iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 13924-2:2014

(Main)

Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 2: Multigrade paving grade bitumens

Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 2: Multigrade paving grade bitumens

This document provides a framework for specifying the properties and relevant test methods for multigrade paving grade bitumens which are suitable for use in the construction and maintenance of roads, airfields and other paved areas, together with information for attestation and verification of constancy of performance. Multigrade paving grade bitumens are designated in EN 12597:2000 as special bitumens for road applications having a positive penetration index (Ip).
This document does not directly address cohesion, adhesion and settling ability, (see Clause Introduction).

Bitumen und bitumenhaltige Bindemittel - Anforderungsrahmenwerk für spezielle Straßenbaubitumen - Teil 2: Multigrade Straßenbaubitumen

Dieses Dokument legt ein Rahmenwerk für die Spezifizierung der Eigenschaften und entsprechenden Prüfverfahren für multigrade Straßenbaubitumen fest, die für die Verwendung beim Bau und der Instandhaltung von Straßen, Flugplätzen und sonstigen befestigten Flächen geeignet sind, sowie Informationen für die Bewertung und Überprüfung der Leistungsbeständigkeit. Multigrade Straßenbaubitumen werden in EN 12597:2000 als spezielle Bitumen mit positivem Penetrationsindex (Ip) für Anwendungen im Straßenbau bezeichnet.
Die Eigenschaften Kohäsion, Adhäsion und Absetzverhalten werden in diesem Dokument nicht direkt angesprochen (siehe Abschnitt Einleitung).

Bitumes et liants bitumineux - Cadre de spécifications pour les bitumes routiers spéciaux - Partie 2: Bitumes routiers multigrades

Le présent document prescrit un cadre de spécifications des caractéristiques et des méthodes d'essai correspondant aux bitumes routiers multigrades destinés à la construction et à l’entretien des chaussées, des pistes d’aéroport et d’autres chaussées, et fournit des informations sur l'attestation et la vérification de la constance de la performance. Les bitumes routiers multigrades sont désignés dans l'EN 12597:2000 en tant que bitumes spéciaux pour applications routières ayant un indice de pénétrabilité positif (Ip).
Le présent document ne couvre pas directement la cohésion, l’adhésion et l’aptitude au durcissement (voir Article Introduction).

Bitumen in bitumenska veziva - Okvirna specifikacija za posebne cestogradbene bitumne - 2. del: "Multigrade" cestogradbeni bitumni

EN 13924-2 zagotavlja okvir za določanje lastnosti in ustreznih preskusnih metod za „multigrade“ cestogradbene bitumne, ki so primerni za gradnjo in vzdrževanje cest, letališč in drugih asfaltnih površin, skupaj z informacijami za potrjevanje in preverjanje nespremenljivosti lastnosti. EN 12597:2000 „Multigrade“ cestogradbene bitumne določa kot posebne cestogradbene bitumne za uporabo na cestah s pozitivnim indeksom penetracije (IP). Ta dokument neposredno ne navaja kohezije, adhezije in odpornosti proti otrjevanju (glej Uvod točke).

General Information

Status
Published
Publication Date
25-Mar-2014
ICS
75.140 - Waxes, bituminous materials and other petroleum products
91.100.50 - Binders. Sealing materials
Technical Committee
CEN/TC 336 - Bituminous binders
Drafting Committee
CEN/TC 336/WG 1 - Bituminous binders for paving
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
13-Nov-2019
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/124 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on road construction products
Ref Project
SIST EN 13924-2:2014 - Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 2: Multigrade paving grade bitumens

Buy Standard

EN 13924-2:2014EN 13924-2:2014
PreviousNext
Standard
EN 13924-2:2014
English language
29 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bitumen in bitumenska veziva - Okvirna specifikacija za posebne cestogradbene bitumne - 2. del: "Multigrade" cestogradbeni bitumniBitumen und bitumenhaltige Bindemittel - Anforderungsrahmenwerk für spezielle Straßenbaubitumen - Teil 2: Multigrade StraßenbaubitumenBitumes et liants bitumineux - Cadre de spécifications pour les bitumes routiers spéciaux - Partie 2: Bitumes routiers multigradesBitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 2: Multigrade paving grade bitumens91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:EN 13924-2:2014SIST EN 13924-2:2014en,fr,de01-julij-2014SIST EN 13924-2:2014SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13924-2
March 2014 ICS 75.140; 91.100.50 English Version
Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 2: Multigrade paving grade bitumens
Bitumes et liants bitumineux - Cadre de spécifications pour les bitumes routiers spéciaux - Partie 2: Bitumes routiers multigrades
Bitumen und bitumenhaltige Bindemittel - Anforderungsrahmenwerk für spezielle Straßenbaubitumen - Teil 2: Multigrade Straßenbaubitumen This European Standard was approved by CEN on 4 February 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13924-2:2014 ESIST EN 13924-2:2014

