EN 2713-012:2022
(Main)Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Part 012: MNA (1 core), MNB (pair), MNC (3 cores), MND (4 cores), cables family - Silver-plated copper screened (spiral) and jacketed, UV laser printable - Product standard
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Part 012: MNA (1 core), MNB (pair), MNC (3 cores), MND (4 cores), cables family - Silver-plated copper screened (spiral) and jacketed, UV laser printable - Product standard
This document specifies the characteristics of UV laser printable, single and multicore silver-plated copper screened (spiral) and jacketed electrical cables for use in the on-board electrical systems of aircraft, at operating temperatures between −55 °C and 200 °C.
It is also possible to mark these cables by qualified compatible marking. These markings are in accordance with EN 3838.
Luft- und Raumfahrt - Leitungen, elektrisch, ein- und mehradrig, für allgemeine Verwendung - Betriebstemperaturen zwischen -55 °C und 200 °C - Teil 012: MNA- (einadrig), MNB- (zweiadrig), MNC- (dreiadrig), MND- (vieradrig) Leitungsfamilie - Mit versilbertem Kupfergeflecht geschirmt (Umseilung) und ummantelt, UV-Laser-bedruckbar - Produktnorm
Dieses Dokument legt die Eigenschaften von UV Laser bedruckbaren, ein und mehradrigen, mit versilbertem Kupfergeflecht geschirmten (Umseilung) und ummantelten elektrischen Leitungen fest, die zur Verwendung in Bordnetzen von Luftfahrzeugen bei Betriebstemperaturen zwischen−55 °C und 200 °C bestimmt sind.
Es ist auch möglich, diese Leitungen mit einer qualifizierten passenden Kennzeichnung zu versehen. Diese Kennzeichnungen entsprechen EN 3838.
Série aérospatiale - Câbles, électriques, mono et multiconducteurs d'usage general - Températures de fonctionnement comprises entre -55 °C et 200 °C - Partie 012 : MNA (1 élément), MNB (paire), MNC (tierce), MND (quarte), série de câbles multiconducteurs à blindage cuivre argenté (guipés et gainés), marquables au laser UV - Norme de produit
Le présent document spécifie les caractéristiques des câbles électriques, mono et multiconducteurs, en cuivre argenté, blindés (guipés) et gainés, marquables au laser UV, et destinés à être utilisés dans les systèmes électriques à bord des aéronefs à des températures de fonctionnement comprises entre −55 °C et 200 °C.
Il est également possible de marquer ces câbles par des marquages compatibles qualifiés. Ces marquages sont conformes à l’EN 3838.
Aeronavtika - Eno- ali večžilni električni kabli za splošno uporabo - Delovne temperature med –55 °C in 200 °C - 012. del: MNA (1 jedro), MNB (združitev), MNC (3 jedra), MND (4 jedra), družina kablov - Posrebren baker, oklopljen (spirala) in oplaščen, z možnostjo UV-laserskega tiskanja - Standard za proizvod
Ta dokument določa značilnosti eno- ali večžilnih, oklopljenih (spirala) ali oplaščenih električnih kablov iz posrebrenega bakra z možnostjo UV-laserskega tiskanja za uporabo v električnih sistemih na krovu letala pri obratovalnih temperaturah med −55 °C in 200 °C.
