FprEN 4882

Aerospace series - Steel X5CrNiCu 17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Sheets and strips - a ≤ 6 mm - Rm ≥ 1 070 MPa

This document specifies the requirements relating to:
Steel X5CrNiCu 17 4 (1.4542)
Air melted
Solution treated and precipitation treated
Sheets and strips
a ≤ 6 mm
Rm ≥ 1 070 MPa
for aerospace applications.
Material no (W.nr): 1.4542.
The ASD STAN designation of this material is FE PM3801.

Luft- und Raumfahrt - Stahl X5CrNiCu 17-4 (1.4542) - Lufterschmolzen - Lösungsgeglüht und ausscheidungsgehärtet - Bleche und Bänder - a ≤ 6 mm - Rm ≥ 1 070 MPa

Série aérospatiale - Acier X5CrNiCu 17-4 (1.4542) - Élaboré à l'air - Mis en solution et précipité - Tôles et bandes - a ≤ 6 mm - Rm ≥ 1 070 MPa

Le présent document spécifie les exigences relatives à :
Acier X5CrNiCu 17 4 (1.4542)
Élaboré à l’air
Mis en solution et précipité
Tôles et bandes
a ≤ 6 mm
Rm ≥ 1 070 MPa
pour les applications aérospatiales.
No de matériau (W.nr) : 1.4542.
La désignation ASD STAN du présent matériau est FE PM3801.

Aeronavtika - Jeklo X5CrNiCu 17-4 (1.4542) - Taljeno - Topilno žarjena in izločevalno utrjena - Pločevina in trakovi - a ≤ 6 mm - Rm ≥ 1070 MPa

General Information

• Status: Not Published
• ICS: 49.025.10 - Steels
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4/S 3 - Steels & Heat Resisting Alloys
• Ref Project: kSIST FprEN 4882:2022 - Aerospace series - Steel X5CrNiCu 17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Sheets and strips - a ≤ 6 mm - Rm ≥ 1 070 MPa

Standards Content (sample)

SLOVENSKI STANDARD
oSIST prEN 4882:2021
01-julij-2021
Aeronavtika - Jeklo X5CrNiCu 17-4 (1.4542) - Taljeno - Topilno žarjena in
izločevalno utrjena - Pločevina in trakovi - a ≤ 6 mm - Rm ≥ 1070 MPa

Aerospace series - Steel X5CrNiCu 17-4 (1.4542) - Air melted - Solution treated and

precipitation treated - Sheets and strips - a ≤ 6 mm - Rm ≥ 1 070 MPa

Luft- und Raumfahrt - Stahl X5CrNiCu 17-4 (1.4542) - Lufterschmolzen - Lösungsgeglüht

und ausgelagert -Bleche und Bänder - a ≤ 6 mm - Rm ≥ 1 070 MPa

Série aérospatiale - Acier X5CrNiCu 17-4 (1.4542) - Élaboré à l'air - Mis en solution et

précipité - Tôles et bandes - a ≤ 6 mm - Rm ≥ 1 070 MPa
Ta slovenski standard je istoveten z: prEN 4882
ICS:
49.025.10 Jekla Steels
77.140.50 Ploščati jekleni izdelki in Flat steel products and semi-
polizdelki products
oSIST prEN 4882:2021 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 4882:2021
---------------------- Page: 2 ----------------------
oSIST prEN 4882:2021
DRAFT
EUROPEAN STANDARD
prEN 4882
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2021
ICS 49.025.10
English Version
Aerospace series - Steel X5CrNiCu 17-4 (1.4542) - Air
melted - Solution treated and precipitation treated - Sheets
and strips - a ≤ 6 mm - Rm ≥ 1 070 MPa

Série aérospatiale - Acier X5CrNiCu 17-4 (1.4542) - Luft- und Raumfahrt - Stahl X5CrNiCu 17-4 (1.4542) -

Élaboré à l'air - Mis en solution et précipité - Tôles et Lufterschmolzen - Lösungsgeglüht und ausgelagert -

bandes - a ≤ 6 mm - Rm ≥ 1 070 MPa Bleche und Bänder - a ≤ 6 mm - Rm ≥ 1 070 MPa

This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-

STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations

which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4882:2021 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 4882:2021
prEN 4882:2021 (E)
Contents Page

European foreword ............................................................................................................................................ 3

Introduction .......................................................................................................................................................... 4

1 Scope .......................................................................................................................................................... 5

2 Normative references .......................................................................................................................... 5

3 Terms and definitions ......................................................................................................................... 5

4 Requirements ......................................................................................................................................... 5

Bibliography ......................................................................................................................................................... 9

---------------------- Page: 4 ----------------------
oSIST prEN 4882:2021
prEN 4882:2021 (E)
European foreword

This document (prEN 4882:2021) has been prepared by the Aerospace and Defence Industries

Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried ou
...