EN 603-2:2024

Aluminium and aluminium alloys - Wrought forging stock - Part 2: Mechanical properties

This document, part of EN 603 series of standards, specifies the mechanical properties of wrought forging stock in aluminium and aluminium alloys for general engineering applications.
The chemical composition and temper designations for these alloys are specified in EN 573 3 and EN 515 respectively.

Aluminium und Aluminiumlegierungen - Stranggepresstes oder gewalztes Schmiedevormaterial - Teil 2: Mechanische Eigenschaften

Dieses Dokument, das Teil der Normenreihe EN 603 ist, legt die mechanischen Eigenschaften von stranggepresstem und gewalztem Schmiedevormaterial aus Aluminium und Aluminiumlegierungen für allgemeine technische Anwendungen fest.
Die chemische Zusammensetzung und die Bezeichnungen der Werkstoffzustände für diese Legierungen werden in EN 573 3 und EN 515 beschrieben.

Aluminium et alliages d'aluminium - Produits corroyés destinés à la forge - Partie 2 : Caractéristiques mécaniques

Le présent document, qui fait partie de la série de normes EN 603, spécifie les caractéristiques mécaniques des produits corroyés en aluminium et alliages d'aluminium destinés à la forge pour applications techniques générales.
La composition chimique et la désignation des états métallurgiques de ces alliages sont respectivement spécifiées dans l'EN 573 3 et l'EN 515.

Aluminij in aluminijeve zlitine - Valjani material za kovanje - 2. del: Mehanske lastnosti

General Information

• Status: Published
• Publication Date: 17-Sep-2024
• ICS: 77.150.10 - Aluminium products
• Technical Committee: CEN/TC 132 - Aluminium and aluminium alloys
• Drafting Committee: CEN/TC 132 - Aluminium and aluminium alloys
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 18-Sep-2024
• Due Date: 10-Sep-2025
• Completion Date: 18-Sep-2024
• Ref Project: SIST EN 603-2:2024 - Aluminium and aluminium alloys - Wrought forging stock - Part 2: Mechanical properties

Relations

• Replaces: EN 603-2:1996 - Aluminium and aluminium alloys - Wrought forging stock - Part 2: Mechanical properties
• Effective Date: 07-Jun-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2024
Aluminij in aluminijeve zlitine - Valjani material za kovanje - 2. del: Mehanske
lastnosti
Aluminium and aluminium alloys - Wrought forging stock - Part 2: Mechanical properties
Aluminium und Aluminiumlegierungen - Stranggepresstes oder gewalztes
Schmiedevormaterial - Teil 2: Mechanische Eigenschaften
Aluminium et alliages d'aluminium - Produits corroyés destinés à la forge - Partie 2:
Caractéristiques mécaniques
Ta slovenski standard je istoveten z: EN 603-2:2024
ICS:
77.150.10 Aluminijski izdelki Aluminium products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 603-2
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2024
EUROPÄISCHE NORM
ICS 77.150.10 Supersedes EN 603-2:1996
English Version
Aluminium and aluminium alloys - Wrought forging stock -
Part 2: Mechanical properties
Aluminium et alliages d'aluminium - Produits corroyés Aluminium und Aluminiumlegierungen -
destinés à la forge - Partie 2 : Caractéristiques Stranggepresstes oder gewalztes
mécaniques Schmiedevormaterial - Teil 2: Mechanische
Eigenschaften
This European Standard was approved by CEN on 14 July 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N

EUROPÄISCHES KOMITEE FÜR NORMUN G

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 603-2:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Tensile testing . 4
5 Mechanical properties . 4
5.1 Extruded forging stock . 4
5.2 Rolled forging stock . 7
6 Electrical conductivity . 7
Annex A (normative) Rules for rounding . 8
Bibliography . 9
European foreword
This document (EN 603-2:2024) has been prepared by Technical Committee CEN/TC 132 “Aluminium
and aluminium alloys”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2025, and conflicting national standards shall be
withdrawn at the latest by March 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 603-2:1996.
— application of last CEN template to the introductory text of Clause 2 Normative references;
— replacement of withdrawn standard EN 10002-1 by EN ISO 6892-1 in Clause 2 Normative
references;
— application of last CEN template to Clause 3 Terms and definitions;
— introduction of Standard EN ISO 6892-1 instead of withdrawn standard EN 10002-1 in Clause 4
Tensile testing;
— move of former text from Note in Table 9 to Clause 6;
— introduction of mechanical properties for alloy EN AW-2033 in new Table 3;
— introduction of mechanical properties for alloy EN AW-2077 in new Table 4;
— introduction of mechanical properties for alloy EN AW-6026 in new Table 7;
— minor text changes.
EN 603 comprises the following parts under the general title Aluminium and aluminium alloys - Wrought
forging stock:
— Part 1: Technical conditions for inspection and delivery;
— Part 2: Mechanical properties;
— Part 3: tolerances on dimensions and form.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United
Kingdom.
1 Scope
This document, part of EN 603 series of standards, specifies the mechanical properties of wrought forging
stock in aluminium and aluminium alloys for general engineering applications.
The che
...