EN 1661:1997/AC:1998
(Corrigendum)Hexagon nuts with flange (ISO/DIS 4161:1996, modified)
- BACK
- 15-Dec-1998
- 21.060.20
- CEN/TC 185
Hexagon nuts with flange (ISO/DIS 4161:1996, modified)
TC - Correction in Table 1 (D)
Sechskantmuttern mit Flansch (ISO/DIS 4161:1996, modifiziert)
Ecrous hexagonaux à embase cylindro-tronconique (ISO/DIS 4161:1996, modifiée)
Šestrobe matice s poševnim krajcem (ISO/DIS 4161:1996, dopolnjen) - Dopolnilo AC
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Šestrobe matice s poševnim krajcem (ISO/DIS 4161:1996, dopolnjen) - Dopolnilo ACSechskantmuttern mit Flansch (ISO/DIS 4161:1996, modifiziert)Ecrous hexagonaux a embase cylindro-tronconique (ISO/DIS 4161:1996
...
This May Also Interest You
This document specifies the characteristics of prevailing torque (all metal) hexagon high nuts, in steel and stainless steel, with metric fine pitch thread 8 mm to 39 mm, and with product grades A and B.
NOTE These nuts are designed with an overall height hmin = mmin (as specified in ISO 898-2 and ISO 8674 for style 2) plus the prevailing torque feature. hmax has been established in function of hmin; therefore, the tolerance (hmax – hmin) does not follow the ISO code system for tolerances (IT system). The wrenching height mw,min corresponds to the values specified for style 1.
If in certain cases other specifications are requested, property classes and stainless steel grades can be selected from ISO 898-2 or ISO 3506-2.
- Standard13 pagesEnglish languagesale 10% offe-Library read for×1 day
- 24-Jun-2025
- 21.060.20
- CEN/TC 185
This document specifies the characteristics of prevailing torque (all metal) hexagon high nuts with slot(s), in steel and stainless steel, with metric coarse pitch thread M5 to M39, and with product grades A and B.
NOTE These nuts are designed with mmin as specified ISO 4032 and with an overall height h greater than in ISO 7042, in order to accommodate the prevailing torque feature with slot(s); this height h contributes to the nut resistance due to the number of engaged threads. hmin values have been calculated as a function of hmax together with a ratio hmax/D that progresses regularly with increasing diameter; therefore, the tolerance (hmax – hmin) does not follow the ISO code system for tolerances (IT system).
If in certain cases other specifications are requested, property classes and stainless steel grades can be selected from ISO 898-2 or ISO 3506-2.
- Standard14 pagesEnglish languagesale 10% offe-Library read for×1 day
- 24-Jun-2025
- 21.060.20
- CEN/TC 185
This document specifies the characteristics of prevailing torque hexagon regular nuts (with non‑metallic insert), in steel and stainless steel, with metric coarse pitch thread M3 to M39, and with product grades A and B.
NOTE These nuts are designed with an overall height equal to mmin (as specified in ISO 898-2 and ISO 4032 for style 1) plus the prevailing torque feature. The height of the prevailing torque feature (hmax – mmin) for the non-metallic insert is identical for regular, high and thin nuts for a given diameter.
Nuts with sizes D < M5 and design principles in accordance with style 1 are specified in Annex A.
If in certain cases other specifications are requested, property classes and stainless steel grades can be selected from ISO 898-2 or ISO 3506-2.
- Standard17 pagesEnglish languagesale 10% offe-Library read for×1 day
- 24-Jun-2025
- 21.060.20
- CEN/TC 185
This document specifies the characteristics of prevailing torque hexagon regular nuts (with non‑metallic insert), in steel and stainless steel, with metric fine pitch thread 8 mm to 39 mm, and with product grades A and B.
NOTE These nuts are designed with an overall height equal to mmin (as specified in ISO 898-2 and ISO 8673 for style 1) plus the prevailing torque feature. The height of the prevailing torque feature (hmax – mmin) for the non-metallic insert is identical for regular, high and thin nuts for a given diameter.
If in certain cases other specifications are requested, property classes and stainless steel grades can be selected from ISO 898-2 or ISO 3506-2.
- Standard13 pagesEnglish languagesale 10% offe-Library read for×1 day
- 24-Jun-2025
- 21.060.20
- CEN/TC 185
This document specifies the characteristics of prevailing torque hexagon thin nuts (with non‑metallic insert), in steel and stainless steel, with metric coarse pitch thread M3 to M39, and with product grades A and B.