Foreword .3 Introduction .4 1 Scope .5 2 Normative references .5 3 Terms and definitions .5 4 Sampling .6 5 Requirements and test methods .6 5.1 General .6 5.2 Properties and related test methods .6 5.2.1 General .6 5.2.2 Consistency at intermediate service temperature .6 5.2.3 Consistency at elevated service temperature .6 5.2.4 Temperature dependence of consistency .6 5.2.5 Brittleness at low service temperature .6 5.2.6 Durability – Resistance to hardening .7 5.2.7 Temperature dependency of mixing .7 5.2.8 Other properties .7 5.2.9 Informative properties .7 5.3 Release of regulated dangerous substances .7 5.4 Precision .7 6 Assessment and verification of constancy of performance - AVCP .9 6.1 General .9 6.2 Type testing .9 6.2.1 General .9 6.2.2 Test samples, testing and compliance criteria . 10 6.2.3 Test reports . 10 6.2.4 Shared other party results . 10 6.3 Factory production control (FPC) . 11 6.3.1 General . 11 6.3.2 Requirements . 11 6.3.3 Initial inspection of factory and of FPC . 14 6.3.4 Continuous surveillance of FPC . 14 6.3.5 Procedure for modifications . 15 6.3.6 One-off products, pre-production products (e.g. prototypes) and products produced in very low quantity. 15 Annex A (normative)
Calculation of the penetration index, Ip . 17 Annex B (normative)
Informative properties . 19 Annex ZA (informative)
Clauses of this European Standard addressing
the provisions of the EC Construction Products Regulation . 20 ZA.1 Scope and relevant characteristics . 20 ZA.2 Procedure for AVCP of multigrade paving grade bitumens . 21 ZA.2.1 System of attestation of conformity . 21 ZA.2.2 Declaration of performance (DoP) . 22 ZA.2.2.1 General . 22 ZA.2.2.2 Content . 23 ZA.2.2.3 Example of DoP . 24 ZA.3 CE marking and labelling . 25 Bibliography . 29 SIST EN 13924-2:2014

NOTE Industrial applications are not covered by mandate M/124. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 13924-2:2014
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 12597:2024(Main)
Bitumens and bituminous binders - Terminology
SIST EN 12597:2024

This European Standard defines terms for paving or industrial bitumen of various types and binders derived from bitumen.
This European Standard is intended to cover materials only within the scope of CEN/TC 336, i.e. only bitumens and bituminous binders. It should consequently not extend to non-petroleum "hydrocarbon" binders such as coal tar and its derivatives or to natural asphalts. However, some definitions are given for some excluded materials and related terms. The corresponding terms were introduced only when they appeared in a definition of a product or process and when their definition was found necessary for understanding or for avoiding any ambiguity.

  • Draft
    24 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12594:2024(Main)
Bitumens and bituminous binders - Preparation of test samples
SIST EN 12594:2024

This document specifies methods for preparing test samples of bitumens and bituminous binders in order to test their properties.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16346:2023(Main)
Bitumen and bituminous binders - Determination of breaking behaviour and immediate adhesivity of cationic bituminous emulsions
SIST EN 16346:2024

This document specifies a method for the determination of the breaking and immediate adhesivity behaviour of cationic bituminous emulsions in contact with aggregate. The method applies to emulsions used for surface dressing and similar applications and can be used for formulation as well as for production control purposes.
WARNING — The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12595:2023(Main)
Bitumen and bituminous binders - Determination of kinematic viscosity
SIST EN 12595:2023

This document specifies a method for the determination of the kinematic viscosity of bituminous binders at 60 °C and 135 °C, in a range from 6 mm2/s to 300 000 mm2/s. Other temperatures are possible if calibration constants are known. Bituminous emulsions are not covered within the scope of this method.
Results for this method can be used to calculate dynamic viscosity when the density of the test material is known or can be determined.
NOTE   This document assumes Newtonian behaviour of the sample at test conditions.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to identify the hazards and assess the risks involved in performing this test method and to implement sufficient control measures to protect individual operators (and the environment). This includes appropriate safety and health practices and determination of the applicability of regulatory limitations prior to use.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12596:2023(Main)
Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary
SIST EN 12596:2023

