EN 2954-002:2010

Aerospace series - Macrostructure of titanium and titanium alloy wrought products - Part 002: Macrostructure of bar, section, forging stock and forgings

This European Standard contains pictures of the macrostructure of bar, section, forging stock and forgings for titanium and titanium alloy wrought products.
This European Standard shall be used in conjunction with EN 2954-001.

Luft- und Raumfahrt - Makrostruktur von geschmiedeten Erzeugnissen aus Titan und Titanlegierungen - Teil 002: Makrostruktur von Stangen, Profilen, Schmiedevormaterial und Schmiedestücken

Diese Europäische Norm enthält Bilder der Makrostruktur von geschmiedeten Erzeugnissen in Form von
Stangen, Profilen, Schmiedevormaterial und Schmiedestücken aus Titan und Titanlegierung.
Diese Europäische Norm muss in Verbindung mit EN 2954-001 angewendet werden.

Série aérospatiale - Macrostructure de produits corroyés en titane et en alliages de titane - Partie 002: Macrostructure des barres, profilés, pièces destinées à la forge et pièces forgées

Aeronavtika - Makrostruktura gnetenih izdelkov iz titana in titanovih zlitin - 002. del: Makrostruktura palic, profilov, materiala za kovanje in izkovkov

Ta evropski standard vsebuje slike makrostrukture obdelanih proizvodov palic, profilov, materialov za kovanje in izkovkov iz titana in titanovih zlitin.  Ta evropski standard se uporablja skupaj z EN 2954-001.

General Information

• Status: Published
• Publication Date: 09-Mar-2010
• Withdrawal Date: 29-Sep-2010
• ICS: 49.025.30 - Titanium
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4 - Metallic
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 10-Mar-2010
• Completion Date: 10-Mar-2010
• Ref Project: SIST EN 2954-002:2010 - Aerospace series - Macrostructure of titanium and titanium alloy wrought products - Part 002: Macrostructure of bar, section, forging stock and forgings

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aeronavtika - Makrostruktura gnetenih izdelkov iz titana in titanovih zlitin - 002. del: Makrostruktura palic, profilov, materiala za kovanje in izkovkovLuft- und Raumfahrt - Makrostruktur von geschmiedeten Erzeugnissen aus Titan und Titanlegierungen - Teil 002: Makrostruktur von Stangen, Profilen, Schmiedevormaterial und SchmiedestückenSérie aérospatiale - Macrostructure de produits corroyés en titane et en alliages de titane - Partie 002: Macrostructure des barres, profilés, pièces destinées à la forge et pièces forgéesAerospace series - Macrostructure of titanium and titanium alloy wrought products - Part 002: Macrostructure of bar, section, forging stock and forgings49.025.30TitanTitaniumICS:Ta slovenski standard je istoveten z:EN 2954-002:2010SIST EN 2954-002:2010en01-maj-2010SIST EN 2954-002:2010SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2954-002
March 2010 ICS 49.025.30 English Version
Aerospace series - Macrostructure of titanium and titanium alloy wrought products - Part 002: Macrostructure of bar, section, forging stock and forgings
Série aérospatiale - Macrostructure de produits corroyés en titane et en alliages de titane - Partie 002: Macrostructure des barres, profilés, pièces destinées à la forge et pièces forgées
Luft- und Raumfahrt - Makrostruktur von geschmiedeten Erzeugnissen aus Titan und Titanlegierungen - Teil 002: Makrostruktur von Stangen, Profilen, Schmiedevormaterial und Schmiedestücken This European Standard was approved by CEN on 6 February 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2954-002:2010: ESIST EN 2954-002:2010
...