iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 792-13:2000

(Main)

Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools

Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools

This standard is applicable to fastener driving tools which are handled by one person and in which energy in a linear movement is applied to a loaded fastener for the purpose of driving this into a workpiece of a determined material. During the driving operation, the fastener leaves the tool partially or entirely with sufficient velocity to overcome the resistance of penetration, and forms a mechanical connection or attachment of different workpieces.

Handgehaltene nicht-elektrisch betriebene Maschinen - Sicherheitsanforderungen - Teil 13: Eintreibgeräte

Diese Norm gilt für Eintreibgeräte, die von einer Person in der Hand gehalten werden und in der Energie mit einer geradlinigen Bewegung auf eingebrachte Eintreibgegenstände zum Zwecke des Eintreibens in ein Werkstück aus bestimmten Material übertragen wird. Die Eintreibgegenstände verlassen beim Eintreibvorgang das Gerät mit einer den Eintreibwiderstand überwindenden Geschwindigkeit ganz oder teilweise und stellen eine mechanische Verbindung oder Befestigung verschiedener Werkstücke dar.

Machines portatives à moteur non électrique - Prescriptions de sécurité - Partie 13: Machines à enfoncer les fixations

La présente norme s'applique aux machines à enfoncer les fixations tenues à la main par un seul opérateur et dans lesquelles une énergie à mouvement linéaire est appliquée sur une fixation chargée dans l'appareil dans le but d'enfoncer celle-ci dans une pièce en matériau défini. Pendant l'opération d'enfoncement, la fixation quitte l'outil partiellement ou entièrement avec une vitesse suffisante pour vaincre la résistance de pénétration et réalise soit un accouplement mécanique soit un assemblage de différentes pièces.

Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools

General Information

Status
Withdrawn
Publication Date
20-Jun-2000
Withdrawal Date
23-Sep-2008
ICS
25.140.99 - Other hand-held tools
Technical Committee
CEN/TC 255 - Hand-held, non-electric power tools - Safety
Drafting Committee
CEN/TC 255 - Hand-held, non-electric power tools - Safety
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
24-Sep-2008
Completion Date
24-Sep-2008
Directive
98/37/EC - Machinery
Mandate
M/BC/CEN/88/13 - Standardization request to CEN/CENELEC relating to machinery
Ref Project
SIST EN 792-13:2000 - Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools

Relations

Merged Into
EN 792-13:2000+A1:2008 - Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools
Effective Date
18-Jan-2023
Revised
EN ISO 11148-13:2018 - Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools (ISO 11148-13:2017)
Effective Date
22-Dec-2008

Buy Standard

EN 792-13:2000EN 792-13:2000
PreviousNext
Standard
EN 792-13:2000
English language
33 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 792-13:2000
01-december-2000
Hand-held non-electric power tools - Safety requirements - Part 13: Fastener
driving tools
Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving
tools
Handgehaltene nicht-elektrisch betriebene Maschinen - Sicherheitsanforderungen - Teil
13: Eintreibgeräte
Machines portatives a moteur non électrique - Prescriptions de sécurité - Partie 13:
Machines a enfoncer les fixations
Ta slovenski standard je istoveten z: EN 792-13:2000
ICS:
25.140.10 3QHYPDWLþQDRURGMD Pneumatic tools
SIST EN 792-13:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 792-13:2000

---------------------- Page: 2 ----------------------

SIST EN 792-13:2000

---------------------- Page: 3 ----------------------

SIST EN 792-13:2000

---------------------- Page: 4 ----------------------

SIST EN 792-13:2000

---------------------- Page: 5 ----------------------

SIST EN 792-13:2000

---------------------- Page: 6 ----------------------

SIST EN 792-13:2000

---------------------- Page: 7 ----------------------

SIST EN 792-13:2000

---------------------- Page: 8 ----------------------

SIST EN 792-13:2000

---------------------- Page: 9 ----------------------

SIST EN 792-13:2000

---------------------- Page: 10 ----------------------

SIST EN 792-13:2000

---------------------- Page: 11 ----------------------

SIST EN 792-13:2000

---------------------- Page: 12 ----------------------

SIST EN 792-13:2000

---------------------- Page: 13 ----------------------

SIST EN 792-13:2000

-----
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 11148-13:2018(Main)
Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools (ISO 11148-13:2017)
SIST EN ISO 11148-13:2019

