EN ISO 11148-5:2011

Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011)

ISO 11148-5:2011 specifies safety requirements for hand-held non‑electric power tools (hereinafter "rotary percussive drills") intended for making holes in hard materials, such as rock and concrete. The rotary percussive drills can be powered by  compressed air, hydraulic fluid or internal combustion engines and are intended to be used by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer.
ISO 11148-5:2011 is applicable to plug hole drills, rock drills and rotary hammers.
ISO 11148-5:2011 is not applicable to special requirements and modifications of rotary percussive drills for the purpose of mounting them in a fixture.
ISO 11148-5:2011 deals with all significant hazards, hazardous situations or hazardous events relevant to rotary percussive drills when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of rotary percussive drills in potentially explosive atmospheres.

Handgehaltene nicht elektrisch betriebene Maschinen - Sicherheitsanforderungen - Teil 5: Schlagbohrmaschinen (ISO 11148-5:2011)

Dieser Teil der ISO 11148 gilt für handgehaltene nicht elektrisch betriebene Maschinen (im nachstehenden
Text als 'Schlagbohrmaschinen' bezeichnet) zum Herstellen (Bohren) von Löchern in harten Materialien,
beispielsweise Gestein und Beton. Die Schlagbohrmaschinen können durch Druckluft, über Hydraulikflüssigkeit
oder Verbrennungsmotoren betrieben werden und sind dazu bestimmt, durch eine Bedienungsperson
verwendet und von dieser ohne oder mit einer Halterung, z. B. einer Ausgleichseinrichtung, mit einer oder
beiden Händen gehalten zu werden.
Dieser Teil der ISO ist anzuwenden auf:
- Sacklochbohrmaschinen;
- Gesteinsbohrmaschinen;
- Bohrhammer, drehend.
ANMERKUNG 1 Anhang B enthält Beispiele für Schlagbohrmaschinen.
In diesem Teil der ISO 11148 werden besondere Anforderungen an und Änderungen bezüglich Schlagbohrmaschinen
zum Zwecke des Spannens in einer Halterung nicht behandelt.
In diesem Teil der ISO 11148 Dokument werden alle signifikanten Gefährdungen, Gefährdungssituationen
oder Gefährdungsereignisse mit Ausnahme des Einsatzes von Schlagbohrmaschinen in explosionsfähigen
Atmosphären behandelt, wenn sie für den dafür vorgesehenen Verwendungszweck und unter für den
Hersteller vorhersehbaren Missbrauchsbedingungen angewendet werden.
ANMERKUNG 2 EN 13463-1 enthält Anforderungen an nicht elektrisch betriebene Geräte für den Einsatz in explosionsfähigen
Atmosphären.

Machines portatives à moteur non électrique - Exigences de sécurité - Partie 5: Perceuses à percussion rotatives (ISO 11148-5:2011)

L'ISO 11148-5:2011 spécifie des exigences de sécurité pour les machines portatives non électriques (ci-après appelées «perceuses à percussion rotatives») destinées au perçage de trous dans des matériaux durs comme la pierre ou le béton. Les perceuses à percussion rotatives peuvent être alimentées par air comprimé, par un fluide hydraulique ou par un moteur à combustion interne, et sont prévues pour être utilisées par un seul opérateur et être portées par la ou les mains de l'opérateur avec ou sans suspension, par exemple à l'aide d'un équilibreur.
Elle est applicable aux perforateurs, aux marteaux perforateurs et aux marteaux rotatifs.
Elle ne couvre pas les exigences spécifiques et les modifications des perceuses à percussion rotatives destinées à être montées dans un châssis.
Elle traite de tous les phénomènes dangereux, situations dangereuses ou événements dangereux significatifs qui sont pertinents pour les perceuses à percussion rotatives lorsqu'elles sont utilisées normalement et lorsqu'elles font l'objet d'un mauvais usage raisonnablement prévisible par le fabricant, à l'exception de l'usage des perceuses à percussion rotatives dans une atmosphère potentiellement explosible.

Neelektrična ročna orodja - Varnostne zahteve - 5. del: Rotacijski udarni vrtalniki (ISO 11148-2:2011)

Ta standard se uporablja za neelektrična ročna orodja, ki jih poganjajo rotacijski ali linearni motorji na stisnjen zrak, hidravlično tekočino ali motorje z notranjim izgorevanjem, namenjena za uporabo z enim upravljavcem, pri čemer jih podpira: – upravljavec z roko ali rokami, ali sistem vzmetenja, npr. izravnalnik, – ročno orodje, ki se ga lahko vpne.

