Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength

This standard specifies the conditions for determination of the flexural strength of ceramic matrix composite materials with continuous fibre reinforcement under three-point or four-point bending for temperatures up to 1700°C in air at atmospheric pressure. This Prestandard applies to all ceramic matrix composites with a continuous fibre reinforcement, unidirectional (1D), bidirectional (2D), and tridirectional (xD, with 2

Hochleistungskeramik - Mechanische Eigenschaften von keramischen Verbundwerkstoffen bei hoher Temperatur au Luft bei Atmosphärendruck - Bestimmunng der Beigefestigkeit

Céramiques techniques avancées - Propriétés mécaniques des céramiques composites à haute température sous air à pression atmosphérique - Détermination de la résistance en flexion

La présente Norme européenne a pour objet de fixer les conditions de détermination de la résistance en flexion des matériaux composites à matrice céramique et à renfort de fibre continu par un essai de flexion 3 points ou 4 points, à des températures allant jusqu'à 1 700 °C sous air à la pression atmosphérique.
La présente Norme s'applique à tous les matériaux composites à matrice céramique à renforts de fibre continus, unidirectionnels (1D), bidirectionnels (2D) et tridirectionnels (xD avec 2    x   3) sollicités suivant une direction principale de renfort.
NOTE 1   Dans la plupart des cas, les composites à matrice céramique destinés à un usage à haute température sous air sont protégés par un revêtement anti-oxydation.
NOTE 2   L'objet de la présente Norme est de déterminer la résistance en flexion d'un matériau placé en ambiance oxydante et non pas de quantifier l'oxydation.

Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength

General Information

Status
Withdrawn
Publication Date
22-Oct-2002
Withdrawal Date
05-Jul-2023
Current Stage

Relations

Buy Standard

Standard
EN 12789:2004
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strengthHochleistungskeramik - Mechanische Eigenschaften von keramischen Verbundwerkstoffen bei hoher Temperatur au Luft bei Atmosphärendruck - Bestimmunng der BeigefestigkeitCéramiques techniques avancées - Propriétés mécaniques des céramiques composites a haute température sous air a pression atmosphérique - Détermination de la résistance en flexionAdvanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength81.060.30Sodobna keramikaAdvanced ceramicsICS:Ta slovenski standard je istoveten z:EN 12789:2002SIST EN 12789:2004en01-januar-2004SIST EN 12789:2004SLOVENSKI
STANDARDSIST ENV 12789:20001DGRPHãþD



SIST EN 12789:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12789October 2002ICS 81.060.30Supersedes ENV 12789:1998English versionAdvanced technical ceramics - Mechanical properties of ceramiccomposites at high temperature under air at atmosphericpressure - Determination of flexural strengthCéramiques techniques avancées - Propriétés mécaniquesdes céramiques composites à haute température sous air àpression atmosphérique - Détermination de la résistanceen flexionHochleistungskeramik - Mechanische Eigenschaften vonkeramischen Verbundwerkstoffen bei hoher Temperatur auLuft bei Atmosphärendruck - Bestimmunng derBeigefestigkeitThis European Standard was approved by CEN on 7 September 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12789:2002 ESIST EN 12789:2004



EN 12789:2002 (E)2ContentspageForeword.31Scope.42Normative references.43Principle.44Terms and definitions.45Apparatus.55.1Test machine.55.2Test jig.55.3Set-up for heating.55.4Temperature measurement.65.5Data recording system.65.6Micrometers.66Test pieces.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.