EN 4626-003:2008
(Main)Aerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures - 65 °C to 125 °C (cable dependent) - Flush contacts - Part 003: Adaptor for plug
Aerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures - 65 °C to 125 °C (cable dependent) - Flush contacts - Part 003: Adaptor for plug
This standard specifies the characteristics of the female adaptor for optical terminus in plug.
Luft- und Raumfahrt - Optische Rechtecksteckverbinder, Mehrfachkontakte, Einschub, Quadrax-Kontaktkammer, Durchmesser 2,5 mm Ferrule - Betriebstemperatur - 65 °C bis 125 °C (vom Kabel abhängig) - Bündige Kontakte - Teil 003: Kontaktadapter für freien Steckverbinder
Série aérospatiale - Connecteurs, optique, rectangulaire, à contacts multiples, rackables, cavité Quadrax, férule diamètre 2,5 mm - Température d’utilisation - 65 °C à 125 °C (selon câble) - Contacts affleurants - Partie 003 : Adaptateur pour fiche
Aeronavtika - Konektorji, optični, pravokotni, večkontaktni, s stojalom in ploščo, vdolbina Quadrax, s premerom kapice 2,5 mm - Delovna temperatura - 65 °C do 125 °C (odvisna od kabla) - Izravnani kontakti - 003. del: Adapter za vtič
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures - 65 °C to 125 °C (cable dependent) - Flush contacts - Part 003: Adaptor for plugSérie aérospatiale - Connecteurs, optique, rectangulaire, à contacts multiples, rackables, cavité Quadrax, férule diamètre 2,5 mm - Température d’utilisation - 65 °C à 125 °C (selon câble) - Contacts affleurants - Partie 003 : Adaptateur pour ficheLuft- und Raumfahrt - Optische Rechtecksteckverbinder, Quadrax-Kontaktkammer, Durchmesser 2,5 mm Ferrule - Betriebstemperaturen - 65 °C bis 125 °C (vom Kabel abhängig) - Bündige Kontakte - Teil 003: Kontaktadapter für freien Steckverbinder49.060Aerospace electric equipment and systemsICS:SIST EN 4626-003:2008enTa slovenski standard je istoveten z:EN 4626-003:200801-julij-2008SIST EN 4626-003:2008SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4626-003
April 2008 ICS 49.060 English Version
Aerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures - 65 °C to 125 °C (cable dependent) - Flush contacts - Part 003: Adaptor for plug
Série aérospatiale - Connecteurs, optique, rectangulaire, à contacts multiples, rackables, cavité Quadrax, férule diamètre 2,5 mm - Température d'utilisation - 65 °C à 125 °C (selon câble) - Contacts affleurants - Partie 003 : Adaptateur pour fiche
Luft- und Raumfahrt - Optische Rechtecksteckverbinder, Quadrax-Kontaktkammer, Durchmesser 2,5 mm Ferrule - Betriebstemperaturen - 65 °C bis 125 °C (vom Kabel abhängig) - Bündige Kontakte - Teil 003: Kontaktadapter für freien Steckverbinder This European Standard was approved by CEN on 28 December 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4626-003:2008: E
EN 4626-003:2008 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Required characteristics.4 4.1 Dimensions and masses.4 4.2 Optical, mechanical and climatic characteristics.5 4.3 Material.5 4.3.1 Body.5 4.3.2 Alignment sleeve.6 5 Designation.6
EN 4626-003:2008 (E) 3 Foreword This document (EN 4626-003:2008) has been prepared by the
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.