Water conditioning equipment inside buildings - Active media filters - Requirements for performance, safety and testing

This European Standard specifies requirements relating to the construction, performance and methods of testing for active media filters for drinking water installations inside buildings, with a maximum working pressure of at least 1 000 kPa and a maximum working temperature of less than 30 °C. It only concerns units, which are permanently connected to the mains supply at the point of entry or point of use.
This standard applies only to filter systems comprising a housing and filter media tested together.
It includes capsule type units where both the element and its outer housing are disposable.
NOTE   Products intended for use in water supply systems are to comply, when existing, with national regulations and testing arrangements that ensure fitness for contact with drinking water. The Member States relevant regulators and the EC Commission agreed on the principle of a future unique European Acceptance Scheme (EAS) which would provide a common testing and approval arrangement at European level.
If and when the EAS is adopted, European Standards on products will be amended by the addition of an Annex Z/EAS under Mandate M/136 which will contain formal references to the testing, certification and product marking requirements of the EAS. Until the EAS comes into force, the current national regulations remain applicable.

Anlagen zur Behandlung von Trinkwasser innerhalb von Gebäuden - Filter mit aktiven Substanzen - Anforderungen an Ausführung, Sicherheit und Prüfung

Diese Europäische Norm legt Anforderungen an die Konstruktion, Leistung und Prüfverfahren für Filter mit
aktiven Substanzen für Trinkwasser-Installationen in Gebäuden mit einem maximalen Arbeitsdruck von
höchstens 1 000 kPa und einer maximalen Arbeitstemperatur von höchstens 30 °C fest. Sie gilt nur für
Einheiten, die fest mit der Hausinstallation am Eintrittspunkt oder an der Verbrauchsstelle verbunden sind.
Diese Norm gilt nur für Filtersysteme, die ein Gehäuse und eine Filterkartusche aufweisen, die zusammen
geprüft werden.
Sie beinhaltet Kapselfilter-Systeme, bei denen die Filterkartusche und das Außengehäuse entsorgt werden
können.
ANMERKUNG Produkte für die Verwendung in Wasserversorgungssystemen, soweit vorhanden, erfüllen die
nationalen Bestimmungen und Prüfanforderungen, die ihre Eignung für den Kontakt mit Trinkwasser bestätigen. Die für
die Mitgliedstaaten zuständigen Behörden und die EU-Kommission haben sich auf die Prinzipien eines zukünftigen
einheitlichen Europäischen Zulassungssystems (EAS) geeinigt, welches eine gemeinsame Prüf- und Zulassungsregelung
auf europäischer Basis bietet.
Falls und sobald EAS eingeführt ist, werden die Europäischen Produktnormen um einen Anhang Z/EAS unter dem
Mandat M/136 ergänzt, in welchem formale Verweise auf die Anforderungen für die Prüfung, die Zertifizierung und die
Produktkennzeichnung im Rahmen des EAS gegeben werden. Bis das EAS in Kraft gesetzt ist, bleiben die derzeitigen
nationalen Vorschriften anwendbar.

Appareils de conditionnement d'eau à l'intérieur des bâtiments - Filtres à média actifs - Exigences relatives aux performances, à la sécurité et aux essais

La présente Norme européenne  prescrit les exigences relatives  à  la construction, aux  performances et aux
méthodes d'essai des filtres à média actifs destinés aux installations d'eau potable à l'intérieur des bâtiments,
avec une pression de service maximale de 1 000 kPa et une température de service maximale de 30 °C. Elle
concerne uniquement les unités qui sont raccordées en permanence au réseau public, que ce soit au point
d'entrée ou au point d'utilisation.
La présente norme ne s'applique qu'aux systèmes de filtres comportant un logement et un média filtrant qui
sont soumis à l'essai ensemble.
Il s'agit notamment de filtres monocorps, où l'élément et son logement sont tous deux jetables.
NOTE  Les  produits  destinés  à  l'usage  dans  les  systèmes  d'alimentation  en  eau  doivent  être  conformes  aux
réglementations nationales et aux dispositions d'essais existant éventuellement pour assurer qu'ils sont aptes au contact
avec l'eau potable. Les réglementeurs respectifs des États membres et la Commission CE ont convenu du principe d'un
futur  système  européen  d'homologation  (European  Acceptance  Scheme  =  EAS)  unique,  qui  fournirait  à  l'échelon
européen un cadre commun d'essai et d'agrément.
Quand  l'EAS  sera  adopté,  s'il  l'est,  les  normes  européennes  de  produits  seront  amendées  par  l'ajout  d'une
Annexe ZA/EAS  selon  le  Mandat  M/136,  qui  contiendra  des  références  formelles  aux  exigences  de  l'EAS  en  matière
d'essais,  de  certification  et  de  marquage  du  produit  de  l'EAS.  En  attendant  l'entrée  en  vigueur  de  l'AES,  les
réglementations nationales actuelles demeurent en vigueur.

Oprema, ki se uporablja za pripravo pitne vode v stavbah - Filtri z aktivnimi snovmi - Zahteve za delovanje, varnost in preskušanje

General Information

Status
Withdrawn
Publication Date
31-May-2006
Withdrawal Date
12-Jun-2007
Technical Committee
Drafting Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
13-Jun-2007
Completion Date
13-Jun-2007

Relations

Buy Standard

Standard
EN 14898:2006
English language
27 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Oprema, ki se uporablja za pripravo pitne vode v stavbah - Filtri z aktivnimi snovmi - Zahteve za delovanje, varnost in preskušanjeAnlagen zur Behandlung von Trinkwasser innerhalb von Gebäuden - Filter mit aktiven Substanzen - Anforderungen an Ausführung, Sicherheit und PrüfungAppareils de conditionnement d'eau a l'intérieur des bâtiments - Filtres a média actifs - Exigences relatives aux performances, a la sécurité et aux essaisWater conditioning equipment inside buildings - Active media filters - Requirements for performance, safety and testing91.140.60Sistemi za oskrbo z vodoWater supply systems13.060.20Pitna vodaDrinking waterICS:Ta slovenski standard je istoveten z:EN 14898:2006SIST EN 14898:2006en01-oktober-2006SIST EN 14898:2006SLOVENSKI
STANDARD



SIST EN 14898:2006



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14898June 2006ICS 91.140.60 English VersionWater conditioning equipment inside buildings - Active mediafilters - Requirements for performance, safety and testingAppareils de conditionnement d'eau à l'intérieur desbâtiments - Filtres à média actifs - Exigences relatives auxperformances, à la sécurité et aux essaisAnlagen zur Behandlung von Trinkwasser innerhalb vonGebäuden - Filter mit aktiven Substanzen - Anforderungenan Ausführung, Sicherheit und PrüfungThis European Standard was approved by CEN on 27 April 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14898:2006: ESIST EN 14898:2006



EN 14898:2006 (E) 2 Contents Page Foreword.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.6 4 System design requirements.8 4.1 Materials of construction.8 4.2 Working conditions.8 4.2.1 Working temperature.8 4.2.2 Working flow.8 4.3 Filter cartridge replacement.8 4.4 End connections.8 4.5 Backflow prevention.8 4.6 Exchange indicator.8 5 Performance requirements.9 5.1 Pressure strength of the filter housing.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.