EN 2880:2018

Aerospace series - Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in alloy steel, cadmium plated, MoS₂ lubricated - Classification: 900 MPa (at ambient temperature) / 120 °C

This document specifies the characteristics of self-locking, fuel resistant, sealing, floating, two lug anchor nuts, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated.
Classification: 900 MPa/120 °C.

Luft- und Raumfahrt - Annietmuttern, selbstsichernd, druckdicht, kraftstoffbeständig, beweglich, beiderseitiger Flansch, mit zylindrischer Aussenkung, aus legiertem Stahl, verkadmet, MoS₂-geschmiert - Klasse: 900 MPa (bei Raumtemperatur) / 120 °C

Diese Europäische Norm legt die Eigenschaften von selbstsichernden, kraftstoffbeständigen, abdichtenden, beweglichen Annietmuttern mit beiderseitigem Flansch, mit zylindrischer Aussenkung, in Stahllegierung, mit Kadmierung und MoS2-Schmierung fest.
Klasse: 900 MPa1/120 °C2.

Série aérospatiale - Écrous à river, à freinage interne, étanches au carburant, flottants, double patte, avec chambrage, en acier allié, cadmiés, lubrifiés MoS₂ - Classification: 900 MPa (à température ambiante) / 120 °C

Aeronavtika - Zakovne matice, samozaporne, odporne proti gorivu, tesnjene, premične, dvostranske, z izvrtino za valjaste vijake, iz legiranega jekla, kadmirane, mazane z MoS2 - Klasifikacija: 900 MPa (pri okoljski temperaturi)/120 °C

Ta dokument določa lastnosti samozapornih, proti gorivu odpornih, tesnjenih, premičnih, dvostranskih zakovnih matic, z izvrtino za valjaste vijake, iz legiranega jekla, kadmiranih, mazanih z MoS2.
Klasifikacija: 900 MPa/120 °C.

General Information

• Status: Withdrawn
• Publication Date: 04-Sep-2018
• Withdrawal Date: 09-Apr-2019
• ICS: 49.030.30 - Nuts
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3/S 2 - Fasteners
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 10-Apr-2019
• Ref Project: SIST EN 2880:2018 - Aerospace series - Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in alloy steel, cadmium plated, MoS₂ lubricated - Classification: 900 MPa (at ambient temperature) / 120 °C

Relations

• Merged Into: EN 2880:2018+AC:2019 - Aerospace series - Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in alloy steel, cadmium plated, MoS₂ lubricated - Classification: 900 MPa (at ambient temperature) / 120 °C
• Effective Date: 16-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 2880:2018
01-november-2018
$HURQDYWLND=DNRYQHPDWLFHVDPR]DSRUQHRGSRUQHSURWLJRULYXWHVQMHQH
SUHPLþQHGYRVWUDQVNH]L]YUWLQR]DYDOMDVWHYLMDNHL]OHJLUDQHJDMHNODNDGPLUDQH
PD]DQH]0R6.ODVLILNDFLMD03DSULRNROMVNLWHPSHUDWXULƒ&
$HURVSDFHVHULHV1XWVDQFKRUVHOIORFNLQJIXHOUHVLVWDQWVHDOLQJIORDWLQJWZROXJ
ZLWKFRXQWHUERUHLQDOOR\VWHHOFDGPLXPSODWHG0R6"OXEULFDWHG&ODVVLILFDWLRQ
03DDWDPELHQWWHPSHUDWXUHƒ&
/XIWXQG5DXPIDKUW$QQLHWPXWWHUQVHOEVWVLFKHUQGGUXFNGLFKWNUDIWVWRIIEHVWlQGLJ
EHZHJOLFKEHLGHUVHLWLJHU)ODQVFKPLW]\OLQGULVFKHU$XVVHQNXQJDXVOHJLHUWHP6WDKO
YHUNDGPHW0R6"JHVFKPLHUW.ODVVH03DEHL5DXPWHPSHUDWXUƒ&
6pULHDpURVSDWLDOHeFURXVjULYHUjIUHLQDJHLQWHUQHpWDQFKHVDXFDUEXUDQWIORWWDQWV
GRXEOHSDWWHDYHFFKDPEUDJHHQDFLHUDOOLpFDGPLpVOXEULILpV0R6"&ODVVLILFDWLRQ
03DjWHPSpUDWXUHDPELDQWHƒ&
Ta slovenski standard je istoveten z: EN 2880:2018
ICS:
49.030.30 Matice Nuts
SIST EN 2880:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 2880:2018

---------------------- Page: 2 ----------------------

SIST EN 2880:2018


EN 2880
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2018
EUROPÄISCHE NORM
ICS 49.030.30 Supersedes
English Version

Aerospace series - Nuts, anchor, self-locking, fuel resistant,
sealing, floating, two lug, with counterbore, in alloy steel,
cadmium plated, MoS2 lubricated - Classification: 900 MPa
(at ambient temperature) / 120 °C
Série aérospatiale - Écrous à river, à freinage interne, Luft- und Raumfahrt - Annietmuttern, selbstsichernd,
étanches au carburant, flottants, double patte, avec druckdicht, kraftstoffbeständig, beweglich,
chambrage, en acier allié, cadmiés, lubrifiés MoS2 - beiderseitiger Flansch, mit zylindrischer Aussenkung,
Classification: 900 MPa (à température ambiante) / aus legiertem Stahl, verkadmet, MoS2-geschmiert -
120 °C Klasse: 900 MPa (bei Raumtemperatur) / 120 °C
This European Standard was approved by CEN on 11 June 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2880:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 2880:2018
EN 2880:2018 (E)
Contents
Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Required characteristics . 5
4 Designation. 8
5 Marking . 8
6 Technical specification . 8



2

---------------------- Page: 4 ----------------------

...