This document specifies a method for the determination of the dynamic viscosity of bituminous binders by means of a vacuum capillary viscometer at 60 °C in a range between 0,003 6 Pa⋅s and 580 000 Pa⋅s. Other temperatures are possible if calibration constants are known. Bituminous emulsions and non-newtonian binders (e.g. some polymer modified bitumen) are not within the scope of this method.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to identify the hazards and assess the risks involved in performing this test method and to implement sufficient control measures to protect individual operators (and the environment). This includes appropriate safety and health practices and determination of the applicability of regulatory limitations prior to use.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14771:2023(Main)
Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR)
SIST EN 14771:2023

This document specifies a method for the determination of the flexural creep stiffness of bitumen and bituminous binders in the range of 30 MPa to 1 GPa by means of the bending beam rheometer.
The method can be applied to a variety of bitumens, including unmodified as well as modified binders, as fresh (unused) binders, as well as binders after laboratory ageing conditioning (e.g. EN 12607-1, EN 14769), and also binders that have been recovered from asphalt mixtures.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14769:2023(Main)
Bitumen and bituminous binders - Accelerated long-term ageing conditioning by a Pressure Ageing Vessel (PAV)
SIST EN 14769:2023

This document specifies an accelerated long-term ageing/conditioning procedure for bituminous binders. The procedure involves ageing trays of binder at elevated temperatures under pressurized conditions in a pressure ageing vessel (PAV).
NOTE   For binders to be used in hot and warm asphalt applications, the pre-conditioning of the sample can be performed using one of the methods in the EN 12607 series. For binders to be used in bituminous emulsion and cut back or fluxed applications, the stabilization of the sample is such that there are no volatiles remaining.
WARNING - The use of this document can involve hazardous materials, operations and equipment, in particular, the use of a high pressure ageing vessel. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate health and safety practices and determine the applicability of regulatory limitations prior to use. If there is the likelihood of volatile components being present in a binder, this procedure is not used.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14770:2023(Main)
Bitumen and bituminous binders - Determination of complex shear modulus and phase angle - Dynamic Shear Rheometer (DSR)
SIST EN 14770:2023

This document specifies a general method of using a dynamic shear rheometer (DSR) for measuring the rheological properties of bituminous binders. The procedure involves determining the complex shear modulus and phase angle of binders over a range of test frequencies and test temperatures when tested in oscillatory shear.
From the test, the complex shear modulus, |G*|, and its phase angle, δ, at a given temperature and frequency are calculated, as well as the components G' and G" of the complex shear modulus.
This method is applicable to un-aged, aged, stabilized and recovered bituminous binders. The test procedure in accordance with this document is not applicable for bituminous binders with particles larger than 250 μm (e.g. filler material, granulated rubber).
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12850:2022(Main)
Bitumen and bituminous binders - Determination of the pH value of bituminous emulsions
SIST EN 12850:2022

This document specifies a method for measuring the pH value of bituminous emulsions.
It is applicable to anionic, cationic bituminous emulsions and bituminous emulsions prepared by means of non-ionic surfactant.
NOTE   In certain circumstances, the pH value can provide an indication of the ionic character of a bituminous emulsion when confirmed by a particle polarity test conforming to EN 1430 [1].
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17643:2022(Main)
Bitumen and bituminous binders - Determination of equi-shear modulus temperature and phase angle using a Dynamic Shear Rheometer (DSR) - BTSV test
SIST EN 17643:2022

This document specifies the Binder Fast Characterization Test (for short: BTSV test, German: Bitumen-Typisierungs-Schnell-Verfahren). The test is conducted using a Dynamic Shear Rheometer (DSR). It is used to characterize bitumen and bituminous binders and to assess the deformation behaviour at high service temperatures.
The test procedure described in this document covers the testing of paving grade bitumen or modified bitumen, as fresh (unused) binders, as well as binders after laboratory ageing conditioning (e.g. EN 12607-1, EN 14769), and also binders that have been recovered from asphalt mixtures. The test procedure in accordance with this document is not applicable for bituminous binders with particles larger than 250 μm (e.g. filler material, granulated rubber).
NOTE   The test procedure has not been applied on bituminous binders recovered from bitumen emulsions yet.
The test determines the temperature and the associated phase angle at which a bituminous binder exhibits a defined complex shear modulus in stress-controlled oscillation mode at constant frequency and with continuous increase of the test temperature.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to ensure that regulatory requirements are fulfilled prior to application of this document. This document involves handling of apparatus and binders at very high temperatures. Always wear protective gloves and eyewear when handling hot binders, and avoid contact with any exposed, unprotected skin.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day