EN ISO 14403:2002

Water quality - Determination of total cyanide and free cyanide by continuous flow analysis (ISO 14403:2002)

Migrated from Progress Sheet (TC Comment) (2000-07-10): new TD 49 in BP (bli 991125)

Wasserbeschaffenheit - Bestimmung von Gesamtcyanid und freiem Cyanid mit der kontinuierlichen Fließanalytik (ISO 14403:2002)

Diese Internationale Norm legt Verfahren für die Bestimmung von Cyaniden in verschiedenen Wässern (wie z. B. Grund-, Trink-, Oberflächen-, Sicker- und Abwasser) mit Cyanid-Massenkonzentrationen (bezogen auf Cyanid-Ionen) von üblicherweise über 3 µg/l fest. Diese Norm beinhaltet ein CFA-Verfahren für Massenkonzentrationen im Bereich von 10 µg/l bis 100 µg/l. Der Anwendungsbereich darf durch Änderung der Arbeitsbedingungen angepasst werden.
ANMERKUNG   Meerwasser kann nach Anpassung von Reagenz- und Bezugslösungen an den Salzgehalt der Proben bei Änderungen in der Empfindlichkeit analysiert werden.

Qualité de l'eau - Dosage des cyanures totaux et des cyanures libres par analyse en flux continu (ISO 14403:2002)

La présente Norme internationale spécifie des méthodes pour le dosage des cyanures présents dans divers types d'eau (tels qu'eau souterraine, eau potable, eau de surface, lixiviat et eaux usées) en concentrations généralement supérieures à 3 µg/l, exprimées en ions cyanure. La méthode CFA est applicable à une gamme de concentrations comprises entre 10 µg/l et 100 µg/l. La gamme d'application peut être modifiée en faisant varier les conditions de fonctionnement.
NOTE L'eau de mer peut être analysée avec des changements de sensibilité et l'adaptation des réactifs et des solutions d'étalonnage à la salinité des échantillons.

Kakovost vode - Določevanje celotnega in prostega cianida z neprekinjeno pretočno analizo (ISO 14403:2002)

General Information

• Status: Withdrawn
• Publication Date: 28-Feb-2002
• Withdrawal Date: 14-Jul-2012
• ICS: 13.060.01 - Water quality in general
• Technical Committee: CEN/TC 230 - Water analysis
• Drafting Committee: CEN/TC 230/WG 1 - Physical and biochemical methods
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-Jul-2012
• Completion Date: 15-Jul-2012
• Ref Project: SIST EN ISO 14403:2003 - Water quality - Determination of total cyanide and free cyanide by continuous flow analysis (ISO 14403:2002)

Relations

• Replaced By: EN ISO 14403-2:2012 - Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 2: Method using continuous flow analysis (CFA) (ISO 14403-2:2012)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 14403:2003
01-maj-2003
.DNRYRVWYRGH'RORþHYDQMHFHORWQHJDLQSURVWHJDFLDQLGD]QHSUHNLQMHQR
SUHWRþQRDQDOL]R,62
Water quality - Determination of total cyanide and free cyanide by continuous flow
analysis (ISO 14403:2002)
Wasserbeschaffenheit - Bestimmung von Gesamtcyanid und freiem Cyanid mit der
kontinuierlichen Fließanalytik (ISO 14403:2002)
Qualité de l'eau - Dosage des cyanures totaux et des cyanures libres par analyse en flux
continu (ISO 14403:2002)
Ta slovenski standard je istoveten z: EN ISO 14403:2002
ICS:
13.060.50 3UHLVNDYDYRGHQDNHPLþQH Examination of water for
VQRYL chemical substances
SIST EN ISO 14403:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 14403:2003

---------------------- Page: 2 ----------------------

SIST EN ISO 14403:2003
EUROPEAN STANDARD
EN ISO 14403
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2002
ICS 13.060.01
English version
Water quality - Determination of total cyanide and free cyanide
by continuous flow analysis (ISO 14403:2002)
Qualité de l'eau - Dosage des cyanures totaux et des Wasserbeschaffenheit - Bestimmung von Gesamtcyanid
cyanures libres par analyse en flux continu (ISO und freiem Cyanid mit der kontinuierlichen Fließanalytik
14403:2002) (ISO 14403:2002)
This European Standard was approved by CEN on 1 March 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14403:2002 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 14403:2003
EN ISO 14403:2002 (E)
CORRECTED  2002-04-17
Foreword
This document (ISO 14403:2002) has been prepared by Technical Committee ISO/TC 147
"Water quality" in collaboration with Technical Committee CEN/TC 230 "Water analysis", the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication
of an identical text or by endorsement, at the latest by September 2002, and conflicting
national standards shall be withdrawn at the latest by September 2002.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the
United Kingdom.
Endorsement notice
The text of the International Standard ISO 14403:2002 has been approved by CEN as a
European Standard without any modifications.
NOTE  Normative references to International Standards are listed in annex ZA (normative).
2

---------------------- Page: 4 ----------------------

SIST EN ISO 14403:2003
EN ISO 14403:2002 (E)
Annex ZA
(normative)
Normative references to International Publicationswith their relevant
European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text, and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions
of any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE  Where an International Publication has been modified by common modifications,
indicated by (mod.), the relevant EN/HD applies.
Publication Year Title EN/HD Year
ISO 3696 1987 Water for analytical laboratory use — EN ISO 3696 1995
Specifications and test methods
3

---------------------- Page: 5 ----------------------

SIST EN ISO 14403:2003

---------------------- Page: 6 -------------
...