EN 3660-005:2018+AC:2019
(Main)Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 005: Cable outlet, style A, 90°, unsealed with clamp strain relief - Product standard
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 005: Cable outlet, style A, 90°, unsealed with clamp strain relief - Product standard
This European Standard defines a range of cable outlets, style A, 90°, unsealed with clamp strain relief for use under the following conditions:
Associated electrical connector(s) : EN 3660-002
Temperature range, Class N : - 65 °C to 200 °C
Class W : - 65 °C to 175 °C
Class K : -65 °C to 260 °C
Class A : - 65 °C to 260 °C
Class T : - 65 °C to 175 °C
Class Z : - 65 °C to 175 °C
Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 005: Endgehäuse, Bauform A, 90°- Ausführung, nicht abgedichtet, mit Zugentlastungsklemme - Produktnorm
Diese Europäische Norm legt eine Reihe von Endgehäusen, Bauform A, 90°-Ausführung, nicht abgedichtet,
mit Zugentlastungsklemme für die Verwendung unter den folgenden Bedingungen fest:
Zugehörige(r) elektrische(r) Steckverbinder: EN 3660-002
Temperaturbereich, Klasse N : −65 °C bis 200 °C
Klasse W : −65 °C bis 175 °C
Klasse K : −65 °C bis 260 °C
Klasse A : −65 °C bis 260 °C
Klasse T : −65 °C bis 175 °C
Klasse Z : −65 °C bis 175 °C
Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 005 : Raccord, type A, coudé à 90°, non étanche, avec brides serre-câbles - Norme de produit
La présente Norme européenne de produit définit une gamme de raccords coudés à 90°, non étanches, type A, avec brides serre-câbles, destinés à être utilisés dans les conditions ci-après :
Connecteur(s) électrique(s) associé(s) : EN 3660-002
Plage de températures, Classe N : - 65 °C à 200 °C
Classe W : - 65 °C à 175 °C
Classe K : - 65 °C à 260 °C
Classe A : - 65 °C à 260 °C
Classe T : - 65 °C à 175 °C
Classe Z : - 65 °C à 175 °C
Aeronavtika - Dodatki za okrogle in pravokotne električne in optične konektorje - 005. del: Kabelska spojka, tip A, 90°, netesnjena, z razbremenilno sponko - Standard za proizvod (vključno s popravkom AC)
Ta evropski standard opredeljuje različne kabelske spojke, tipa A, 90°, netesnjene, z razbremenilno sponko za uporabo pod naslednjimi pogoji:
Povezani električni konektorji: : EN 3660-002
Temperaturno območje, Razred N : od −65 °C do 200 °C
Razred W : od −65 °C do 175 °C
Razred K : od –65 °C do 260 °C
Razred A : od −65 °C do 260 °C
Razred T : od −65 °C do 175 °C
Razred Z : od −65 °C do 175 °C
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2019
Nadomešča:
SIST EN 3660-005:2019
Aeronavtika - Dodatki za okrogle in pravokotne električne in optične konektorje -
005. del: Kabelska spojka, tip A, 90°, netesnjena, z razbremenilno sponko -
Standard za proizvod (vključno s popravkom AC)
Aerospace series - Cable outlet accessories for circular and rectangular electrical and
optical connectors - Part 005: Cable outlet, style A, 90°, unsealed with clamp strain relief
- Product standard
Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und
Rechtecksteckverbinder - Teil 005: Endgehäuse, Bauform A, 90° Ausführung, nicht
abgedichtet, mit Zugentlastungsklemme - Produktnorm
Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires
électriques et optiques - Partie 005 : Raccord, type A, coudé à 90°, non étanche, avec
brides serre-câbles - Norme de produit
Ta slovenski standard je istoveten z: EN 3660-005:2018+AC:2019
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 3660-005:2018+AC
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2019
EUROPÄISCHE NORM
ICS 49.060 Supersedes EN 3660-005:2018
English Version
Aerospace series - Cable outlet accessories for circular and
rectangular electrical and optical connectors - Part 005:
Cable outlet, style A, 90°, unsealed with clamp strain relief
- Product standard
Série aérospatiale - Accessoires arrière pour Luft- und Raumfahrt - Endgehäuse für elektrische und
connecteurs circulaires et rectangulaires électriques et optische Rund- und Rechtecksteckverbinder - Teil 005:
optiques - Partie 005 : Raccord, type A, coudé à 90°, Endgehäuse, Bauform A, 90° Ausführung, nicht
non étanche, avec brides serre-câbles - Norme de abgedichtet, mit Zugentlastungsklemme -
produit Produktnorm
This European Standard was approved by CEN on 11 June 2018 and includes Corrigendum issued by CEN on 1 May 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N
EUROPÄISCHES KOMITEE FÜR NORMUN G
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3660-005:2018+AC:2019 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Characteristics . 4
5 Designation. 12
6 Marking . 12
7 Technical specification . 12
European foreword
This document (EN 3660-005:2018+AC:2019) has been prepared by the Aerospace and Defence
Industries Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2019, and conflicting national standards
shall be withdrawn at the latest by November 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document includes Corrigendum 1 issued by CEN on 1 May 2019.
This document supersedes ˜EN 3660-005:2018™.
The start and finish of text introduced or altered by corrigendum is indicated in the text by tags ˜ ™.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
1 Scope
This European Standard defines a range of cable outlets, style A, 90°, unsealed with clamp strain relief for
use under the following conditions:
Associated electrical connector(s) : EN 3660-002
Temperature range, Class N : − 65 °C to 200 °C
Class W : − 65 °C to 175 °C
Class K : − 65 °C to 260 °C
Class A : − 65 °C to 260 °C
˜Class T : − 65 °C to 175 °C
Class Z : − 65 °C to 175 °C™
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
*
EN 2591- , Aerospace series — Elements of electrical and optical connection — Test methods
EN 2997 (all parts), Aerospace series ― Connectors, electrical, circular, coupled by threaded ring, fire-resistant
or non fire-resistant, operating temperatures – 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak
EN 3660-001, Aerospace series — Cable outlet accessories for circular and rectangular electrical and
optical connectors — Part 001: Technical specification
EN 3660-002, Aerospace series — Cable outlet accessories for circular and rectangular electrical and
optical connectors — Part 002: Index of product standards
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 3660-001 apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
4 Characteristics
4.1 Dimensions and mass
For dimensions and mass, see Figure 1 and Table 1.
For interface dimensions, see 4.2.
*
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.