Gas cylinders - Cylinder bundles - Design, manufacture, testing and inspection (ISO 10961:2010)

ISO 10961:2010 specifies the requirements for the design, construction, testing and initial inspection of a transportable cylinder bundle. It is applicable to cylinder bundles containing compressed gas, liquefied gas and mixtures thereof. It is also applicable to cylinder bundles for acetylene.
It does not apply to packages in which cylinders are manifolded together in a support frame which is designed to be fixed permanently to a road vehicle, to a railway wagon or to the ground as a customer storage vessel. It does not apply to cylinder bundles which are designed for use in extreme environmental or operational conditions when additional and extraordinary requirements are imposed to maintain safety standards, reliability and performance, e.g. offshore cylinder bundles.
Specific requirements for acetylene cylinder bundles containing acetylene in a solvent are included in an annex. ISO 10961 does not, however, cover acetylene cylinder bundles with solvent-free acetylene cylinders.
ISO 10961 is intended primarily for industrial gases other than liquefied petroleum gases (LPGs), but it may also be used for LPGs.

Gasflaschen - Flaschenbündel - Auslegung, Herstellung, Prüfung und Inspektion (ISO 10961:2010)

Diese Internationale Norm legt die Anforderungen an Auslegung, Bau, Prüfung und erstmalige Prüfung eines ortsbeweglichen Flaschenbündels fest. Sie gilt für Flaschenbündel für verdichtete Gase, verflüssigte Gase und deren Gemische. Sie gilt ebenfalls für Acetylen-Flaschenbündel.
Diese Internationale Norm gilt nicht für Einheiten, in denen die Flaschen über Sammelleitungen in einem Stützrahmen miteinander verbunden sind, der für die dauerhafte Befestigung an einem Straßenfahrzeug, einem Eisenbahnwagen oder am Boden als Lagerbehälter beim Kunden ausgelegt ist. Sie gilt nicht für Flaschenbündel, welche für die Verwendung unter extremen Umwelt- oder Betriebsbedingungen ausgelegt sind, bei denen zusätzliche und außergewöhnliche Anforderungen gelten, um Sicherheitsnormen, Zuverlässigkeit und Leistungsfähigkeit aufrechtzuerhalten, z. B. für Offshore-Flaschenbündel.
Einige besondere (z. B. elektronische) Anwendungen erfordern einen alternativen Auslegungsansatz. Mit Zustimmung der Inspektionsstelle dürfen die Sammelleitung und ihre Rohrleitungsbauteile für einen für die Betriebsbedingungen angemessenen Druck ausgelegt und geprüft werden.
Besondere Anforderungen für Acetylen-Flaschenbündel, welche Acetylen in einem Lösemittel enthalten, sind in Anhang B angegeben. Diese Internationale Norm gilt jedoch nicht für Acetylen-Flaschenbündel mit lösemittelfreien Acetylenflaschen.
Diese Internationale Norm gilt in erster Linie für andere Industriegase als Flüssiggas (en: liquefied petroleum gas (LPG)), darf jedoch auch für LPG verwendet werden.
Sofern nicht anderweitig angegeben, müssen die in einem Flaschenbündel verwendeten einzelnen Flaschen den anwendbaren Normen für einzelne Flaschen entsprechen. Diese Internationale Norm legt die zusätzlichen Anforderungen an den Zusammenbau von einzelnen Flaschen zu einem Bündel fest.

Bouteilles à gaz - Cadres de bouteilles - Conception, fabrication, essais et inspection (ISO 10961:2010)

L'ISO 10961:2010 spécifie les exigences de conception, de fabrication, d'essai et de contrôle initial d'un cadre de bouteilles transportable. Elle est applicable aux cadres de bouteilles contenant du gaz comprimé, du gaz liquéfié et des mélanges de ceux-ci. Elle est applicable également aux cadres de bouteilles pour l'acétylène.
L'ISO 10961:2010 n'est pas applicable aux assemblages dans lesquels les bouteilles sont liées à un collecteur commun dans une structure support conçue pour être fixée de manière permanente à un véhicule routier, à un wagon ferroviaire ou au sol en tant que réservoir de stockage client. Elle n'est pas applicable aux cadres de bouteilles conçus pour une utilisation dans des conditions environnementales ou d'exploitation extrêmes, lorsque des exigences exceptionnelles sont imposées pour le maintien des normes de sécurité, de la fiabilité et de la performance, par exemple les cadres de bouteilles pour une utilisation en mer.
Les exigences spécifiques pour les cadres de bouteilles d'acétylène contenant de l'acétylène dans un solvant sont fournies dans l'Annexe B. L'ISO 10961:2010 ne traite cependant pas des cadres de bouteilles d'acétylène équipés de bouteilles d'acétylène sans solvant.
L'ISO 10961:2010 est prioritairement prévue pour les gaz industriels autres que les gaz de pétrole liquéfié (GPL), mais elle peut également être utilisée pour les GPL.

