iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12428:2000

(Main)

Industrial, commercial and garage doors and gates - Thermal transmittance - Requirements for the calculation

Industrial, commercial and garage doors and gates - Thermal transmittance - Requirements for the calculation

1.1 General This European Standard specifies the calculation requirements for the thermal transmittance for doors in a closed position.
The doors are intended for installation in areas in the reach of people, for which the main intended uses are giving safe access for goods, vehicles and persons in industrial, commer-cial or residential premises. The doors may be manually or power operated. This document applies to all doors provided in accordance with prEN 13241:1998. 1.2 Exclusions It does not apply to: - lock gates and dock gates;
- doors on lifts; - doors on vehicles; - armoured doors; - doors mainly for the retention of animals; - theatre textile curtains; - horizontally moving doors less than 2,5 m wide and 6,25 m² area, designed principally for pedestrian use; - revolving doors of any size; - doors outside the reach of people (such as crane gantry fences); - railway barriers; - barriers used solely for vehicles.

Tore - Wärmedurchgangskoeffizient - Anforderungen an die Berechnung

1.1 Allgemeines In dieser Norm werden die Anforderungen an die Berechnung für den Wärmedurchgangskoeffizienten für Tore in
geschlossenem Zustand festgelegt. Die Tore sind für den Einbau in Zugangsbereichen von Personen vorgesehen, wobei deren Hauptaufgaben darin bestehen, für Waren- und Fahrzeugverkehr sichere Zufahrt und Personen sicheren Zutritt zu Industrie-, Gewerbe-oder Wohnanlagen zu ermöglichen. Die Tore dürfen hand- oder kraftbetätigt sein. Diese Norm gilt für alle Tore nach prEN 13241:1998. 1.2 Ausnahmen Sie gilt nicht für: - Schleusentore und Docktore; - Türen in Aufzügen; - Türen in Fahrzeugen; - gepanzerte Türen; - Tore, die hauptsächlich zum Zurückhalten von Tieren vorgesehen sind; - textile Theatervorhänge; - horizontal bewegbare Tore mit einer Breite von weniger als 2,5 m und einer Fläche von weniger als 6,25 m², die hauptsächlich für die Benutzung durch Fußgänger ausgelegt sind; - Drehtüren von beliebiger Größe; - Tore außerhalb der Reichweite von Personen (wie z. B. Schutzgitter für Portalkräne);
- Eisenbahnschranken; - ausschließlich für den Fahrzeugverkehr verwendete Schranken.

Portes équipant les locaux industriels, commerciaux et les garages - Transmission thermique - Exigences pour les calculs

1.1 Généralité La présente norme européenne spécifie les prescriptions de calcul du coefficient de transmission thermique des portes en position fermée. Les portes sont destinées à être installées dans des zones accessibles aux personnes dont l'utilisation principale prévue est de donner un accès sans danger aux marchandises, aux véhicules et aux personnes dans des locaux industriels, commerciaux ou résidentiels. Les portes peuvent être manoeuvrées manuellement ou motorisées. Le présent document s'applique à toutes les portes prévues conformément au prEN 13241:1998. 1.2 Exclusions Elle ne s'applique pas : - aux portails fermés à clé et aux grilles d'entrée de docks ; - aux portes d'ascenseurs ; - aux portes de véhicules ; - aux portes blindées ; - aux portes principalement utilisées pour la retenue des animaux ; - aux rideaux en tissu de théâtres ; - aux portes manoeuvrées horizontalement ayant une largeur inférieure à 2,5 m et une surface inférieure à 6,25 m² principalement destinées à l'usage des piétons ; - aux portes tambours quelles que soient leurs dimensions ;
- aux portes hors d'atteinte des personnes (comme les barrières sur les portiques de grue) ; - aux barrières de passages à niveau ; - aux barrières exclusivement destinées à la circulation automobile.