ISO 11148-13:2017 specifies safety requirements for hand-held non-electric power tools (hereinafter referred to as "fastener driving tools") intended for installation of a fastener (see Annex B), forming a mechanical connection or attachment with the workpiece which are for example wood and wood-based materials, plastic materials, fibre materials (loose or compacted), cementitious materials, metals and combinations of these materials. The fastener driving tools for fasteners can be powered by compressed air or combustible gases (which may be ignited by a battery or accumulator) and the energy is transmitted to an impacted element by an intermediary component that does not leave the device. These tools are intended to be used by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer.
ISO 11148-13:2017 is applicable to fastener driving tools in which energy is applied to a loaded fastener for the purpose of driving this into a workpiece.
ISO 11148-13:2017 is not applicable to fastener driving tools in which the energy for driving fasteners is drawn from powder-actuated cartridges, hydraulics or from any type of electrical supply.
ISO 11148-13:2017 does not deal with special requirements and modifications of hand-held power tools for the purpose of mounting them in a fixture.
ISO 11148-13:2017 deals with all significant hazards, hazardous situations or hazardous events relevant to fastener driving tools for fasteners when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of power tools in potentially explosive atmospheres.
NOTE       ISO 80079?36 gives requirements for non-electrical equipment for potentially explosive atmospheres.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11148-12:2012(Main)
Hand-held non-electric power tools - Safety requirements - Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012)
SIST EN ISO 11148-12:2013

ISO 11148-12:2012 specifies safety requirements for hand-held non-electric power tools (hereinafter "circular, oscillating and reciprocating saws") intended for sawing. The circular, oscillating and reciprocating saws can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended to be used by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer.
ISO 11148-12:2012 is applicable to circular saws, circular knives, oscillating saws having a saw blade with a radius of 50 mm or less or a diamond cutting-off blade with a radius of 100 mm or less, oscillating knives (including windshield knives) and reciprocating saws, including jig saws and power hack saws.
ISO 11148-12:2012 is not applicable to special requirements and modifications of circular, oscillating and reciprocating saws for the purpose of mounting them in fixtures.
ISO 11148-12:2012 deals with all significant hazards, hazardous situations or hazardous events relevant to circular, oscillating and reciprocating saws when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of circular, oscillating and reciprocating saws in potentially explosive atmospheres.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11148-7:2012(Main)
Hand-held non-electric power tools - Safety requirements - Part 7: Grinders (ISO 11148-7:2012)
SIST EN ISO 11148-7:2012

ISO 11148-7:2012 specifies safety requirements for hand-held non-electric power tools (hereinafter "grinders") intended for grinding and cutting-off with abrasive products, for use on all kinds of materials. The grinders can be powered by compressed air or hydraulic fluid and are intended to be used by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer.
ISO 11148-7:2012 is applicable togrinders used with:
abrasive products with a peripheral operating speed less than or equal to 80 m/s;
cutting-off wheels with a peripheral operating speed less than or equal to100 m/s;
abrasive products with an outside nominal diameter less than or equal to 230 mm;
cutting-off wheels with an outside nominal diameter less than or equal to 250 mm;
wire brushes;
diamond and reinforced [segmented] wheels with an outside nominal diameter less than or equal to 450 mm;
flap discs and flap wheels.
ISO 11148-7:2012 does not cover special requirements and modifications of grinders for the purpose of mounting them in fixtures.
It is not applicable to
die grinders with collets which are treated in ISO 11148-9;
polishers and sanders [i.e. tools used with coated abrasives except flap discs and flap wheels] which are treated in ISO 11148-8;
cutting-off machines which are driven by internal combustion engines and are used for cutting construction materials, which are treated in ISO 19432;
shaft mounted wire brushes which are treated in ISO 11148-9.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11148-2:2011(Main)
Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools (ISO/FDIS 11148-2:2011)
SIST EN ISO 11148-2:2012

ISO 11148-2:2011 specifies safety requirements for hand-held non-electric power tools without rotation (hereinafter "cutting-off and crimping power tools") intended for cutting off wires, cables, etc., and for crimping, for instance connectors to cable ends. The cutting-off and crimping power tools can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended to be used by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer.
ISO 11148-2:2011 is applicable to crimping tools without a yoke, cutters, cutting-off tools, cutting pliers and crimping pliers.
ISO 11148-2:2011 is not applicable to special requirements and modifications of cutting-off and crimping power tools for the purpose of mounting them in fixtures, and it is not applicable to "double acting hydraulic rescue tools for fire and rescue service use".
ISO 11148-2:2011 deals with all significant hazards, hazardous situations or hazardous events relevant to cutting-off and crimping power tools when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of cutting-off and crimping power tools in potentially explosive atmospheres.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11148-8:2011(Main)
Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers (ISO 11148-8:2011)
SIST EN ISO 11148-8:2012