NOTE These nuts are designed with an overall height equal to mmin (as specified in ISO 898-2 and ISO 4035 for style 0) plus the prevailing torque feature. The height of the prevailing torque feature (hmax – mmin) for the non-metallic insert is identical for regular, high and thin nuts for a given diameter.
Nuts with sizes D < M5 and design principles in accordance with style 0 are specified in Annex A.
WARNING — Thin nuts (style 0) have a reduced loadability compared to regular or high nuts, they are not designed to provide resistance to thread stripping (see ISO 898-2).
If in certain cases other specifications are requested, stainless steel grades and property classes can be selected from ISO 3506-2.
- Standard17 pagesEnglish languagesale 10% offe-Library read for×1 day
- 24-Jun-2025
- 21.060.20
- CEN/TC 185
This document specifies the characteristics of prevailing torque (all metal) hexagon high nuts, in steel and stainless steel, with metric coarse pitch thread M5 to M39, and with product grades A and B.
NOTE These nuts are designed with an overall heigth hmin = mmin (as specified in ISO 898-2 and ISO 4033 for style 2) plus the prevailing torque feature. hmax has been established in function of hmin; therefore, the tolerance (hmax – hmin) does not follow the ISO code system for tolerances (IT system). The wrenching height mw,min corresponds to the values specified for style 1.
If in certain cases other specifications are requested, property classes and stainless steel grades can be selected from ISO 898-2 or ISO 3506-2.
- Standard13 pagesEnglish languagesale 10% offe-Library read for×1 day
- 24-Jun-2025
- 21.060.20
- CEN/TC 185
This document specifies the characteristics of prevailing torque hexagon high nuts (with non‑metallic insert), in steel and stainless steel, with metric coarse pitch thread M5 to M39, and with product grades A and B.
NOTE These nuts are designed with an overall height equal to mmin (as specified in ISO 898-2 and ISO 4033 for style 2) plus the prevailing torque feature. The height of the prevailing torque feature (hmax – mmin) for the non-metallic insert is identical for regular, high and thin nuts for a given diameter.
If in certain cases other specifications are requested, property classes and stainless steel grades can be selected from ISO 898-2 or ISO 3506-2.
- Standard13 pagesEnglish languagesale 10% offe-Library read for×1 day
- 17-Jun-2025
- 21.060.20
- CEN/TC 185
This document specifies the characteristics of prevailing torque (all metal) hexagon regular nuts, in steel and stainless steel, with metric coarse pitch thread M5 to M39, and with product grades A and B.
NOTE These nuts are designed with an overall height hmin = mmin (as specified in ISO 898-2 and ISO 4032 for style 1) plus the prevailing torque feature. hmax has been established in function of hmin; therefore, the tolerance (hmax – hmin) does not follow the ISO code system for tolerances (IT system).
If in certain cases other specifications are requested, property classes and stainless steel grades can be selected from ISO 898-2 or ISO 3506-2.
- Standard13 pagesEnglish languagesale 10% offe-Library read for×1 day
- 17-Jun-2025
- 21.060.20
- CEN/TC 185
This document specifies the characteristics of hexagon thin nuts (style 0), in steel and stainless steel, with metric fine pitch thread 8 mm to 64 mm, and with product grades A and B.
Thin nuts used as jam nuts are to be assembled together with a regular or high nut.
WARNING — Thin nuts (style 0) have a reduced loadability compared to regular nuts or high nuts, and are not designed to provide resistance to thread stripping (see ISO 898-2).
If in certain cases other specifications are requested, stainless steel grades and property classes can be selected from ISO 3506-2.
- Standard16 pagesEnglish languagesale 10% offe-Library read for×1 day
- 05-Sep-2023
- 21.060.20
- CEN/TC 185
This document specifies the characteristics of hexagon thin nuts (style 0), in steel and stainless steel, with metric coarse pitch thread M1,6 to M64, and with product grades A and B.
Thin nuts used as jam nuts are to be assembled together with a regular or high nut.
WARNING — Thin nuts (style 0) have a reduced loadability compared to regular nuts or high nuts, and are not designed to provide resistance to thread stripping (see ISO 898-2).
If in certain cases other specifications are requested, stainless steel grades and property classes can be selected from ISO 3506-2.
- Standard17 pagesEnglish languagesale 10% offe-Library read for×1 day
- 05-Sep-2023
- 21.060.20
- CEN/TC 185
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...