EN 1760-2:2001+A1:2009

Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars

This standard contains requirements for pressure sensitive edges and pressure sensitive bars for use as safety devices and not as actuating devices for normal operational. The standard applies to pressure sensitive edges and pressure sensitive bars used to detect persons or parts of persons who may be exposed to danger such as hazardous moving parts.
The purpose of this standard relates primarily to safety and reliability rather than suitability. For the relationship between safety and reliability, see annex D of EN 954-1:1996.
This standard specifies requirements for pressure sensitive edges and pressure sensitive bars with and without an external reset facility.
This standard is restricted to the functioning of pressure sensitive edges and pressure sensitive bars and does not specify the requirements for their application. However, clause 6 contains requirements for information for use which has to be provided by the manufacturer. A selection procedure is given in annex C.
The design notes in annex D give additional guidance regarding the design of pressure sensitive edges and pressure sensitive bars which will give safe and reliable service. The notes in annex E provide general guidance regarding application, while annex G provides guidance on the application of sensors, especially for air-pulse systems.
This standard does not specify the dimensions of the pressure sensitive edges or bars in relation to a particular application.
The standard does not apply to stopping devices according to EN 60204-1 used only for normal operational, including emergency stopping, of machinery. Additional requirements may be necessary where pressure sensitive edges and pressure sensitive bars are used in locations accessible to elderly or disabled people or children.
NOTE   It may not be possible to carry out all the tests in this standard for pressure sensitive edges and pressure sensitive bars when they have been designed and built into the machinery by its manufacturer.

Sicherheit von Maschinen - Druckempfindliche Schutzeinrichtungen - Teil 2: Allgemeine Leitsätze für die Gestaltung und Prüfung von Schaltleisten und Schaltstangen

Sécurité des machines - Dispositifs de protection sensibles à la pression - Partie 2: Principes généraux de conception et d'essais des bords et barres sensibles à la pression

Varnost strojev - Varovalne naprave, občutljive na tlak - 2. del: Splošna načela načrtovanja in preskušanja robov in drogov, občutljivih na dotik

General Information

• Status: Withdrawn
• Publication Date: 31-Mar-2009
• Withdrawal Date: 16-Apr-2013
• ICS: 13.110 - Safety of machinery
• Technical Committee: CEN/TC 114 - Safety of machinery
• Drafting Committee: CEN/TC 114/WG 8 - Pressure-sensitive mats and similar devices
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 17-Apr-2013
• Completion Date: 17-Apr-2013
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN 1760-2:2002+A1:2009 - Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars

Relations

• Merged From: EN 1760-2:2001 - Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars
• Effective Date: 18-Jan-2023
• Replaced By: EN ISO 13856-2:2013 - Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-2:2013)
• Effective Date: 24-Apr-2013

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1760-2:2002+A1:2009
01-maj-2009
1DGRPHãþD
SIST EN 1760-2:2002
9DUQRVWVWURMHY9DURYDOQHQDSUDYHREþXWOMLYHQDWODNGHO6SORãQDQDþHOD
QDþUWRYDQMDLQSUHVNXãDQMDURERYLQGURJRYREþXWOMLYLKQDGRWLN
Safety of machinery - Pressure sensitive protective devices - Part 2: General principles
for the design and testing of pressure sensitive edges and pressure sensitive bars
Sicherheit von Maschinen - Druckempfindliche Schutzeinrichtungen - Teil 2: Allgemeine
Leitsätze für die Gestaltung und Prüfung von Schaltleisten und Schaltstangen
Sécurité des machines - Dispositifs de protection sensibles à la pression - Partie 2:
Principes généraux de conception et d'essais des bords et barres sensibles à la pression
Ta slovenski standard je istoveten z: EN 1760-2:2001+A1:2009
ICS:
13.110 Varnost strojev Safety of machinery
SIST EN 1760-2:2002+A1:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 1760-2:2002+A1:2009

---------------------- Page: 2 ----------------------

SIST EN 1760-2:2002+A1:2009


EUROPEAN STANDARD
EN 1760-2:2001+A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2009
ICS 13.110 Supersedes EN 1760-2:2001
English Version
Safety of machinery - Pressure sensitive protective devices -
Part 2: General principles for the design and testing of pressure
sensitive edges and pressure sensitive bars
Sécurité des machines - Dispositifs de protection sensibles Sicherheit von Maschinen - Druckempfindliche
à la pression - Partie 2: Principes généraux de conception Schutzeinrichtungen - Teil 2: Allgemeine Leitsätze für die
et d'essais des bords et barres sensibles à la pression Gestaltung und Prüfung von Schaltleisten und
Schaltstangen
This European Standard was approved by CEN on 13 January 2001 and includes Amendment 1 approved by CEN on 22 February 2009.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1760-2:2001+A1:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 1760-2:2002+A1:2009
EN 1760-2:2001+A1:2009 (E)
Contents Page
Foreword .5
Introduction .7
1 Scope .7
2 Normative references .8
3 Terms and definitions . 10
4 Requirements . 17
4.1 Effective sensing surface . 17
4.2 Actuating force (see 7.4 and 7.5 for test method) . 18
4.3 Pre-travel (see 7.6.1 for test method). 18
4.4 Overtravel (see 7.6.3 for test method) . 18
4.5 Working travel (see 7.6.2 for test met
...