ISO 11148-8:2011 specifies safety requirements for hand-held non-electric power tools (hereinafter "sanders and polishers") intended for polishing and sanding with all types of movement, e.g. rotary, orbital and reciprocating, using coated abrasive products, bonnets of various soft materials and endless belts. The sanders and polishers can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended to be used by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer.
ISO 11148-8:2011 is applicable to belt sanders, orbital sanders, polishers, random orbital sanders, rotary sanders and straight-line sanders.
ISO 11148-8:2011 is not applicable to special requirements and modifications of sanders and polishers for the purpose of mounting them in a fixture.
ISO 11148-8:2011 deals with all significant hazards, hazardous situations or hazardous events relevant to sanders and polishers when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of sanders and polishers in potentially explosive atmospheres.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11148-9:2011(Main)
Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders (ISO 11148-9:2011)
SIST EN ISO 11148-9:2012

ISO 11148-9:2011 specifies safety requirements for hand-held non-electric power tools fitted with collets (hereinafter "die grinders") intended for grinding and surface finishing and chamfering using mounted points, burrs and files and small wire brushes and other accessories mounted on shanks. The die grinders can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended to be used by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer.
ISO 11148-9:2011 is applicable to angle die grinders, reciprocating files, rotary files and straight die grinders.
ISO 11148-9:2011 deals with all significant hazards, hazardous situations or hazardous events relevant to die grinders when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of die grinders in potentially explosive atmospheres.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11148-1:2011(Main)
Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011)
SIST EN ISO 11148-1:2012

ISO 11148-1:2011 specifies safety requirements for hand-held non-electric power tools (hereinafter "assembly power tools for non-threaded mechanical fasteners") intended for installation, tightening or removal of both breakstem and non-breakstem rivets, bolts, plugs and fasteners from one side of a workpiece into metals, plastics and other materials. The assembly power tools for non-threaded mechanical fasteners can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended to be used by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer.
ISO 11148-1:2011 is applicable to breakstem fastener, rivet or plug tools, breakstem lockbolt tools, mandrel loaded riveting tools and rivet nut setters.
ISO 11148-1:2011 is not applicable to special requirements and modifications of hand-held power tools for the purpose of mounting them in a fixture.
ISO 11148-1:2011 deals with all significant hazards, hazardous situations or hazardous events relevant to assembly power tools for non-threaded mechanical fasteners when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of power tools in potentially explosive atmospheres.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11148-5:2011(Main)
Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011)
SIST EN ISO 11148-5:2012

ISO 11148-5:2011 specifies safety requirements for hand-held non‑electric power tools (hereinafter "rotary percussive drills") intended for making holes in hard materials, such as rock and concrete. The rotary percussive drills can be powered by  compressed air, hydraulic fluid or internal combustion engines and are intended to be used by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer.
ISO 11148-5:2011 is applicable to plug hole drills, rock drills and rotary hammers.
ISO 11148-5:2011 is not applicable to special requirements and modifications of rotary percussive drills for the purpose of mounting them in a fixture.
ISO 11148-5:2011 deals with all significant hazards, hazardous situations or hazardous events relevant to rotary percussive drills when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of rotary percussive drills in potentially explosive atmospheres.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11148-11:2011(Main)
Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears (ISO 11148-11:2011)
SIST EN ISO 11148-11:2012

ISO 11148-11:2011 specifies safety requirements for hand-held non-electric power tools (hereinafter "nibblers and shears") with a reciprocating movement for nibbling and shearing. The nibblers and shears can be powered by compressed air or hydraulic fluid and are intended to be used by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer.
ISO 11148-11:2011 is applicable to nibblers and shears.
ISO 11148-11:2011 is not applicable to special requirements and modifications of nibblers and shears for the purpose of mounting them in a fixture.  
ISO 11148-11:2011 deals with all significant hazards, hazardous situations or hazardous events relevant to nibblers and shears when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of nibblers and shears in potentially explosive atmospheres.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11148-10:2011(Main)
Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools (ISO 11148-10:2011)
SIST EN ISO 11148-10:2012

ISO 11148-10:2011 specifies safety requirements for hand-held non‑electric compression power tools (hereinafter "compression power tools") for squeeze riveting, punching, shaping, pressing and cutting of metal, plastics or other materials. The compression power tools can be powered by compressed air or hydraulic fluid and are intended to be used by one operator and supported by the operator's hand or hands, with or without a suspension, e. g. a balancer.
ISO 11148-10:2011 is applicable to crimping tools, collar splitters, power tools for metal forming (edge formers, folding tools, swagers), nut splitter heads, presses, punches, squeeze riveters, cutting power tools with parallel knives and alligator jaw compression riveters.
ISO 11148-10:2011 is not applicable to special requirements and modifications on compression power tools for the purpose of mounting them in fixtures.
ISO 11148-10:2011 deals with all significant hazards, hazardous situations or hazardous events relevant to compression power tools when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of compression power tools in potentially explosive atmospheres.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day