Vrata v industrijske in javne prostore ter garažna vrata - Toplotna prehodnost - Zahteve za izračun

General Information

Status
Withdrawn
Publication Date
18-Jul-2000
Withdrawal Date
29-Jan-2013
ICS
91.060.50 - Doors and windows
Technical Committee
CEN/TC 33 - Doors, windows, shutters and building hardware
Drafting Committee
CEN/TC 33/WG 5 - Industrial, commercial and garage doors and gates
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
30-Jan-2013
Completion Date
30-Jan-2013
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Ref Project
SIST EN 12428:2001 - Industrial, commercial and garage doors and gates - Thermal transmittance - Requirements for the calculation

Relations

Replaced By
EN 12428:2013 - Industrial, commercial and garage doors - Thermal transmittance - Requirements for the calculation
Effective Date
02-Oct-2010

Buy Standard

EN 12428:2001EN 12428:2001
PreviousNext
Standard
EN 12428:2001
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Tore - Wärmedurchgangskoeffizient - Anforderungen an die BerechnungPortes équipant les locaux industriels, commerciaux et les garages - Transmission thermique - Exigences pour les calculsIndustrial, commercial and garage doors and gates - Thermal transmitt
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 16005:2023+A1:2024(Main + Amendment)
Power operated pedestrian doorsets - Safety in use - Requirements and test methods
SIST EN 16005:2024+A1:2024

This document specifies requirements regarding design and test methods for power operated pedestrian doorsets. Examples of how the doorset constructions may be operated include: electro-mechanically, electro-hydraulically, electro-magnetically or pneumatically.
This document covers safety in use of power operated pedestrian doorsets used for normal access as well as in emergency and escape routes and as fire resistance and/or smoke control doorsets.
The type of doorsets covered include power operated pedestrian sliding, swing and revolving doorsets, including balanced doorsets and folding doorsets with a horizontally moving door leaf.
This document deals with all significant hazards, hazardous situations and events relevant to power operated doorsets when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
All lifetime phases of the power operated pedestrian doorsets including transportation, assembly, dismantling, disabling and scrapping are considered by this document.
This document does not apply to:
-   vertically moving doors;
-   doors on lifts;
-   doors on vehicles;
-   power operated doors or gates mainly intended for vehicular traffic or access for goods;
-   doors used in industrial processes;
-   partition walls;
-   doors outside the reach of people (such as crane gantry fences);
-   turnstiles;
-   platform doors;
-   traffic barriers.
This document does not cover special functions of doorsets, such as security in banks, airports, etc. or fire and/or smoke compartmentation, where conformity of the specific function with requirements of the application is the preference.
This document does not deal with any specific requirements on noise emitted from power operated pedestrian doorsets as their noise emission is not considered to be a relevant hazard.
NOTE   Noise emission of power operated pedestrian doorsets is not a significant hazard for the users of these products. It is a comfort aspect.
This document is not applicable to power operated pedestrian doorsets manufactured before the date of its publication.
This document does not cover operation in environments where there is a risk of explosion.

  • Standard
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13049:2023(Main)
Windows and doors - Soft and heavy body impact - Test method, safety requirements and classification
SIST EN 13049:2023

This document specifies the test method, safety requirements and classification when determining the effect on a complete window or pedestrian doorset impacted with a soft and heavy body. Any secondary moving sashes, casements, leaves, mullions, transoms, T-connectors or fixed lights which can be mounted internally to the main casements or sashes, are intended to also be similarly tested and evaluated for the classification for the complete product.
The test applies to all types of infill of whatever materials including glass. It is not intended to classify the strength of the glass when used as an infill. It is intended to assess the interactions between all components of a window with particular regard to safety in use. It is also applicable to assess the ability of a doorset to keep in place glazed parts.
NOTE 1   The test method is aimed for glazed pedestrian doorsets with injury risk, but can also be used for other types of pedestrian doorsets if requested by the client.
NOTE 2   The test has been devised to suit all window or pedestrian doorset types, configurations and materials.
NOTE 3   For the classification of glass see EN 12600.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14024:2023(Main)
Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment
SIST EN 14024:2023

