EN 2954-001:2010

Aerospace series - Macrostructure of titanium and titanium alloy wrought products - Part 001: General requirements

This standard specifies the conditions for the macrographic examination of titanium and titanium alloy bar, section, forging stock and forgings. Specific macrostructures are defined in EN 2954-002.
This standard shall be applied in conjunction with EN material standards and technical specifications, which define the acceptance criteria unless otherwise specified on the order.

Luft- und Raumfahrt - Makrostruktur von geschmiedeten Erzeugnissen aus Titan und Titanlegierungen - Teil 001: Allgemeine Anforderungen

Diese Europäische Norm legt die Bedingungen für die makrographische Untersuchung von Stangen, Profilen,
Schmiedevormaterial und Schmiedestücken aus Titan und Titanlegierungen fest. Typische Makrostrukturen
sind in EN 2954-002 festgelegt.
Die vorliegende Norm muss in Verbindung mit den EN-Werkstoffnormen und technischen Spezifikationen
angewendet werden, die die Annahmekriterien festlegen, sofern nicht anders in der Bestellung festgelegt.

Série aérospatiale - Macrostructure de produits corroyés en titane et en alliages de titane - Partie 001 : Exigences générales

Aeronavtika - Makrostruktura gnetenih izdelkov iz titana in titanovih zlitin - 001. del: Splošne zahteve

Ta standard določa pogoje za makrografsko pregledovanje palic, profilov, materiala za kovanje ter izkovkov iz titana in titanovih zlitin. Posebne makrostrukture so opredeljene v EN 2954-002. Ta standard velja skupaj z EN standardi za materiale in tehnične specifikacije, ki opredeljujejo merila sprejemljivosti, razen če je s sklepom drugače določeno.

General Information

• Status: Published
• Publication Date: 23-Mar-2010
• Withdrawal Date: 29-Sep-2010
• ICS: 49.025.30 - Titanium
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4 - Metallic
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 24-Mar-2010
• Completion Date: 24-Mar-2010
• Ref Project: SIST EN 2954-001:2010 - Aerospace series - Macrostructure of titanium and titanium alloy wrought products - Part 001: General requirements

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aeronavtika - Makrostruktura gnetenih izdelkov iz titana in titanovih zlitin - 001. del: Splošne zahteveLuft- und Raumfahrt - Makrostruktur von geschmiedeten Erzeugnissen aus Titan und Titanlegierungen - Teil 001: Allgemeine AnforderungenSérie aérospatiale - Macrostructure de produits corroyés en titane et en alliages de titane - Partie 001: Exigences généralesAerospace series - Macrostructure of titanium and titanium alloy wrought products - Part 001: General requirements49.025.30TitanTitaniumICS:Ta slovenski standard je istoveten z:EN 2954-001:2010SIST EN 2954-001:2010en01-maj-2010SIST EN 2954-001:2010SLOVENSKI
STANDARD



SIST EN 2954-001:2010



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2954-001
March 2010 ICS 49.025.30 English Version
Aerospace series - Macrostructure of titanium and titanium alloy wrought products - Part 001: General requirements
Série aérospatiale - Macrostructure de produits corroyés en titane et en alliages de titane - Partie 001 : Exigences générales
Luft- und Raumfahrt - Makrostruktur von geschmiedeten Erzeugnissen aus Titan und Titanlegierungen - Teil 001: Allgemeine Anforderungen This European Standard was approved by CEN on 6 February 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2954-001:2010: ESIST EN 2954-001:2010



EN 2954-001:2010 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Sampling .44Preparation of samples for examination
............................................................................................45Examination ............................................................................................................................................5Bibliography ........................................................................................................................................................6SIST EN 2954-001:2010



EN 2954-001:2010 (E) 3 Foreword This document (EN 2954-001:2010) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2010, and conflicting national standards shall be withdrawn at the latest by September 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Lu
...