Plinske jeklenke - Snopi jeklenk - Konstruiranje, proizvodnja, preskušanje in kontrola (ISO 10961:2010)

ISO 10961:2010 določa zahteve za konstruiranje, proizvodnjo, preskušanje in začetni nadzor premičnih snopov jeklenk. Uporablja se za snope jeklenk, ki vsebujejo stisnjeni plin, utekočinjeni plin in mešanice teh plinov. Uporablja se tudi za snope jeklenk za acetilen.
Ne uporablja se za embalažo, v kateri so jeklenke zbrane v podpornem okvirju, ki je namenjen stalni namestitvi na cestno vozilo, železniški vagon ali tla kot odjemalčeva posoda za shranjevanje. Ne uporablja se za snope jeklenk, ki so namenjeni za uporabo v izrednih okoljskih ali delovnih pogojih, pri katerih so določene dodatne in izredne zahteve za ohranjanje varnostnih standardov, zanesljivosti in lastnosti, npr. snopi jeklenk na morju.
Posebne zahteve za snope jeklenk za acetilen, ki vsebujejo acetilen v raztopini, so vključene v prilogi. Vendar ISO 10961 ne zajema snopov jeklenk za acetilen, v katerih so jeklenke za acetilen brez raztopine.
ISO 10961 se predvsem uporablja za industrijske pline, ki niso utekočinjen naftni plin (LPG), vendar se lahko uporablja tudi za LPG.

General Information

Status
Withdrawn
Publication Date
03-Apr-2012
Withdrawal Date
03-Dec-2019
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
04-Dec-2019

Relations

Buy Standard

Standard
EN ISO 10961:2012
English language
28 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10961:2012
01-maj-2012
1DGRPHãþD
SIST EN 13769:2004
SIST EN 13769:2004/A1:2005
Plinske jeklenke - Snopi jeklenk - Konstruiranje, proizvodnja, preskušanje in
kontrola (ISO 10961:2010)
Gas cylinders - Cylinder bundles - Design, manufacture, testing and inspection (ISO
10961:2010)
Gasflaschen - Flaschenbündel - Auslegung, Herstellung, Prüfung und Inspektion (ISO
10961:2010)
Bouteilles à gaz - Cadres de bouteilles - Conception, fabrication, essais et inspection
(ISO 10961:2010)
Ta slovenski standard je istoveten z: EN ISO 10961:2012
ICS:
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
SIST EN ISO 10961:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10961:2012

---------------------- Page: 2 ----------------------

SIST EN ISO 10961:2012


EUROPEAN STANDARD
EN ISO 10961

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2012
ICS 23.020.30 Supersedes EN 13769:2003
English Version
Gas cylinders - Cylinder bundles - Design, manufacture, testing
and inspection (ISO 10961:2010)
Bouteilles à gaz - Cadres de bouteilles - Conception, Gasflaschen - Flaschenbündel - Auslegung, Herstellung,
fabrication, essais et inspection (ISO 10961:2010) Prüfung und Inspektion (ISO 10961:2010)
This European Standard was approved by CEN on 9 March 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10961:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 10961:2012
EN ISO 10961:2012 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 10961:2012
EN ISO 10961:2012 (E)
Foreword
The text of ISO 10961:2010 has been prepared by Technical Committee ISO/TC 58 “Gas cylinders” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 10961:2012 by
Technical Committee CEN/TC 23 “Transportable gas cylinders” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2012, and conflicting national standards shall be withdrawn at
the latest by October 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 13769:2003.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 10961:2010 has been approved by CEN as a EN ISO 10961:2012 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 10961:2012

---------------------- Page: 6 ----------------------

SIST EN ISO 10961:2012

INTERNATIONAL ISO
STANDARD 10961
Second edition
2010-10-15

Gas cylinders — Cylinder bundles —
Design, manufacture, testing and
inspection
Bouteilles à gaz — Cadre
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.