Te kable je mogoče označiti tudi s kvalificirano združljivo oznako. Te oznake so v skladu s standardom EN 3838.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 2713-012:2022
01-april-2022
Nadomešča:
SIST EN 2713-012:2017
Aeronavtika - Eno- ali večžilni električni kabli za splošno uporabo - Delovne
temperature med –55 °C in 200 °C - 012. del: MNA (1 jedro), MNB (združitev), MNC
(3 jedra), MND (4 jedra), družina kablov - Posrebren baker, oklopljen (spirala) in
oplaščen, z možnostjo UV-laserskega tiskanja - Standard za proizvodAerospace series - Cables, electrical, single and multicore for general purpose -
Operating temperatures between -55 °C and 200 °C - Part 012: MNA (1 core), MNB(pair), MNC (3 cores), MND (4 cores), cables family - Silver-plated copper screened
(spiral) and jacketed, UV laser printable - Product standardLuft- und Raumfahrt - Leitungen, elektrisch, ein- und mehradrig, für allgemeine
Verwendung - Betriebstemperaturen zwischen -55 °C und 200 °C - Teil 012: MNA-
(einadrig), MNB- (zweiadrig), MNC- (dreiadrig), MND- (vieradrig) Leitungsfamilie, mit
versilbertem - Kupfergeflecht geschirmt (Umseilung) und ummantelt, UV-Laser-bedruckbar - Produktnorm
Série aérospatiale - Câbles, électriques, mono et multiconducteurs d'usage general -
Températures de fonctionnement comprises entre -55 °C et 200 °C - Partie 012 : MNA (1
élément), MNB (paire), MNC (tierce), MND (quarte), série de câbles multiconducteurs à
blindage cuivre argenté (guipés et gainés), marquables au laser UV - Norme de produit
Ta slovenski standard je istoveten z: EN 2713-012:2022ICS:
29.060.20 Kabli Cables
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
SIST EN 2713-012:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------SIST EN 2713-012:2022
---------------------- Page: 2 ----------------------
SIST EN 2713-012:2022
EN 2713-012
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2022
EUROPÄISCHE NORM
ICS 49.060 Supersedes EN 2713-012:2017
English Version
Aerospace series - Cables, electrical, single and multicore
for general purpose - Operating temperatures between -55
°C and 200 °C - Part 012: MNA (1 core), MNB (pair), MNC
(3 cores), MND (4 cores), cables family - Silver-plated
copper screened (spiral) and jacketed, UV laser printable -
Product standard
Série aérospatiale - Câbles, électriques, mono et Luft- und Raumfahrt - Leitungen, elektrisch, ein- und
multiconducteurs d'usage general - Températures de mehradrig, für allgemeine Verwendung -
fonctionnement comprises entre -55 °C et 200 °C - Betriebstemperaturen zwischen -55 °C und 200 °C -
Partie 012 : MNA (1 élément), MNB (paire), MNC Teil 012: MNA- (einadrig), MNB- (zweiadrig), MNC-
(tierce), MND (quarte), série de câbles (dreiadrig), MND- (vieradrig) Leitungsfamilie, mit
multiconducteurs à blindage cuivre argenté (guipés et versilbertem - Kupfergeflecht geschirmt (Umseilung)
gainés), marquables au laser UV - Norme de produit und ummantelt, UV-Laser-bedruckbar - Produktnorm
This European Standard was approved by CEN on 8 November 2021.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2713-012:2022 E
worldwide for CEN national Members.---------------------- Page: 3 ----------------------
SIST EN 2713-012:2022
EN 2713-012:2022 (E)
Contents Page
European foreword ............................................................................................................................................ 3
1 Scope .......................................................................................................................................................... 4
2 Normative references .......................................................................................................................... 4
3 Terms and definitions ......................................................................................................................... 4
4 Materials and construction ............................................................................................................... 4
4.1 Materials .................................................................................................................................................. 4
4.2 Construction ........................................................................................................................................... 5
4.3 Colour-coding of cores and jacket ................................................................................................... 7
5 Required characteristics .................................................................................................................... 7
6 Quality assurance ................................................................................................................................. 9
7 Designation ............................................................................................................................................. 9
8 Identification and marking ............................................................................................................... 9
9 Packaging, labelling and delivery lengths ................................................................................... 9
10 Technical specification ....................................................................................................................... 9
Bibliography ....................................................................................................................................................... 10
---------------------- Page: 4 ----------------------SIST EN 2713-012:2022
EN 2713-012:2022 (E)
European foreword
This document (EN 2713-012:2022) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.This document shall be given the status of a national standard, either by publication of an identical text
or by endorsement, at the latest by August 2022, and conflicting national standards shall be withdrawn
at the latest by August 2022.Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.[This document supersedes EN 2713-012:2017.]
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this document: Austria, Belgium, Bulgaria, Croatia, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
Kingdom.--------------------
...