This document specifies requirements for assessment of the mechanical strength of metal profiles incorporating a thermal barrier having mechanical performance depending on their intended use.
It also specifies the tests to determine the characteristic values of mechanical properties of the thermal barrier profile and to assess the effect of different conditionings of the thermal barrier on the mechanical performance of the connection.
This document does not apply to thermal barriers which do not give a contribution to the mechanical resistance of the profiles.
This document is applicable to thermal barrier profiles designed mainly for windows, doors, screens and curtain walls.
This document does not apply to thermal barriers made only of metal profiles connected with metal pins or screws.
This current edition of EN 14024 will supersede EN 14024:2004. Differences in test procedures between the two versions will not lead to significant differences in test results. Therefore, existing test results according to EN 14024:2004 are considered as equivalent to new test results according to the current edition of EN 14024.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12453:2017+A1:2021(Main + Amendment)
Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements and test methods
SIST EN 12453:2017+A1:2022

This European Standard specifies requirements and test methods for the safety in use of power operated door, gate and barrier, intended for installation in areas in the reach of persons, and for which the main intended use is  giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises.
This European Standard also covers power operated vertically moving commercial doors such as rolling shutters and rolling grilles, used in retail premises which are mainly provided for goods protection.
This European Standard deals with all significant hazards, hazardous situations and events relevant to the power operation of industrial, commercial and garage doors, and gates when they are used as intended and under conditions of misuse which are reasonably foreseeable as identified in Clause 4.
All lifetime phases of the machinery including transportation, assembly, dismantling, disabling and scrapping are considered by this standard.
This European Standard does not apply to
-   lock gates and dock gates;
-   doors on lifts;
-   doors on vehicles;
-   armoured doors;
-   doors mainly for the retention of animals, unless they are at the site perimeter ;
-   theatre textile curtains;
-   horizontally moving power operated doors mainly intended for pedestrian use;
-   doors outside the reach of people (such as crane gantry fences);
-   railway barriers;
-   barriers intended solely for use by pedestrians;
-   barriers used solely for vehicles on motorways.
Whenever the term "door" is used in this document, it shall be deemed to cover the full scope of types and variances of doors, gates and barriers in the scope of this Standard.
This European Standard does not deal with any specific requirements on noise emitted from power operated door, gate and barrier, intended for installation in areas in the reach of persons, and for which the main intended use is giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises as their noise emission is not considered to be a relevant hazard.
NOTE   Noise emission of power operated doors is not a significant hazard for the users of these products. It is a comfort aspect.
This European Standard is not applicable to machinery which are manufactured before the date of publication of the standard.

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1529:2021(Main)
Door leaves - Height, width, thickness and squareness - Tolerance classes
SIST EN 1529:2022

This document gives the tolerance limits for specified dimensions of height, width and thickness, and for squareness of door leaves. It applies to door leaves which are supplied without, and independent of, any frames. It does not apply to the leaves of doorsets.
NOTE   Compliance with the tolerance limits given in this document does not imply that this would necessarily produce a perfect fit between door leaves and frames

  • Standard
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1628:2021(Main)
Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under static loading
SIST EN 1628:2021

This document specifies a test method for the determination of resistance to static loading in order to assess the burglar resistant properties of pedestrian doorsets, windows, curtain walling, grilles and shutters. It is applicable to the following opening functions: Turning, tilting, folding, turn-tilting, top or bottom hung, sliding (horizontally and vertically), pivoted (horizontally and vertically), projecting, and rolling as well as non-openable constructions.
It is acknowledged that there are two aspects to the burglar resistance performance of construction products, their normal resistance to forced operation and their ability to remain fixed to the building. This test method does not evaluate the performance of the fixing to the building.
The manufacturer's installation instructions will give guidance on the fixing of the product.
An example for the contents of the manufacturer’s installation instructions is given in EN 1627:2021, Annex A.
This document does not apply to walls and roofs, as well as for doors, gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises, as covered by EN 13241:2003+A2:2016.
NOTE It is important that construction products that can be reached or driven through by vehicles are protected by appropriate measures such as barriers, extensible ramps, etc.

