Tests for filler aggregate used in bituminous mixtures - Part 1: Delta ring and ball test

This European Standard specifies the procedure used to determine the stiffening effect of filler aggregate when mixed with bitumen.

Prüfverfahren für mineralische Füller in bitumenhaltigen Mischungen - Teil 1: Delta-Ring- und Kugel-Verfahren

Diese Europäische Norm legt das Verfahren für die Bestimmung der versteifenden Wirkung mineralischer Füller fest, wenn sie mit Bitumen gemischt werden.

Essais sur les fillers utilisés dans les mélanges bitumineux - Partie 1: Essai bille-anneau

La présente norme européenne spécifie le mode opératoire permettant de déterminer le pouvoir rigidifiant des fillers mélangés au bitume.

Preskus kamene moke za bitumenske zmesi - 1. del: Delta preskus prstan-kroglica

Ta evropski standard določa postopek, ki se uporablja za določevanje utrditvenega učinka kamene moke, ko je zmešana z bitumnom.

General Information

Status
Published
Publication Date
09-Jul-2013
Withdrawal Date
30-Jan-2014
Technical Committee
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
23-May-2019

Relations

Buy Standard

Standard
EN 13179-1:2013
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Preskus kamene moke za bitumenske zmesi - 1. del: Delta preskus prstan-kroglicaPrüfverfahren für mineralische Füller in bitumenhaltigen Mischungen - Teil 1: Delta-Ring- und Kugel-VerfahrenEssais sur les fillers utilisés dans les mélanges bitumineux - Partie 1: Essai bille-anneauTests for filler aggregate used in bituminous mixtures - Part 1: Delta ring and ball test75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:EN 13179-1:2013SIST EN 13179-1:2013en,fr,de01-oktober-2013SIST EN 13179-1:2013SLOVENSKI
STANDARDSIST EN 13179-1:20021DGRPHãþD



SIST EN 13179-1:2013



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13179-1
July 2013 ICS 75.140 Supersedes EN 13179-1:2000English Version
Tests for filler aggregate used in bituminous mixtures - Part 1: Delta ring and ball test
Essais sur les fillers utilisés dans les mélanges bitumineux - Partie 1: Essai bille-anneau
Prüfverfahren für mineralische Füller in bitumenhaltigen Mischungen - Teil 1: Delta-Ring- und Kugel-Verfahren This European Standard was approved by CEN on 30 May 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13179-1:2013: ESIST EN 13179-1:2013



EN 13179-1:2013 (E) 2 Contents Page Foreword . 3 1 Scope. 4 2 Normative references . 4 3 Terms and definitions . 4 4 Principle . 5 5 Apparatus . 5 6 Preparation of test portion . 5 7 Procedure . 6 8 Calculation and expression of results . 7 9 Test report . 7 9.1 Required data . 7 9.2 Optional data . 7
SIST EN 13179-1:2013



EN 13179-1:2013 (E) 3 Foreword This document (EN 13179-1:2013) has been prepared by Technical Committee CEN/TC 154 “Aggregates”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2014, and conflicting national standards shall be withdrawn at the latest by January 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible fo
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.