SLOVENSKI STANDARD
oSIST prEN 2713-012:2021
01-september-2021
Aeronavtika - Eno- ali večžilni električni kabli za splošno uporabo - Delovne
temperature med –55 °C in 200 °C - 012. del: MNA (1 jedro), MNB (združitev), MNC
(3 jedra), MND (4 jedra), družina kablov - Posrebren baker, oklopljen (spirala) in
oplaščen, z možnostjo UV-laserskega tiskanja - Standard za proizvodAerospace series - Cables, electrical, single and multicore for general purpose -
Operating temperatures between -55 °C and 200 °C - Part 012: MNA (1 core), MNB(pair), MNC (3 cores), MND (4 cores), cables family - Silver-plated copper screened
(spiral) and jacketed, UV laser printable - Product standardLuft- und Raumfahrt - Leitungen, elektrisch, ein- und mehradrig, für allgemeine
Verwendung - Betriebstemperaturen zwischen -55 °C und 200 °C - Teil 012: MNA-
(einadrig), MNB- (zweiadrig), MNC- (dreiadrig), MND- (vieradrig) Leitungsfamilie, mit
versilbertem - Kupfergeflecht geschirmt (Umseilung) und ummantelt, UV-Laser-bedruckbar - Produktnorm
Série aérospatiale - Câbles, électriques, mono et multiconducteurs d'usage general -
Températures de fonctionnement comprises entre -55 °C et 200 °C - Partie 012 : MNA (1
élément), MNB (paire), MNC (tierce), MND (quarte), série de câbles multiconducteurs à
blindage cuivre argenté (guipés et gainés), marquables au laser UV - Norme de produit
Ta slovenski standard je istoveten z: prEN 2713-012ICS:
29.060.20 Kabli Cables
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 2713-012:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN 2713-012:2021
---------------------- Page: 2 ----------------------
oSIST prEN 2713-012:2021
DRAFT
EUROPEAN STANDARD
prEN 2713-012
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2021
ICS 49.060 Will supersede EN 2713-012:2017
English Version
Aerospace series - Cables, electrical, single and multicore
for general purpose - Operating temperatures between -55
°C and 200 °C - Part 012: MNA (1 core), MNB (pair), MNC
(3 cores), MND (4 cores), cables family - Silver-plated
copper screened (spiral) and jacketed, UV laser printable -
Product standard
Série aérospatiale - Câbles, électriques, mono et Luft- und Raumfahrt - Leitungen, elektrisch, ein- und
multiconducteurs d'usage general - Températures de mehradrig, für allgemeine Verwendung -
fonctionnement comprises entre -55 °C et 200 °C - Betriebstemperaturen zwischen -55 °C und 200 °C -
Partie 012 : MNA (1 élément), MNB (paire), MNC Teil 012: MNA- (einadrig), MNB- (zweiadrig), MNC-
(tierce), MND (quarte), série de câbles (dreiadrig), MND- (vieradrig) Leitungsfamilie, mit
multiconducteurs à blindage cuivre argenté (guipés et versilbertem - Kupfergeflecht geschirmt (Umseilung)
gainés), marquables au laser UV - Norme de produit und ummantelt, UV-Laser-bedruckbar - Produktnorm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 2713-012:2021 E
worldwide for CEN national Members.---------------------- Page: 3 ----------------------
oSIST prEN 2713-012:2021
prEN 2713-012:2021 (E)
Contents Page
European foreword ...................................................................................................................................................... 3
1 Scope .................................................................................................................................................................... 4
2 Normative references .................................................................................................................................... 4
3 Terms and definitions ................................................................................................................................... 4
4 Materials and construction ......................................................................................................................... 5
4.1 Materials ............................................................................................................................................................ 5
4.2 Construction ..................................................................................................................................................... 5
4.3 Colour-coding of cores and jacket ............................................................................................................. 7
5 Required characteristics .............................................................................................................................. 7
6 Quality assurance ........................................................................................................................................... 9
7 Designation ....................................................................................................................................................... 9
8 Identification and marking ......................................................................................................................... 9
9 Packaging, labelling and delivery lengths ............................................................................................. 9
10 Technical specification ................................................................................................................................. 9
Bibliography ................................................................................................................................................................. 10
---------------------- Page: 4 ----------------------oSIST prEN 2713-012:2021
prEN 2713-012:2021 (E)
European foreword
This document (prEN 2713-012:2021) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.This document is currently submitted to the CEN Enquiry.
This document will supersede EN 2713-012:2017.
---------------------- Page: 5 ----------------------
oSIST prEN 2713-012:2021
prEN 2713-012:2021 (E)
1 Scope
This document specifies the characteristics of UV
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.