  • Standard
    88 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1627:2021(Main)
Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Requirements and classification
SIST EN 1627:2021

This document specifies requirements and classification systems for burglar resistant characteristics of pedestrian doorsets, windows, curtain walling, grilles and shutters. It is applicable to the following opening functions: Turning, tilting, folding, turn-tilting, top or bottom hung, sliding (horizontally and vertically), pivoted (horizontally and vertically), projecting and rolling as well as non-openable constructions. It also covers products that include items such as letter plates or ventilation grilles. It specifies requirements for the burglar resistance of a construction product (as defined in 3.1 of this document).
NOTE 1 The elements of curtain walling will be assigned to group 1 to 4 product depending on their design.
This document does not directly cover the resistance of locks and cylinders to attack with picking tools. Building hardware are components of the above mentioned products and cannot be classified as such according to this document.
This document does not apply to walls and roofs, as well as for doors, gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises, as covered by EN 13241:2003+A2:2016.
NOTE 2 It is important that construction products that can be reached or driven through by vehicles are protected by appropriate measures such as barriers, extensible ramps, etc.
The requirements to an electronic security system (e.g. access control system) to control electromechanical locks and strikes according to EN 14846:2008 are not in the scope of this document.
NOTE 3 Locks and striking plates according to EN 14846:2008 needs an access control system for authorized and secure access (comparable to a lock cylinder). The transmission of the signal between the lock and the access control system (e.g. wiring) needs also consideration. (The signal is transmitted in encrypted form or is not accessible during the manual attack attempt.) Upcoming revisions of this document might include such a reference.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1629:2021(Main)
Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under dynamic loading
SIST EN 1629:2021

This document specifies a test method for the determination of resistance to dynamic loading in order to assess the burglar resistant properties of pedestrian doorsets, windows, curtain walling, grilles and shutters. It is applicable to the following opening functions: turning, tilting, folding, turn-tilting, top or bottom hung, sliding (horizontally and vertically), projecting, pivoted (horizontally and vertically) and rolling as well as non-openable constructions.
It is acknowledged that there are two aspects to the burglar resistance performance of construction products, their normal resistance to forced operation and their ability to remain fixed to the building. This test method does not evaluate the performance of the fixing to the building.
The manufacturer's installation instructions will give guidance on the fixing of the product.
An example for the contents of the manufacturer's installation instructions is given in EN 1627:2021, Annex A.
This document does not apply to walls and roofs, as well as for doors, gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises, as covered by EN 13241:2003+A2:2016.
NOTE It is important that construction products that can be reached or driven through by vehicles are protected by appropriate measures such as barriers, extensible ramps, etc.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1630:2021(Main)
Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance to manual burglary attempts
SIST EN 1630:2021

This document specifies a test method for the determination of resistance to manual burglary attempts in order to assess the burglar resistant characteristics of pedestrian doorsets, windows, curtain walling, grilles and shutters. It is applicable to the following opening functions: turning, tilting, folding, turn-tilting, top or bottom hung, sliding (horizontally and vertically), pivoted (horizontally and vertically), projecting, and rolling as well as non-openable constructions.
This document does not directly cover the resistance of locks and cylinders to attack with picking tools. It also does not cover the attack of electric, electronic and electromagnetic operated burglar resistant construction products using surreptitious attack methods that might defeat these characteristics.
It is acknowledged that there are two aspects to the burglar resistance performance of construction products, their normal resistance to forced operation and their ability to remain fixed to the building. This test method does not evaluate the performance of the fixing to the building.
The manufacturer's installation instructions will give guidance on the fixing of the product.
An example for the contents of the manufacturer’s installation instructions is given in EN 1627:2021, Annex A.
This document does not apply to walls and roofs, as well as for doors, gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises, as covered by EN 13241:2003+A2:2016.
NOTE It is important that construction products that can be reached or driven through by vehicles are protected by appropriate measures such as barriers, extensible ramps, etc.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17372:2021(Main)
Power operated pedestrian swing door drives with self closing function - Requirements and test methods
SIST EN 17372:2021

This document is applicable to power-operated pedestrian swing door drives with self closing function using mechanically stored energy for single and double leaf swing doorsets with or without fire resistance and smoke control characteristics. It defines requirements and test methods for the self-closing function.
This document does not apply to:
- electrically controlled hold-open systems according to EN 14637;
- door coordinating devices according to EN 1158;
- electrically powered hold-open devices for swing doors according to EN 1155.
Requirements and test methods for hold-open systems are not part of this document.
Additional requirements and test methods for the use of power-operated pedestrian swing door drives with self closing function on double-leaf swing doors are described in EN 1158 and are therefore not part of this document.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day