General Information

• Status: Published
• Publication Date: 30-Nov-2011
• Withdrawal Date: 29-Jun-2012
• ICS: 25.140.10 - Pneumatic tools
• ICS: 25.140.99 - Other hand-held tools
• Technical Committee: CEN/TC 255 - Hand-held, non-electric power tools - Safety
• Drafting Committee: CEN/TC 255 - Hand-held, non-electric power tools - Safety
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-Dec-2011
• Due Date: 23-Nov-2010
• Completion Date: 01-Dec-2011
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN ISO 11148-5:2012 - Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-2:2011)

Relations

• Replaces: EN 792-5:2000+A1:2008 - Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills
• Effective Date: 08-Jun-2022
• Revised: EN 792-5:2000 - Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Handgehaltene nichtelektrisch betriebene Maschinen Sicherheitsanforderungen Teil 5: Schlagbohrmaschinen (ISO 11148-2:2011)Machines portatives à moteur non électrique - Exigences de sécurité - Partie 5: Perceuses à percussion rotatives (ISO 11148-2:2011)Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-2:2011)25.140.10Pneumatic toolsICS:Ta slovenski standard je istoveten z:EN ISO 11148-5:2011SIST EN ISO 11148-5:2012en,fr01-februar-2012SIST EN ISO 11148-5:2012SLOVENSKI
STANDARDSIST EN 792-5:2000+A1:20081DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 11148-5
December 2011 ICS 25.140.10 Supersedes EN 792-5:2000+A1:2008English Version
Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011)
Machines portatives à moteur non électrique - Exigences de sécurité - Partie 5: Perceuses à percussion rotatives (ISO 11148-5:2011)
Handgehaltene nicht elektrisch betriebene Maschinen - Sicherheitsanforderungen - Teil 5: Schlagbohrmaschinen (ISO 11148-5:2011) This European Standard was approved by CEN on 12 November 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 11148-5:2011: ESIST EN ISO 11148-5:2012

European
Standard and the Essential Requirements
of EU Directive 2006/42/EC .4 SIST EN ISO 11148-5:2012

European
Standard and the Essential Requirements
of EU Directive 2006/42/EC This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide a means of conforming to Essential Requirements of the New Approach Directive 2006/42/EC on machinery. Once this standard is cited in the Official Journal of the European Union under that Directive and has been implemented as a national standard in at least one Member State, compliance with the clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the corresponding Essential Requirements of that Directive except ER 1.5.7 and associated EFTA regulations. WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard.
Reference numberISO 11148-5:2011(E)© ISO 2011
INTERNATIONAL STANDARD ISO11148-5First edition2011-12-01Hand-held non-electric power tools — Safety requirements — Part 5: Rotary percussive drills Machines portatives à moteur non électrique — Exigences de sécurité — Partie 5: Perceuses à percussion rotatives
ISO 11148-5:2011(E)
©
ISO 2011 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56  CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
[e-mail] Web
www.iso.org Published in Switzerland
ii © ISO 2011 – All rights reserved
ISO 11148-5:2011(E) © ISO 2011 – All rights reserved iii Contents Page Foreword . iv Introduction . v 1 Scope . 1 2 Normative references . 1 3 Terms and definitions . 2 3.1 General terms and definitions . 2 3.2 Terms and definitions related to rotary percussive power tools . 4 4 Safety requirements and/or protective measures . 4 4.1 General . 4 4.2 Mechanical safety . 4 4.3 Thermal safety . 5 4.4 Noise reduction . 5 4.5 Vibration . 6 4.6 Materials and substances processed, used or exhausted . 6 4.7 Ergonomics . 7 4.8 Controls . 7 5 Verification . 8 5.1 General conditions for tests . 8 5.2 Noise . 8 5.3 Vibration . 8 5.4 Unintentional start . 8 5.5 Power tool construction . 9 5.6 Structure of verification . 9 6 Information for use . 9 6.1 Marking, signs and written warnings . 9 6.2 Instruction handbook . 10 6.3 Operating instructions . 15 6.4 Data . 16 6.5 Maintenance instructions . 17 Annex A (informative)
List of significant hazards . 18 Annex B (informative)
Examples of rotary percussive drills covered by this part of ISO 11148 . 19 Annex C (normative)
Symbols for labels and signs . 20 Annex D (normative)
Additional safety requirements related to internal combustion engine power tools . 21 Bibliography . 25
ISO 11148-5:2011(E) iv © ISO 2011 – All rights reserved Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 11148-5 was prepared by Technical Committee ISO/TC 118, Compressors and pneumatic tools, machines and equipment, Subcommittee SC 3, Pneumatic tools and machines. ISO 11148 consists of the following parts, under the general title Hand-held non-electric power tools — Safety requirements:  Part 1: Assembly power tools for non-threaded mechanical fasteners  Part 2: Cutting-off and crimping power tools  Part 3: Drills and tappers  Part 4: Non-rotary percussive power tools  Part 5: Rotary percussive drills  Part 6: Assembly power tools for threaded fasteners  Part 7: Grinders  Part 8: Sanders and polishers  Part 9: Die grinders
 Part 10: Compression power tools  Part 11: Nibblers and shears  Part 12: Circular, oscillating and reciprocating saws
A part 13, dealing with fastener driving tools, is under preparation. SIST EN ISO 11148-5:2012

ISO 11148-5:2011(E) © ISO 2011 – All rights reserved v Introduction This document is a type-C standard as stated in ISO 12100. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are defined in the Scope of this part of ISO 11148. When requirements of this type-C standard are different from those which are stated in type-A or -B standards, the requirements of this type-C standard take precedence over the requirements of other standards, for machines that have been designed and built according to the requirements of this type-C standard. ISO 11148 consists of a number of independent parts for individual types of hand-held non-electric power tools. Certain parts of ISO 11148 cover ha
...