EN 13480-8:2012/A1:2014

Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping

This Part of EN 13480 specifies requirements for industrial piping systems made of aluminium and aluminium alloys in addition to the general requirements for industrial piping according to the series of standards EN 13480 and CEN/TR 13480-7.

Metallische industrielle Rohrleitungen - Teil 8: Zusatzanforderungen an Rohrleitungen aus Aluminium und Aluminumlegierungen

Dieser Teil der EN 13480 legt Anforderungen für industrielle Rohrleitungen aus Aluminium und Aluminium-legierungen fest, zusätzlich zu den allgemeinen Anforderungen an industrielle Rohrleitungen nach der Normenreihe EN 13480 und CEN/TR 13480-7.

Tuyauteries industrielles métalliques - Partie 8: Exigences complémentaires relatives aux tuyauteries en aluminium et alliages d'aluminium

Cette partie de l'EN 13480 spécifie les exigences relatives aux systèmes de tuyauteries industrielles réalisés
en aluminium et en alliages d’aluminium et vient compléter les exigences générales relatives aux tuyauteries
industrielles de la série de normes EN 13480 et CEN/TR 13480-7.

Kovinski industrijski cevovodi - 8. del: Dodatne zahteve za cevovode iz aluminija in aluminijevih zlitin - Dopolnilo A1

Ta del tega evropskega standarda poleg splošnih zahtev za industrijske cevovode v skladu s serijo standardov EN 13480:2012 in standardom CEN/TR 13480-7:2002 določa zahteve za industrijske cevne sisteme iz aluminija ali aluminijevih zlitin.

General Information

• Status: Withdrawn
• Publication Date: 13-May-2014
• Withdrawal Date: 27-Jun-2017
• ICS: 23.040.01 - Pipeline components and pipelines in general
• Technical Committee: CEN/TC 267 - Industrial piping and pipelines
• Drafting Committee: CEN/TC 267/WG 9 - Aluminium and aluminium alloy piping
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 28-Jun-2017
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 13480-8:2012/A1:2014 - Metallic industrial piping - Part 8: Additionnal requirements for aluminium and aluminium alloy piping

Relations

• Replaced By: EN 13480-8:2017 - Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping
• Effective Date: 15-Feb-2017
• Amends: EN 13480-8:2012 - Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2014
Kovinski industrijski cevovodi - 8. del: Dodatne zahteve za cevovode iz aluminija
in aluminijevih zlitin - Dopolnilo A1
Metallic industrial piping - Part 8: Additionnal requirements for aluminium and aluminium
alloy piping
Metallische industrielle Rohrleitungen - Teil 8: Zusatzanforderungen an Rohrleitungen
aus Aluminium und Aluminiumlegierungen
Tuyauteries industrielles métalliques - Partie 8: Exigences complémentaires relatives aux
tuyauteries en aluminium et alliages d'aluminium
Ta slovenski standard je istoveten z: EN 13480-8:2012/A1:2014
ICS:
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
77.150.10 Aluminijski izdelki Aluminium products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 13480-8:2012/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2014
ICS 23.040.01
English Version
Metallic industrial piping - Part 8: Additional requirements for
aluminium and aluminium alloy piping
Tuyauteries industrielles métalliques - Partie 8: Exigences Metallische industrielle Rohrleitungen - Teil 8:
complémentaires relatives aux tuyauteries en aluminium et Zusatzanforderungen an Rohrleitungen aus Aluminium und
alliages d'aluminium Aluminumlegierungen
This amendment A1 modifies the European Standard EN 13480-8:2012; it was approved by CEN on 11 January 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13480-8:2012/A1:2014 E
worldwide for CEN national Members.

Contents Page
Foreword .4
1 Modification to Foreword .5
2 Modification to Clause 1 .5
3 Modification to Clause 2 .5
4 Modification to Clause 3 .7
5 Modification to Clause 4 .7
6 Modification to 5.1 and 5.2 .7
7 Modification to 5.3 .8
8 Modification to 5.4 .8
9 Modification to 5.6 .8
10 Modification to 5.7 .9
11 Modification to 5.8 .9
12 Modification to 5.11 .9
13 Modification to 6.2 .9
14 Modification to 6.3 .9
15 Modification to 6.4 . 10
16 Modification to 6.5 . 10
17 Modification to 6.8 . 11
18 Modification to 6.9 . 12
19 Modification to 7.1 . 12
20 Modification to 7.2 . 12
21 Modification to 7.3.1 . 12
22 Modification to 7.3.2 . 13
23 Modification to 7.4 . 13
24 Modification to 7.5.1 . 13
25 Modification to 7.5.2 . 13
26 Modification to 7.5.3.1 . 13
27 Modification to 7.5.3.2 . 13
28 Modification to 7.5.3.3 . 14
29 Modification to 7.5.4 . 14
30 Modification to 7.6.1 . 15
31 Modification to 7.6.2 . 15
32 Modification to 7.6.4 . 15
33 Modification to 7.6.5 . 15
34 Modification to 7.6.6 . 16
35 Modification to 8.1 . 16
36 Modification to 8.2.1 . 16
37 Modification to 8.2.2 . 16
38 Modification to 8.2.3 . 16
39 Modification to 8.3 . 17
40 Modification to 8.4.1 . 17
41 Modification to 8.4.2 . 17
42 Modification to 8.4.3 . 18
43 Modification to 8.5 . 18
44 Modification to 8.6 . 19
45 Modification to 9.1 . 20
46 Modification to 9.3 . 20
47 Modification to Annex A . 21
48 Modification to Clause B.1. 21
49 Modification to Clause B.3. 21
50 Modification to B.5.1.1 . 22
51 Modification to B.5.1.2 . 22
52 Modification to B.5.1.3 . 22
53 Modification to B.5.2 . 22
54 Modification to Table B.1 . 22
55 Modification to Annex C . 24
56 Modification to Clause Y.1 . 31
57 Modification to Annex ZA . 31
58 Modification to Bibliography . 33

Foreword
This document (EN 13480-8:2012/A1:2014) has been prepared by Technical Committee CEN/TC 267
“Industrial piping and pipelines”, the secretariat of which is held by AFNOR.
This Amendment to the European Standard EN 13480-8:2012 shall be given the status of a national standard,
either by publication of an identical text or by endorsement, at the latest by November 2014, and conflicting
national standards shall be withdrawn at the latest by November 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document.
This document includes the text of the amendment itself. The amended/corrected pages of EN 13480-8:2012
will be published in July 2014 as Issue 3 of the European Standard.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

1 Modification to Foreword
th
The first sentence of the 9 paragraph of the Foreword shall read as follows:
The contact to submit queries can be found at http://www.unm.fr ([e-mail])
2 Modification to Clause 1
Replace the existing Clause 1 with the following:
This Part of EN 13480 specifies requirements for industrial piping systems made of aluminium and aluminium
alloys in addition to the general requirements for industrial piping according to the series of standards
EN 13480 and CEN/TR 13480-7.
3 Modification to Clause 2
Replace the existing Clause 2 with the following:
The following documents, in whole or in part, are normatively referenced in this document and are
indisp
...