Aerospace series - Steel X5CrNoMoCuNb14-5 (1.4594) - 930 MPa ≤ Rm ≤ 1 080 MPa - Forgings - De ≤ 150 mm

This document specifies the requirements relating to:
Steel X5CrNoMoCuNb14-5 (1.4594)
930 MPa ≤ Rm ≤ 1 080 MPa
Forgings
De ≤ 150 mm
for aerospace applications.
ASD-STAN designation: FE-PM66.

Luft- und Raumfahrt - Stahl X5CrNoMoCuNb14-5 (1.4594) - 930 MPa ≤ Rm ≤ 1 080 MPa - Schmiedestücke - De ≤ 150 mm

Dieses Dokument legt die Anforderungen an:
Stahl X5CrNoMoCuNb14-5 (1.4594)
930 MPa ≤ Rm ≤ 1 080 MPa
Schmiedestücke
De ≤ 150 mm
für Anwendungen in der Luft  und Raumfahrt fest.
ASD-STAN-Bezeichnung: FE-PM66.

Série aérospatiale - Acier X5CrNoMoCuNb14-5 (1.4594) - 930 MPa ≤ Rm ≤ 1 080 MPa - Pièces forgées ou matricées - De ≤ 150 mm

Le présent document spécifie les exigences relatives à :
Acier X5CrNoMoCuNb14-5 (1.4594)
930 MPa ≤ Rm ≤ 1 080 MPa
Pièces forgées ou matricées
De ≤ 150 mm
pour applications aérospatiales.
Désignation ASD-STAN : FE-PM66.

Aeronavtika - Jeklo X5CrNoMoCuNb14-5 (1.4594) - 930 MPa ≤ Rm ≤ 1080 MPa - Izkovki - De ≤ 150 mm

Ta dokument določa zahteve, ki se navezujejo na: jeklo X5CrNoMoCuNb14-5 (1.4594), 930 MPa ≤ Rm ≤ 1080 MPa, izkovki, De ≤ 150 mm, za uporabo v aeronavtiki. Oznaka ASD-STAN: FE-PM66.

General Information

Status
Published
Publication Date
03-Dec-2019
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
04-Dec-2019
Completion Date
04-Dec-2019

Buy Standard

Standard
EN 2503:2020
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 2503:2020
01-februar-2020
Aeronavtika - Jeklo X5CrNoMoCuNb14-5 (1.4594) - 930 MPa ≤ Rm ≤ 1080 MPa -
Izkovki - De ≤ 150 mm
Aerospace series - Steel X5CrNoMoCuNb14-5 (1.4594) - 930 MPa ≤ Rm ≤ 1 080 MPa -
Forgings - De ≤ 150 mm
Luft- und Raumfahrt - Stahl X5CrNoMoCuNb14-5 (1.4594) - 930 MPa ≤ Rm ≤ 1 080 MPa
- Gesenk- und Freiformschmiedestücke - De ≤ 150 mm

Série aérospatiale - Acier X5CrNoMoCuNb14-5 (1.4594) - 930 MPa ≤ Rm ≤ 1 080 MPa -

Pièces forgées ou matricées - De ≤ 150 mm
Ta slovenski standard je istoveten z: EN 2503:2019
ICS:
49.025.10 Jekla Steels
77.140.85 Železni in jekleni kovani Iron and steel forgings
izdelki
SIST EN 2503:2020 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 2503:2020
---------------------- Page: 2 ----------------------
SIST EN 2503:2020
EN 2503
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2019
EUROPÄISCHE NORM
ICS 49.025.10
English Version
Aerospace series - Steel X5CrNoMoCuNb14-5 (1.4594) -
930 MPa ≤ Rm ≤ 1 080 MPa - Forgings - De ≤ 150 mm

Série aérospatiale - Acier X5CrNoMoCuNb14-5 Luft- und Raumfahrt - Stahl X5CrNoMoCuNb14-5

(1.4594) - 930 MPa ≤ Rm ≤ 1 080 MPa - Pièces forgées (1.4594) - 930 MPa ≤ Rm ≤ 1 080 MPa - Gesenk- und

ou matricées - De ≤ 150 mm Freiformschmiedestücke - De ≤ 150 mm
This European Standard was approved by CEN on 4 February 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2503:2019 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 2503:2020
EN 2503:2019 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

Introduction ..................................................................................................................................................................... 4

1 Scope .................................................................................................................................................................... 5

2 Normative references .................................................................................................................................... 5

3 Terms and definitions .................................................................................................................................... 5

4 Requirements ................................................................................................................................................... 5

Bibliography .................................................................................................................................................................... 8

---------------------- Page: 4 ----------------------
SIST EN 2503:2020
EN 2503:2019 (E)
European foreword

This document (EN 2503:2019) has been prepared by the Aerospace and Defence Industries Association of

Europe - Standardization (ASD-STAN).

After enquiries and votes carried out in accordance with the rules of this Association, this Standard has

received the approval of the National Associations and the Official Services of the member countries of ASD,

prior to its presentation to CEN.

This document shall be given the status of a national standard, either by publication of an identical text or by

endorsement, at the latest by June 2020, and conflicting national sta
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.