Aerospace series - Steel FE-PM1503 (X3CrNiMoAl 13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D ≤ 150 mm - Rm ≥ 1 400 MPa

This document specifies the requirements relating to:
Steel FE-PM1503 (X3CrNiMoAl 13-8-2)
Vacuum induction melted and consumable electrode remelted
Solution treated and precipitation treated
Bar for machining
a or D ≤ 150 mm
Rm ≥ 1 400 MPa
for aerospace applications.

Luft- und Raumfahrt - Stahl FE-PM1503 (X3CrNiMoAl 13-8-2) - Vakuuminduktionserschmolzen und mit selbstverzehrender Elektrode umgeschmolzen - Lösungsgeglüht und ausscheidungsgehärtet - Stange zur spanenden Bearbeitung - a oder D ≤ 150 mm - Rm ≥ 1 400 MPa

Dieses Dokument legt die Anforderungen an:
Stahl FE-PM1503 (X3CrNiMoAl 13-8-2)
Vakuuminduktionserschmolzen und mit selbstverzehrender Elektrode umgeschmolzen
Lösungsgeglüht und ausscheidungsgehärtet
Stange zur spanenden Bearbeitung
a oder D ≤ 150 mm
Rm ≥ 1 400 MPa
für Anwendungen in der Luft- und Raumfahrt fest.

Série aérospatiale - Acier FE-PM1503 (X3CrNiMoAl 13-8-2) - Élaboré sous vide par induction et refondu à l'électrode consommable - Mis en solution et précipité - Barre pour usinage - a ou D ≤ 150 mm - Rm ≥ 1 400 MPa

Le présent document spécifie les exigences relatives à :
Acier FE-PM1503 (X3CrNiMoAl 13-8-2)
Élaboré sous vide par induction et refondu à l'électrode consommable
Mis en solution et précipité
Barre pour usinage
a ou D ≤ 150 mm
Rm ≥ 1 400 MPa
pour applications aérospatiales.

Aeronavtika - Jeklo FE-PM1503 (X3CrNiMoAl 13-8-2) - Indukcijsko taljeno v vakuumu in pretaljeno s taljivo elektrodo - Topilno žarjeno in izločevalno utrjeno - Palice za obdelavo - a ali D ≤ 150 mm - Rm ≥ 1400 MPa

Ta standard določa zahteve, ki se navezujejo na: jeklo FE-PM1503 (X3CrNiMoAl 13-8-2), indukcijsko taljeno v vakuumu in pretaljeno s taljivo elektrodo, topilno žarjeno in izločevalno utrjeno, palice za obdelavo – a ali D ≤ 150 mm, Rm ≥ 1400 MPa.

General Information

Status
Published
Publication Date
14-Jan-2020
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
15-Jan-2020
Completion Date
15-Jan-2020

Buy Standard

Standard
EN 3358:2020
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 3358:2020
01-marec-2020
Aeronavtika - Jeklo FE-PM1503 (X3CrNiMoAl 13-8-2) - Indukcijsko taljeno v

vakuumu in pretaljeno s taljivo elektrodo - Topilno žarjeno in izločevalno utrjeno -

Palice za obdelavo - a ali D ≤ 150 mm - Rm ≥ 1400 MPa
Aerospace series - Steel FE-PM1503 (X3CrNiMoAl 13-8-2) - Vacuum induction melted

and consumable electrode remelted - Solution treated and precipitation treated - Bar for

machining - a or D ≤ 150 mm - Rm ≥ 1 400 MPa
Luft- und Raumfahrt - Stahl FE-PM1503 (X3CrNiMoAl 13-8-2) -
Vakuuminduktionserschmolzen und mit selbstverzehrender Elektrode umgeschmolzen -

Lösungsgeglüht und ausgelagert - Stangen zur Spanenden Bearbeitung - a oder D ≤ 150

mm - Rm ≥ 1 400 MPa
Série aérospatiale - Acier FE-PM1503 (X3CrNiMoAl 13-8-2) - Élaboré sous vide par

induction et refondu à l'électrode consommable - Mis en solution et vieilli - Barres pour

usinage - a ou D ≤ 150 mm - Rm ≥ 1 400 MPa
Ta slovenski standard je istoveten z: EN 3358:2020
ICS:
49.025.10 Jekla Steels
SIST EN 3358:2020 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 3358:2020
---------------------- Page: 2 ----------------------
SIST EN 3358:2020
EN 3358
EUROPEAN STANDARD
NORME EUROPÉENNE
January 2020
EUROPÄISCHE NORM
ICS 49.025.10
English Version
Aerospace series - Steel FE-PM1503 (X3CrNiMoAl 13-8-2)
- Vacuum induction melted and consumable electrode
remelted - Solution treated and precipitation treated - Bar
for machining - a or D ≤ 150 mm - Rm ≥ 1 400 MPa

Série aérospatiale - Acier FE-PM1503 (X3CrNiMoAl 13- Luft- und Raumfahrt - Stahl FE-PM1503 (X3CrNiMoAl

8-2) - Élaboré sous vide par induction et refondu à 13-8-2) - Vakuuminduktionserschmolzen und mit

l'électrode consommable - Mis en solution et précipité - selbstverzehrender Elektrode umgeschmolzen -

Lösungsgeglüht und ausscheidungsgehärtet - Stange
Barre pour usinage - a ou D ≤ 150 mm - Rm ≥ 1 400
MPa zur spanenden Bearbeitung - a oder D ≤ 150 mm - Rm
≥ 1 400 MPa
This European Standard was approved by CEN on 14 January 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3358:2020 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 3358:2020
EN 3358:2020 (E)
Contents Page

European foreword ...................................................................................................................................................... 3

Introduction .................................................................................................................................................................... 4

1 Scope .................................................................................................................................................................... 5

2 Normative references .................................................................................................................................... 5

3 Terms and definitions ................................................................................................................................... 5

4 Requirements ................................................................................................................................................... 5

Bibliography .................................................................................................................................................................... 8

---------------------- Page: 4 ----------------------
SIST EN 3358:2020
EN 3358:2020 (E)
European foreword

This document (EN 3358:2020) has been prepared by the Aerospace and Defence Industries Association

of Europe — Standardization (ASD-STAN).

After enquiries and votes carried out in accordance with the rules of this Association, this Standard has

received the approval of the National Associations and the Official Services of the member countries of

ASD, prior to its presentation to CEN.

This document shall be given the status of a national standard, either by publication of an identical text

or by endorsement, at the latest by July 2020, and conflicting national standards shall be withdrawn at

the latest by July 2020.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

According to the CEN-CENELEC Internal Regulations, the national standards organisa

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.