il peut exister des réglementations nationales couvrant la totalité ou une partie des exigences de la présente Norme européenne. Les réglementations nationales annulent toute exigence de la présente Norme européenne dans les pays où elles s’appliquent.

Oprema in dodatki za UNP - Oprema za črpalke za avtoplin - 2. del: Elementi, razen avtomatov za točenje goriva, z zahtevami za vgradnjo

General Information

• Status: Withdrawn
• Publication Date: 09-Oct-2007
• Withdrawal Date: 07-Feb-2012
• ICS: 75.200 - Petroleum products and natural gas handling equipment
• Technical Committee: CEN/TC 286 - Liquefied petroleum gas equipment and accessories
• Drafting Committee: CEN/TC 286/WG 6 - Automative LPG system
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 08-Feb-2012
• Completion Date: 08-Feb-2012
• Ref Project: SIST EN 14678-2:2009 - LPG equipment and accessories - Equipment for Liquefied Petroleum Gas automotive filling stations - Part 2: Components other than dispensers, and installation requirements

Relations

• Merged Into: EN 14678-2:2007+A1:2012 - LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 2: Components other than dispensers and installation requirements
• Effective Date: 07-Dec-2011
• Amended By: EN 14678-2:2007/FprA1 - LPG equipment and accessories - Equipment for Liquefied Petroleum Gas automotive filling stations - Part 2: Components other than dispensers, and installation requirements
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Flüssiggas-Geräte und Ausrüstungsteile - Flüssiggas-Geräte für Autogas-Tankstellen - Teil 2: Bauteile, außer Zapfsäulen, und Anforderungen an die AufstellungÉquipements pour GPL et leurs accessoires - Équipements devant etre utilisés dans les stations-service GPL - Partie 2: Composants autres que les distributeurs, et exigences d'installationLPG equipment and accessories - Equipment for Liquefied Petroleum Gas automotive filling stations - Part 2: Components other than dispensers, and installation requirements75.200Petroleum products and natural gas handling equipmentICS:Ta slovenski standard je istoveten z:EN 14678-2:2007SIST EN 14678-2:2009en,fr,de01-april-2009SIST EN 14678-2:2009SLOVENSKI
STANDARD



SIST EN 14678-2:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14678-2October 2007ICS 75.200 English VersionLPG equipment and accessories - Equipment for LiquefiedPetroleum Gas automotive filling stations - Part 2: Componentsother than dispensers, and installation requirementsEquipements pour GPL et leurs accessoires - Equipementsdevant être utilisés dans les stations-service GPL - Partie2: Composants autres que les distributeurs, et exigencesd'installationFlüssiggas-Geräte und Ausrüstungsteile - Flüssiggas-Geräte für Autogas-Tankstellen - Teil 2: Bauteile, außerZapfsäulen, und Anforderungen an die AufstellungThis European Standard was approved by CEN on 11 August 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14678-2:2007: ESIST EN 14678-2:2009



EN 14678-2:2007 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.5 4 Requirements.6 4.1 General.6 4.2 Design pressure.7 4.3 Design temperature.7 4.4 Materials.7 4.5 Corrosion protection.7 4.5.1 General.7 4.5.2 Cathodic protection.7 4.6 Storage tank.8 4.6.1 Design.
...